{"title":"Topside Paints","description":"","products":[{"product_id":"bilgekote","title":"Interlux Bilgekote Bilge Enamel Marine Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Bilgekote Bilge Enamel Marine Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux Bilgekote is a fast drying, durable coating formulated for application to bilge areas. This paint helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Features a semi gloss finish and is available in white or gray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHard wearing coating for bilges and bulkheads.\u003c\/li\u003e\n\u003cli\u003eChemical resistance to fumes, fuel and oil.\u003c\/li\u003e\n\u003cli\u003eHigh opacity for thorough coverage.\u003c\/li\u003e\n\u003cli\u003eCleans easily for reduced upkeep.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSold in quarts\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Interlux Bilgekote Marine Paint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method: \u003c\/strong\u003eBrush, roller, or spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003eTwo coats minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e450 sq. ft.\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003eBrushing Liquid 333 or Special Thinner 216\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDry Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  59°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  73°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  95°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Touch Dry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e  3 hours\u003c\/td\u003e\n\u003ctd\u003e  2 hours\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Overcoated By (min)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e  16 hours\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003ctd\u003e  8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass In Good Condition:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eRinse with fresh water and allow to dry.\u003c\/li\u003e\n\u003cli\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/li\u003e\n\u003cli\u003eSand with 180 grade paper. Remove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass In Poor Condition:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean as above.\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply 1-2 coats of Pre-Kote primer.\u003c\/li\u003e\n\u003cli\u003eSand each coat with 120 grit sandpaper then remove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface then wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply Pre-Kote, sand surface and wipe clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Metal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast or grind, remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eWithin 1 hour of abrasion, apply 1 coat of Interprotect 2000E thinned 15-20%.\u003c\/li\u003e\n\u003cli\u003eFollowing the overcoating guidelines for Interprotect 2000E. Apply 1-2 coats of Pre-Kote.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eClear Epoxy\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eRinse with fresh water and allow to dry.\u003c\/li\u003e\n\u003cli\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/li\u003e\n\u003cli\u003eSand with 80 grit paper then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Epoxy Primekote or Interprotect 2000E.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThe surface must be clean and dry.\u003c\/li\u003e\n\u003cli\u003eSand using 180-220 grit paper, then remove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply 2-3 coats of Bilgekote following the proper dry times.\u003c\/li\u003e\n\u003cli\u003eSand between coats using 220-230 grit paper, then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eBilgekote may be applied by roller and brush using the roll and tip method.\u003c\/li\u003e\n\u003cli\u003eBilgekote may also be applied by spray.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Bilgekote_Marine_Paint.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"56\" height=\"53\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/How_to_Apply_Bilgekote_Marine_Paint.pdf?v=1770916898\" title=\"How to Apply BilgeKote Marine Paint\" target=\"_blank\" rel=\"noopener\"\u003eClick to Download Interlux Bilgekote Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Gray \/ Qt.","offer_id":43098111869062,"sku":"ILX-YMA100","price":39.03,"currency_code":"USD","in_stock":true},{"title":"White \/ Qt.","offer_id":43098111901830,"sku":"ILX-YMA102","price":39.