{"product_id":"sea-hawk-talon-antifoulant","title":"Sea Hawk Talon Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk Talon Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eThe Sea Hawk Talon is a semi hard hybrid ablative antifouling copper based bottom paint. Can be applied over most antifouling coatings and combats aggressively all types of salt and fresh water marine fouling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent viscosity provides better flow and rolling ability\u003c\/li\u003e\n\u003cli\u003eCan be applied over other modified epoxy antifouling paints\u003c\/li\u003e\n\u003cli\u003eValue priced semi hard hybrid ablative antifouling paint\u003c\/li\u003e\n\u003cli\u003e33.6% cuprous oxide - highest grade available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Sea Hawk Talon Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk TALON Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using Sea Hawk 2053. TALON has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e:  359 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Bursh, Rolling, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness\u003c\/strong\u003e: 3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness\u003c\/strong\u003e: 5.0 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness\u003c\/strong\u003e: 2.2 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp\u003c\/strong\u003e: 50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner\u003c\/strong\u003e: If necessary maximum 10% with Sea Hawk 2033 or 2035\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eKnown Compatibility of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply minimum 2 coats of TALON. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eUnknown Compatibility of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of TALON. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePoor condition of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/li\u003e\n\u003cli\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of TALON. Allow 3-6 hours between coats and a minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of TALON. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Sanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of TALON. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of contaminants.\u003c\/li\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply two coats of TALON. Apply first coat thinned 20% and let dry overnight. Apply two more coats allowing 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel\/Aluminum Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Based Antifoulant Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.\u003c\/li\u003e\n\u003cli\u003eSeal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of TALON, allow 3-6 hours between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper-Free Antifouling Application for Aluminum Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of TALON, allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Sea Hawk Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea_Hawk_Mission_Bay_App_Guide.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e \u003cstrong\u003eClick Here to Download Sea Hawk Talon Bottom Paint Application Guide\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098118291590,"sku":"S-H-6045GL","price":134.55,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098118324358,"sku":"S-H-6042GL","price":134.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Talon_Bottom_Paint__24248.jpg?v=1770148332","url":"https:\/\/truewindmarine.com\/products\/sea-hawk-talon-antifoulant","provider":"True Wind Marine","version":"1.0","type":"link"}