{"product_id":"rubberized-deck-coating","title":"Tuff Coat Rubberized Non-Skid Deck Coating","description":"\u003ch2 class=\"classyunicodedone\"\u003eTuff Coat Rubberized Non-Skid Marine Non Submersible Deck Coating - Gallon\u003c\/h2\u003e\n\u003cp\u003eTuff Coat Rubberized Non-Skid Deck Coating provides durable protection for boats, docks, and ramps using recycled rubber crumb aggregate in a polyurethane formula. This VOC-free coating covers 40-45 square feet per gallon and can be applied by spray, brush, or roller. It creates a waterproof, non-slip surface that resists UV rays, chemicals, acids, solvents, and impacts while reducing noise on aluminum boats. Available in 17 colors including whites, grays, blues, and safety yellow, it dries to a matte finish that's easy to clean. Requires Tuff Coat Primer for proper adhesion and works best between 40°F and 120°F.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage - 1 Gallon of Tuff Coat covers approximately 40-45 square feet\u003c\/li\u003e\n\u003cli\u003eSurfaces covered with Tuff Coat Rubberized Deck Coating must be primed with Tuff Coat Primer (See note below)\u003c\/li\u003e\n\u003cli\u003eHelps to prevent slipping and injury\u003c\/li\u003e\n\u003cli\u003eDeadens and absorbs noise\u003c\/li\u003e\n\u003cli\u003eNOTE: due to the nature of the rubberized ‘crumbs’, the paint texture may vary when applied\u003c\/li\u003e\n\u003cli\u003eNon-toxic and environmentally friendly(no VOC's)\u003c\/li\u003e\n\u003cli\u003eConsists of recycled rubber crumb aggregate-non abrasive\u003c\/li\u003e\n\u003cli\u003eUV resistant pigments \u0026amp; stabilizers enhance protection\u003c\/li\u003e\n\u003cli\u003eTuff Coat Rubberized Deck Coating protects surfaces and decks against chemicals such as acids, solvents, fuels, chlorine, salts, etc.\u003c\/li\u003e\n\u003cli\u003eResists impact\u003c\/li\u003e\n\u003cli\u003eWaterproofs wood decking\u003c\/li\u003e\n\u003cli\u003eCan be sprayed, brushed, or roller applied, easy for the beginner\u003c\/li\u003e\n\u003cli\u003eDries to a quick, easy to clean finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eColors Available \u003c\/p\u003e\n\u003cp\u003eUT-112 Medium Blue, UT-110 Light Blue, UT-118 Waterpark Blue, UT-119 White, UT-109 Keywest Sand, UT-116 Sand, UT-117 Tan, UT-105 Dark Brown, UT-114 Olive, UT-108 Green, UT-107 Dark Green, UT-115 Red, UT-102 Brick Red, UT-111 Light Grey, UT-106 Dark Grey, UT-101 Black, UT-221 Safety Yellow\u003c\/p\u003e\n\u003ctable border=\"0\" cellspacing=\"15\" cellpadding=\"15\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features Eco-Friendly\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-earth.png\" alt=\"Tuff Coat Features Eco-Friendly\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features Recycled Rubber\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-recycle.png\" alt=\"Tuff Coat Features Recycled Rubber\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features UV Resistant\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-step.png\" alt=\"Tuff Coat Features UV Resistant\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features No Mixing\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-one.png\" alt=\"Tuff Coat Features No Mixing\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features DIY Application\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-roller.png\" alt=\"Tuff Coat Features DIY Application\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWater-Based \u0026amp; Eco Friendly\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eRecycled High-Grip Rubber Granules\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUV \u0026amp; Chemical Resistant\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSingle Component - No Mixing\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSimple Do-it-Yourself Application\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemp: 40°F min. - 120°F max. (air, surface, \u0026amp; material)\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 85% maximum\u003c\/li\u003e\n\u003cli\u003eMethod:\u003c\/li\u003e\n\u003cli\u003eRoll – TUFF-Coat® Rollers\u003c\/li\u003e\n\u003cli\u003eSpray – Superior Hopper Gun or Texture Sprayer\u003c\/li\u003e\n\u003cli\u003eFinish: Matte finish\u003c\/li\u003e\n\u003cli\u003eAppearance: Textured colored liquid\u003c\/li\u003e\n\u003cli\u003eRecommended Spread Rate:\u003c\/li\u003e\n\u003cli\u003eWet mils: 50-60\u003c\/li\u003e\n\u003cli\u003eDry mils: 35-40\u003c\/li\u003e\n\u003cli\u003eCoverage: 40-45 Sq. Ft. in 2 coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDrying Schedule\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(20 mils wet @50% RH, 72ºF)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo touch: Approx. 1 hour\u003c\/li\u003e\n\u003cli\u003eTo top coat: Approx. 1-2 hours\u003c\/li\u003e\n\u003cli\u003eTo cure: Approx. 24hrs-5 days for a full chemical cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRoller, Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e40°F or higher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 – Light Traffic | 3 – Heavy Traffic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Tuff Coat Rubberized Deck Coating\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Application Steps\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/application-graphi.jpg\" alt=\"Tuff Coat Application Steps\" width=\"600\" height=\"181\"\u003e\u003c\/p\u003e\n\u003cp\u003ePrior to applying Tuff Coat, stir thoroughly before applying and stir periodically to maintain aggregate in suspension. Dilute the product with clean water\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eonly\u003c\/strong\u003e. A dilution of 10% will reduce the solids within the product by the same amount. Avoid “cracking”: Do not allow Tuff Coat Rubberized Deck Coating to pool and do not apply very thick coats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIt is recommended that you perform a test patch to ensure adhesion before applying fully.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConcrete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMust be fully cured.\u003c\/li\u003e\n\u003cli\u003eIf a concrete surface has a porous texture, no further surface preparation is necessary.