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Interlux_Bildgekote_photo__85816.jpg?v=1770917008"},{"product_id":"ez-poxy-enhancer","title":"Pettit EZ-Poxy Topside Finish Performance Enhancer","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ-Poxy Topside Finish Performance Enhancer\u003c\/h2\u003e\n\u003cp\u003ePettit's EZ-Poxy Performance Enhancer is an additive that increases gloss, harness, and longevity of Pettit solvent-based topside paints. Its advanced formulation reacts with the paint it is mixed in to \"cross-link\" polymers within the paint film, providing exceptional durability, gloss-retention, scratch resistance, and longevity. Additionally, this paint accelerates dry time by up to 40% and increases hardness by up to 25%. Unlike other two-part urethanes, paints catalyzed with this hardener can be applied over well-adhered one-part finishes. With Pettit EZ-Poxy Performance Enhancer, achieving a high quality, long lasting yacht finish is easy.\u003c\/p\u003e\n\u003cp\u003eRecommended for use with the following Pettit Paints: EZ-Poxy, EZ-Decks, EZ-Bilge, Captain's Varnish, Flagship Varnish, High Build Varnish, and Captain's Ultra-Clear Varnish. Do not use EZ-Poxy Performance Enhancer in epoxies, lacquers, two-part polyurethanes, or water-based paint systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases gloss, harness, durability and longevity\u003c\/li\u003e\n\u003cli\u003eCompatible with Pettit solvent-based topside finishes\u003c\/li\u003e\n\u003cli\u003eIncreases flow out of brush strokes and roller stipple, providing a high gloss finish\u003c\/li\u003e\n\u003cli\u003eAccelerates dry time by up to 40%\u003c\/li\u003e\n\u003cli\u003eIncreases hardness by up to 25%\u003c\/li\u003e\n\u003cli\u003eRaises gloss by up to 10%\u003c\/li\u003e\n\u003cli\u003eImproves resistance to chemicals and solvents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: 8 oz.\u003c\/li\u003e\n\u003cli\u003eMix Ratio: 16:1 Paint:Hardener by volume\u003c\/li\u003e\n\u003cli\u003eCuring mechanism: Chemical cure\u003c\/li\u003e\n\u003cli\u003eVOC: 604 g\/l\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Use Pettit EZ-Poxy Performance Enhancer\u003c\/h2\u003e\n\u003cp\u003eThe substrate and air temperatures must be between 50°F and 90°F throughout the entire mixing, application, and curing process. For best results when applying multiple coats, EZ-Poxy Performance Enhancer should be added to all the layers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix Ratio:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e16:1 Paint:Hardener by volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp\u003c\/strong\u003e: 50°F  Min \/ 90°F Max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStir EZ-Poxy Performance Enhancer and paint or varnish thoroughly before mixing. EZ-Poxy Performance Enhancer should be mixed at a 16:1 ratio of paint to catalyst. The entire 8 ounce can of EZ-Poxy Performance Enhancer should be mixed with a gallon of paint. Add two ounces, or six cap-fulls of hardener per quart. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePaints mixed with EZ-Poxy Performance Enhancer do not require an induction time, so once mixed, application should begin immediately.\u003c\/li\u003e\n\u003cli\u003eThe mixed paint can be applied by brush and\/or roller. DO NOT SPRAY.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor brush or roller application, the paint may be thinner 5-10% to aid in flow out and to maintain a wet edge.\u003c\/li\u003e\n\u003cli\u003eIn hot weather and when using darker colors, the paint may be thinned up to 20%.\u003c\/li\u003e\n\u003cli\u003eFor best results on large, smooth surfaces, roll out using a high density foam roller. Level off with the tip of a brush.\u003c\/li\u003e\n\u003cli\u003eApply one thin coat per day. After an overnight dry, lightly sand with 320-grit sandpaper and apply a second coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-EZ-Poxy-Performance-Enhancer-Data-Sheet.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"52\" height=\"50\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit-EZ-Poxy-Performance-Enhancer-Data-Sheet.pdf?v=1771379334\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eClick to Download Pettit EZ-Poxy Performance Enhancer Data Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"8 Oz","offer_id":43098115375238,"sku":"PET-3021","price":27.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/ezpoxy-performance-enhancer__74253.jpg?v=1771379379"},{"product_id":"ez-poxy","title":"Pettit Easypoxy High Gloss Topside Marine Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ Poxy High Gloss Topside Marine Paint\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003ePettit Easypoxy delivers professional-grade protection for above-waterline boat surfaces with its advanced polyurethane formula. This high-gloss topside paint resists fading, chalking, and UV damage while standing up to saltwater, weather exposure, and general wear. The self-leveling formula applies smoothly by brush, roller, or spray, covering up to 600 square feet per gallon. Available in 34 colors with quart and gallon sizes, it works on properly prepared fiberglass, wood, and metal surfaces. Apply at least two coats between 50°F and 90°F for optimal results and long-lasting durability in harsh marine conditions.\u003c\/p\u003e\n\u003cp\u003eNOTE: Ground-shipped within the Continental U.S. only.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eFeatures\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHigh-Gloss Finish: This high-gloss marine paint creates a stunning finish that resists fading and chalking, providing a durable and sleek aesthetic. Its UV-resistant properties prevent fading even with constant sunlight exposure.\u003c\/li\u003e\n\u003cli\u003eDurable and Weather-Resistant Formula: Pettit topside paint is formulated to withstand the harsh marine environment. Its durability protects against abrasion, scratches, and wear caused by exposure to saltwater, wind, and weather.\u003c\/li\u003e\n\u003cli\u003eEasy Application: Both experienced boaters and beginners can apply Pettit EZ Poxy to achieve a professional finish. Use a brush, roller, or sprayer, and let its self-leveling properties and user-friendly formula achieve stunning results. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eFinish: High-gloss\u003c\/li\u003e\n\u003cli\u003eCoverage: Up to 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: At least two coats minimum\u003c\/li\u003e\n\u003cli\u003eColors: 34 colors available; refer to our Pettit paint color chart\u003c\/li\u003e\n\u003cli\u003ePack Size: Available in one quart for all colors and one gallon for White, Hatteras Off-White and Semi-Gloss White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eAssociated Products\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eTo get the best results, pair your Pettit EZ Poxy with these products:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\"\u003ePettit 120 Thinner\u003c\/a\u003e: Use for brushing, rolling, and clean-up\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-121-paint-spraying-thinner-quart\/\"\u003ePettit 121 Thinner\u003c\/a\u003e: Use for spraying\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-easypoxy-high-gloss-topside-marine-paint\/\"\u003ePettit Satin Additive\u003c\/a\u003e: Achieve a semi-gloss to semi-flat finish that reduces glare on deck surfaces and interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-easypoxy-high-gloss-topside-marine-paint\/\"\u003ePettit EZ-Prime\u003c\/a\u003e: Before applying Pettit topside paint, apply a primer as a base coat, particularly on surfaces that are aged, cracked, checked, pitted, rough, or not fully smooth, to ensure optimal adhesion and a flawless finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eHow To Apply Pettit Easypoxy Topside Paint\u003c\/span\u003e\u003c\/h2\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003ePettit EZ Poxy is best applied in temperatures between 50°F and 90°F, with low humidity and no rain. Avoid painting in direct sunlight or extreme heat, which may affect drying and leveling.\u003c\/li\u003e\n\u003cli\u003ePrepare your surface for paint application. Refer to our “Non-Fiberglass Surface Preparation” guide below.\u003c\/li\u003e\n\u003cli\u003eStir the paint thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eApply a thin, even coat with a brush, roller, or spray, and let it dry overnight.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightly sand with 220 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply a second coat and let it cure for 8 to 24 hours, depending on your area’s temperatures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eApplication Notes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eDry Film Thickness per Coat: 1.5 mils (3 wet mils)\u003c\/li\u003e\n\u003cli\u003eCoverage: 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eApplication Temp: 50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003eAvoid applying multiple coats in a single day. Applying excessively thick layers over 4 wet mils can prevent proper drying and produce a soft, under-cured paint film.\u003c\/li\u003e\n\u003cli\u003eAvoid painting on extremely humid days (90°+ RH) or when it’s raining.\u003c\/li\u003e\n\u003cli\u003eAvoid painting outdoors in the late afternoon, as dew can negatively impact the wet paint film and compromise the finish.\u003c\/li\u003e\n\u003cli\u003eIn cooler temperatures, ensure that the air and surface temperatures stay at or above 50°F for at least 8 hours after application to allow proper curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eAlthough thinning Pettit EZ Poxy paint is not recommended for brush or roller applications, up to 10% of Pettit 120 Brushing Thinner can be added in hot weather to help maintain a wet edge. For optimal results on large, smooth surfaces, use a short roller and level it with the tip of a brush.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor traditional spray applications, thin Pettit EZ-Poxy using 15 to 20% of Pettit 121 Spraying Thinner. For airless sprays, use up to 5% and a tip size between 0.11 and 0.15 inches in diameter for proper application.