\u003c\/li\u003e\n\u003cli\u003eIf the concrete surface is not porous, then acid etching, sanding, or shot blasting is necessary. Make sure to use a light acid etch and remove all remaining acid with soap, water, and a scrub brush.\u003c\/li\u003e\n\u003cli\u003eConcrete should be completely clean and dry.\u003c\/li\u003e\n\u003cli\u003ePatch all imperfections, cracks, etc. with concrete patch filler and flexible joint fillers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euse silicone products, as Tuff Coat Rubberized Deck Coating will not adhere to silicone.\u003c\/li\u003e\n\u003cli\u003ePrime with CP-10 as per instructions on the label. Once the primer has properly cured, apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePainted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressively roughen the surface by sanding with 36 or 40 grit sandpaper. The surface must be rough for proper adhesion.\u003c\/li\u003e\n\u003cli\u003eClean the surface of all oils, grease, dirt, silicone, and other contaminants. Leave no residue.\u003c\/li\u003e\n\u003cli\u003eInspect for any imperfections or delamination of previously painted surfaces.\u003c\/li\u003e\n\u003cli\u003ePrime with CP-10 then apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAsphalt\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface by pressure-washing.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is completely dry before applying asphalt primer.\u003c\/li\u003e\n\u003cli\u003eNext, apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel and Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare metal substrates should be appropriately primed after being treated for rust or removal of old paint.\u003c\/li\u003e\n\u003cli\u003eAll smooth metal should be cleaned, and aggressively roughed by sanding with 36 or 40 grit sandpaper or by acid etch. Acid etch is recommended.\u003c\/li\u003e\n\u003cli\u003eClean and dry surface.\u003c\/li\u003e\n\u003cli\u003ePrime with MP-10 then apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRubber\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 36 or 40 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eClean and dry surface.\u003c\/li\u003e\n\u003cli\u003ePrime with rubber primer then apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlywood, Lumber, and Treated Lumber\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew lumber needs no sanding. Old lumber requires sanding with 36 or 40 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove any peeling, cracking, or chipping paint, varnish, or sealer.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is clean and dry before priming with CP-10.\u003c\/li\u003e\n\u003cli\u003eFinish by applying Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo ensure good adhesion, first sand the surface aggressively using 36 or 40 grit paper to ensure the removal of all gloss from the substrate.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is free of waxes and other protective additives.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is clean and dry before priming with CP-10.\u003c\/li\u003e\n\u003cli\u003eThe final step will be to apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse Ultra TUFF Texture Rollers. The roller must be capable of lifting the rubber crumb within the product to the surface.\u003c\/li\u003e\n\u003cli\u003ePour product into the paint tray and be sure to completely saturate the roller.\u003c\/li\u003e\n\u003cli\u003eApply the first coat as a thin coat. Resaturate roller after each pass. Make 4-5 consecutive passes in the same direction, with each pass right next to the other.\u003c\/li\u003e\n\u003cli\u003eWhen applying, roll in one direction first, then roll in the opposite direction.\u003c\/li\u003e\n\u003cli\u003eOnce an area is covered, run the roller very lightly over it to ensure an even distribution of color and the rubber crumb.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpray\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse only the spray gun recommended or supplied by Tuff Coat.\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eSuperior\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ebrand “Spraying-Mantis” handheld Hopper gun, or equivalent.\u003c\/li\u003e\n\u003cli\u003eSpray water to prime.\u003c\/li\u003e\n\u003cli\u003eHolding the gun approximately 12-24 inches away from the surface, spray an even, light coat over the entire surface.\u003c\/li\u003e\n\u003cli\u003eKeep the spray gun at a 90 degree angle to the surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInformation has been sourced from Ultra TUFF and Ultra TUFF Marine Water-Based Non-skid Polyurethane Coatings Application Instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Tuff-Coat Marine","offers":[{"title":"Black \/ Gal","offer_id":43098112688262,"sku":"TUF-UT-101","price":84.28,"currency_code":"USD","in_stock":false},{"title":"Dark Brown \/ Gal","offer_id":43098112721030,"sku":"TUF-UT-105","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Dark Gray \/ Gal","offer_id":43098112753798,"sku":"TUF-UT-106","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Keywest Sand \/ Gal","offer_id":43098112786566,"sku":"TUF-UT-109","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Light Blue \/ Gal","offer_id":43098112819334,"sku":"TUF-UT-110","price":93.07,"currency_code":"USD","in_stock":true},{"title":"Light Gray \/ Gal","offer_id":43098112852102,"sku":"TUF-UT-111","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Olive \/ Gal","offer_id":43098112884870,"sku":"TUF-UT-114","price":84.28,"currency_code":"USD","in_stock":false},{"title":"Sandtone \/ Gal","offer_id":43098112917638,"sku":"TUF-UT-116","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Tan \/ Gal","offer_id":43098112950406,"sku":"TUF-UT-117","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Waterpark Blue \/ Gal","offer_id":43098112983174,"sku":"TUF-UT-118","price":113.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Tuff_Coat__36524.jpg?v=1770149050","url":"https:\/\/truewindmarine.com\/products\/rubberized-deck-coating","provider":"True Wind Marine","version":"1.0","type":"link"}