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTemp\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTo Recoat\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTo Launch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e90°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e8 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e70°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e3 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e16 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e50°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e24 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg title=\"pdficon.png\" src=\"https:\/\/lh7-rt.googleusercontent.com\/docsz\/AD_4nXeyVZe_KJUnlG8e_hrIl-1vhFzcNbVkdtesWj6kqFL0KfjQAZJd-F5KGE-02WP64rnzTlp1WjCdGnYHyd0brmhyGAsIscVpw_7IwcHv0XGX0bMbLRO82Gp6evD0UUCOkiGk4gcp?key=cdmlQ1YmmSmNKf5bym2fAF1R\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-EZ-Poxy-Topside-Paint-Application-Information.pdf\"\u003eClick to Download Pettit Easypoxy Application Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eFiberglass Application \u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg src=\"https:\/\/lh7-rt.googleusercontent.com\/docsz\/AD_4nXdfWmKCs_lfvFgYegq63sKG4HOXtr47TgqGeGqbcEJFe8QKe08zfwdoFl2jBWnq5Zn8OidbqvSWQ7wYI2quSnofclQnUwki3sGs2yyClT1HhhOQwsv-fByqrbabL01i2Ql_AYAM?key=cdmlQ1YmmSmNKf5bym2fAF1R\" alt=\"\" width=\"579\" height=\"251\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eNon-Fiberglass Application \u003c\/h3\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eBare Wood\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eSand bare wood with 80 to 120 grit sandpaper until smooth. If the wood has been epoxied, scrub thoroughly with an ammonia\/water solution, sand with 120 grit, and clean with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eUse 7050 EZ-Fair Epoxy Fairing Compound to fill screw heads or small holes. Sand the filled areas flush and clean with the same thinner.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 2018 EZ WoodSealer to seal the porous grain. For epoxied wood, skip the sealer and move directly to priming.\u003c\/li\u003e\n\u003cli\u003eApply one or two coats of 6149 EZ Prime, sanding each coat with 80-120 grit sandpaper and cleaning with Pettit 120 Thinner between coats until a smooth base is achieved.\u003c\/li\u003e\n\u003cli\u003eOnce the primed surface is clean and smooth, proceed with the first coat of Pettit Easypoxy for a durable, high-gloss finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSteel Hulls\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eClean the surface to a bright finish by sandblasting or grinding, then remove any blast residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 6980 Rustlok Primer and let it dry until tacky. For rough surfaces, apply a coat of 6627 Tie-Coat Primer. Sand before cleaning with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eRepeat as needed until smooth, then apply the first coat of Pettit EZ Poxy.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eAluminum\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eRemove oil and grease using Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eUse a medium-grit emery cloth to remove oxidation, etch the surface, and then clean off any sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a thin coat of 6455\/044 Metal Primer and let it dry for at least two hours. Optionally, use 6149 EZ Prime for additional smoothing before applying the first coat\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this paint require a primer before application?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, Pettit EZ Poxy requires a primer when applied to bare surfaces such as fiberglass, wood, or metal. Pettit recommends using a compatible primer to ensure proper adhesion and durability.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs Pettit EZ Poxy suitable for fiberglass, wood, or metal surfaces?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, Pettit EZ Poxy is designed for fiberglass, wood, and properly primed metal surfaces. Its versatile formula ensures excellent adhesion and a durable finish on all compatible substrates.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan this paint be applied over existing paint, or must it be removed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePettit EZ Poxy can be applied over existing paint, provided the surface is clean, sanded, and free of loose or peeling material. For the best results, ensure compatibility with the existing paint type.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Light Blue \/ Quart","offer_id":43098115801222,"sku":"PET-3210Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Black \/ Aerosol","offer_id":43098115833990,"sku":"PET-3801A","price":22.15,"currency_code":"USD","in_stock":false},{"title":"Blue Glo-White \/ Quart","offer_id":43098115866758,"sku":"PET-3176Q","price":55.26,"currency_code":"USD","in_stock":false},{"title":"Bristol Beige \/ Quart","offer_id":43098115899526,"sku":"PET-3522Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Dark Blue \/ Quart","offer_id":43098115932294,"sku":"PET-3290Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Flag Blue \/ Quart","offer_id":43098115965062,"sku":"PET-3239Q","price":60.72,"currency_code":"USD","in_stock":true},{"title":"Kingston Gray \/ Quart","offer_id":43098115997830,"sku":"PET-3716Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Largo Blue \/ Quart","offer_id":43098116030598,"sku":"PET-3247Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Matterhorn White \/ Quart","offer_id":43098116063366,"sku":"PET-3111Q","price":55.26,"currency_code":"USD","in_stock":true},{"title":"Medium Blue \/ Quart","offer_id":43098116096134,"sku":"PET-3230Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Off White \/ Quart","offer_id":43098116128902,"sku":"PET-3107Q","price":55.26,"currency_code":"USD","in_stock":true},{"title":"Off-White \/ Aerosol","offer_id":43098116161670,"sku":"PET-3108A","price":22.15,"currency_code":"USD","in_stock":true},{"title":"Platinum \/ Aerosol","offer_id":43098116194438,"sku":"PET-3711A","price":22.15,"currency_code":"USD","in_stock":true},{"title":"Sapphire Blue \/ Aerosol","offer_id":43098116227206,"sku":"PET-3237A","price":22.15,"currency_code":"USD","in_stock":true},{"title":"Sea Green \/ Quart","offer_id":43098116259974,"sku":"PET-3352Q","price":56.62,"currency_code":"USD","in_stock":true},{"title":"Sundown Buff \/ Quart","offer_id":43098116292742,"sku":"PET-3523Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"White \/ Aerosol","offer_id":43098116325510,"sku":"PET-3175A","price":22.15,"currency_code":"USD","in_stock":false},{"title":"Yellow \/ Quart","offer_id":43098116358278,"sku":"PET-3457Q","price":57.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Easypoxy_High_Gloss_Topside_Marine_Paint__63706_7148dbd9-9353-45ba-b06d-251371c7dd03.jpg?v=1770420706"},{"product_id":"ez-bilge","title":"Pettit EZ Bilge Performance Bilge Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ Bilge Performance Bilge Paint\u003c\/h2\u003e\n\u003cp\u003ePettit's EZ Bilge is a durable high-performance alkyd finish specially formulated to withstand the abuses associated with boat bilges. The hardwearing finish is resistant to antifreeze, grease, gasoline, diesel fuel, and engine oil. Its tough resilient surface will stand up to years of abrasion and wear. EZ-Bilge utilizes a high-solids formula that is easy to apply by brush, roller or spray and provides excellent coverage. Like other Pettit \"EZ\" products, EZ-Bilge provides the simplest way to achieve optimum results with minimum effort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance coating specially designed for boat bilges\u003c\/li\u003e\n\u003cli\u003eSuper tough finish is fuel, oil, and abrasion resistant\u003c\/li\u003e\n\u003cli\u003eHigh covering formula is easy to apply\u003c\/li\u003e\n\u003cli\u003eSuperior protection that withstands tough bilge conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Oil modified alkyd\u003c\/li\u003e\n\u003cli\u003eFinish: High-gloss\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: Bilges\u003c\/li\u003e\n\u003cli\u003eColors Available: 3124 White, 3125 Gray\u003c\/li\u003e\n\u003cli\u003eCoverage: 545 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: 2 minimum\u003c\/li\u003e\n\u003cli\u003eVOC: 388 grams\/liter (max)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePettit Brush Thinner -For brushing and clean up \u003c\/li\u003e\n\u003cli\u003ePettit Spray Thinner -Spraying Application\u003c\/li\u003e\n\u003cli\u003ePettit Bio-Blue - Surface cleaning for bare fiberglass and painted surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit EZ Bilge Paint\u003c\/h2\u003e\n\u003cp\u003ePettit EZ Bilge is a hard-wearing finish that can be applied to properly prepared fiberglass, metal, wood, and over existing metals. The surface must be free of dirt, loose paint, rust, oil, grease, wax, soap, and any other foreign matter. Stir thoroughly before use. EZ Bilge may be applied by brush, roller, conventional or airless spray. For brush or roller application apply without thinning although in hot weather 5 to 10% Pettit #120 Brushing Thinner may be added to maintain a wet edge. For best results on large, smooth surfaces roll out using a short nap roller followed immediately by leveling off with the tip of a brush. For conventional spray application thin 15 to 20% with Pettit 121 Spraying Thinner.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, Roller, or Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.5 mils (3 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 545 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e120 Brushing Thinner or 121 Spraying Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  1-1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  3 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003ctd\u003e  24 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePainted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean painted areas by washing with a solution of two cups household ammonia per gallon of water. Rinse well.\u003c\/li\u003e\n\u003cli\u003eIf the old paint is an oil-based enamel or polyurethane, and is in good condition, sand with 150 grit sand paper.\u003c\/li\u003e\n\u003cli\u003eSolvent clean then apply first coat of EZ Bilge.\u003c\/li\u003e\n\u003cli\u003eIf the old oil-based or polyurethane paint contained a non-skid material, scrub the non-skid surface with Pettit 92 Bio-Blue using a stuff bristle brush.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly and allow surface to dry. Then apply two coats of EZ Bilge.\u003c\/li\u003e\n\u003cli\u003eIf the old paint is latex or water-based, or is in poor condition, remove it with a paint or varnish remover or by sanding.\u003c\/li\u003e\n\u003cli\u003eProceed with the instructions for the appropriate bare surface system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface smooth with 80-120 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eSolvent clean with Pettit 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply coat of 2018 EZ Wood Sealer.\u003c\/li\u003e\n\u003cli\u003eFollow with one or two coats of 6149 EZ Prime until an evenly smooth base condition is reached.\u003c\/li\u003e\n\u003cli\u003eSand each coat with 80-120 grit sandpaper and solvent clean with Pettit 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eProceed with the first coat of EZ Bilge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Steel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSurface must be cleaned to a bright finish.\u003c\/li\u003e\n\u003cli\u003eImmediately apply one coat of 6980 Rustlok Primer. Allow to dry until tacky.\u003c\/li\u003e\n\u003cli\u003eIf surface is rough, apply a coat of 6627 Tie-Coat Primer. Sand well and solvent clean.\u003c\/li\u003e\n\u003cli\u003eRepeat application of Tie-Coat Primer as needed until a smooth base is achieved.\u003c\/li\u003e\n\u003cli\u003eProceed with the first coat of EZ Bilge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Aluminum\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the prep surface using Pettit 92 Bio-Blue Hull Prep and a Scotch-Brite pad.\u003c\/li\u003e\n\u003cli\u003eThoroughly rinse surface and allow to dry.\u003c\/li\u003e\n\u003cli\u003eRemove oxidation and etch the surface with medium grit emery cloth. Remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply one thin \"wet\" coat of 6980 Rustlok. Allow to dry tacky.\u003c\/li\u003e\n\u003cli\u003eProceed with one or two coats of 6149 EZ Prime to smooth the surface.\u003c\/li\u003e\n\u003cli\u003eSand well and solvent clean with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eProceed with first coat of EZ Bilge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThe entire surface to be painted, regardless of age, must be thoroughly washed with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eSand the gel coat with 80 - 120 grit sandpaper to a dull, frosty appearance. Solvent clean to remove residue.\u003c\/li\u003e\n\u003cli\u003eIf the surface is in excellent condition, proceed with the first coat of EZ Bilge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one, thin even coat per day. After an overnight dry, lightly sand with 220 grit sandpaper and apply a second coat.\u003c\/li\u003e\n\u003cli\u003eAlways wipe with a tack cloth immediately before the fresh application of paint to remove any airborne dust.\u003c\/li\u003e\n\u003cli\u003eFor airless spray application thin up to 5% with Pettit 121 Spraying Thinner.\u003c\/li\u003e\n\u003cli\u003eDo not apply EZ Bilge on extremely humid days (90°+ RH) or when rain is threatening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-EZ-Bilge-Application-Sheet.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit-EZ-Bilge-Application-Sheet.pdf?v=1771379531\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eClick to Download Pettit EZ Bilge Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Gray \/ Qt","offer_id":43098117505158,"sku":"PET-3125Q","price":45.7,"currency_code":"USD","in_stock":true},{"title":"White \/ Qt","offer_id":43098117537926,"sku":"PET-3124Q","price":45.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_EZ_Bilge_photo__25807.jpg?v=1771379699"},{"product_id":"ez-cabin-coat","title":"Pettit EZ Cabin Coat - Quart","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003cp\u003e\u003cstrong\u003ePettit EZ Cabin Coat - Quart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePettit's EZ Cabin-Coat is a high performance, water-based paint specially formulated for areas that are prone to moisture. Its durable finish easily withstands the humid, challenging conditions that promote unsightly mildew growth and cause paint failures in cabin interiors.\u003c\/p\u003e\n\u003cp\u003eEZ Cabin-Coat provides a moisture resistant, mildew proof finish that will stay good-looking, bright and color-fast for years. Ideal for high humidity areas such as cabin interiors, heads, lockers, cabinets, drawers and closets, it can be used on all interior surfaces, such as drywall, wood, fiberglass, wood coverings and even tile.\u003c\/p\u003e\n\u003cp\u003eEZ Cabin-Coat provides excellent adhesion to most glossy surfaces without the need for sanding. Like other Pettit \"EZ\" products EZ Cabin-Coat provides the simplest way to achieve optimum results with minimum effort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance coating for surfaces prone to moisture\u003c\/li\u003e\n\u003cli\u003eSuper tough mold and mildew-proof finish\u003c\/li\u003e\n\u003cli\u003eAdheres to any glossy surface without prior sanding\u003c\/li\u003e\n\u003cli\u003eEasy to apply, dries fast with low odor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSatin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e110 sq. ft\/qt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ***\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_EZ_Cabin_Coat.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/How_to_Apply_Pettit_EZ_Cabin_Coat.pdf?v=1771379179\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eHow to Apply\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"White \/ Qt","offer_id":43098110984326,"sku":"PET-3121Q","price":40.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_EZ_Cabin_Coat_photo__20903.jpg?v=1771379228"},{"product_id":"ez-decks","title":"Pettit EZ Decks Non Skid Deck Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ Decks Non Skid Deck Paint\u003c\/h2\u003e\n\u003cp\u003eThe state-of-the-art Pettit EZ Decks non-skid deck paint adds a powerful finish that the weather simply can’t penetrate. It stays durable for years and is very simple to apply. Part of its secret lies within its special grit that produces a durable, slip-resistant finish applicable to all decks and cabin soles. As with other select Pettit “EZ” products, Pettit EZ Decks allows for a seamless way to achieve maximum results with little-to-no effort.\u003c\/p\u003e\n\u003cp\u003eThe durable weather-resistant finish helps to prevent long term abrasions and abuse. Comes loaded with ultraviolet filters to combat fading while offering premium color retention that will stay vibrant for years without cracking like lesser deck finishes. Available in three popular colors that match perfectly with Pettit’s Easypoxy topside enamel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides a super tough non-skid finish\u003c\/li\u003e\n\u003cli\u003eExtremely durable weather-resistant finish\u003c\/li\u003e\n\u003cli\u003eFade and UV resistant, colors hold up under tough conditions\u003c\/li\u003e\n\u003cli\u003eEZ decks is simple to use and easy to apply\u003c\/li\u003e\n\u003cli\u003eSold in Quarts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit Brush Thinner \u003c\/strong\u003e- For brushing and clean up \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit Spray Thinner \u003c\/strong\u003e-For spraying application \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit Bio-Blue\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e- \u003c\/strong\u003eFor preparing bare fiberglass surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2 Minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow To Apply Pettit EZ Decks Non-Skid Paint\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003eStir EZ Decks thoroughly before use, as the non-skid agent in the paint will float to the surface in the container. This paint can be applied by brush or roller; if applying by brush or roller, apply without thinning. If applying in hot weather, 5-10% of Pettit 120 Thinner may be added to maintain a wet edge. For best results on large surfaces, roll out using a short nap or foam roller followed immediately by leveling off with the tip of a brush.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush or roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eNumber of Coats:\u003c\/strong\u003e 2 minimum\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDry Film Thickness per Coat: \u003c\/strong\u003e1.5 mils (2.6 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e120 Brushing Thinner (clean up also)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90°F\u003c\/td\u003e\n\u003ctd\u003e1-1\/2 Hours\u003c\/td\u003e\n\u003ctd\u003e8 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70°F\u003c\/td\u003e\n\u003ctd\u003e3 Hours\u003c\/td\u003e\n\u003ctd\u003e16 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e6 Hours\u003c\/td\u003e\n\u003ctd\u003e24 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface smooth with 80-120 grit sandpaper, then solvent clean with Pettit 120 Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eFill all screw heads or small holes with an epoxy fairing compound; sand flush and solvent clean.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 2018 Clear Sealer to penetrate and seal the porous grain.\u003c\/li\u003e\n\u003cli\u003eFollow with one or  two coats of 6149 Easypoxy White Undercoater until an evenly smooth base condition is reached.\u003c\/li\u003e\n\u003cli\u003eSand each coat with 80-120 grit sandpaper and solvent clean with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eProceed with the first finish coat of EZ Decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Steel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSurface must be cleaned to a bright finish by sandblasting or grinding. Remove blast residue.\u003c\/li\u003e\n\u003cli\u003eImmediately apply one coat of 6980 Rustlok Primer. Allow to dry until tacky.\u003c\/li\u003e\n\u003cli\u003eIf surface is rough, apply a coat of 6627 Tie-Coat Primer. Sand well and solvent clean.\u003c\/li\u003e\n\u003cli\u003eRepeat application as needed until a smooth, uniform base is reached.\u003c\/li\u003e\n\u003cli\u003eProceed with the first coat of EZ Decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Aluminum\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWipe the surface free of oil and grease with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eRemove oxidation and etch the surface with medium grit emery cloth. Remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply one thin \"wet\" coat of 6455\/044 Metal Primer. Allow to dry at least two hours.\u003c\/li\u003e\n\u003cli\u003eProceed with the first coat of EZ Decks.\u003c\/li\u003e\n\u003cli\u003e6149 Easypoxy White Undercoater can be used over the 6455\/044 Metal Primer for smoothing surfaces if desired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThe entire surface being painted must be thoroughly washed with 120 Thinner or 92 Bio-Blue.\u003c\/li\u003e\n\u003cli\u003eSand the gel coat with 80 to 120 grit sandpaper to a dull, frosty appearance. Solvent clean to remove residue.\u003c\/li\u003e\n\u003cli\u003eIf the surface is in excellent condition, proceed with the first finish coat of EZ Decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePainted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean painted areas by washing with a solution of two cups household ammonia per gallon of water and rinse well.\u003c\/li\u003e\n\u003cli\u003eRemove existing mildew with household bleach instead of ammonia.\u003c\/li\u003e\n\u003cli\u003eIf the oil paint is oil-based enamel or polyurethane, and is in good condition, sand it smooth with 150 grit sandpaper. \u003c\/li\u003e\n\u003cli\u003eSolvent clean to remove residue, then proceed with first coat of EZ Decks.\u003c\/li\u003e\n\u003cli\u003eIf the old paint contained a non-skid material, scrub the non-skid service with Pettit #92 Bio-Blue using a stiff bristle brush.\u003c\/li\u003e\n\u003cli\u003eThoroughly rinse the surface and allow to dry.\u003c\/li\u003e\n\u003cli\u003eApply two coats of EZ Decks.\u003c\/li\u003e\n\u003cli\u003eIf old paint is latex or water-based, or is in poor condition, remove it with a paint and varnish remover or by sanding.\u003c\/li\u003e\n\u003cli\u003eProceed with instructions for the appropriate bare surface system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_EZ_Decks_Non-Skid.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/How_to_Apply_Pettit_EZ_Decks_Non-Skid.pdf?v=1771374487\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eClick to Download Pettit EZ Decks Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"White \/ Qt","offer_id":43098111180934,"sku":"PET-3127Q","price":57.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_EZ_Decks_Non_Skid_photo__51022.jpg?v=1771374552"},{"product_id":"ez-poxy-1","title":"Pettit EZ Poxy High Gloss Topside Marine Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ Poxy High Gloss Topside Marine Paint\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003ePettit Easypoxy delivers professional-grade protection for above-waterline boat surfaces with its advanced polyurethane formula. This high-gloss topside paint resists fading, chalking, and UV damage while standing up to saltwater, weather exposure, and general wear. The self-leveling formula applies smoothly by brush, roller, or spray, covering up to 600 square feet per gallon. Available in 34 colors with quart and gallon sizes, it works on properly prepared fiberglass, wood, and metal surfaces. Apply at least two coats between 50°F and 90°F for optimal results and long-lasting durability in harsh marine conditions.\u003c\/p\u003e\n\u003cp\u003eNOTE: Ground-shipped within the Continental U.S. only.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eFeatures\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHigh-Gloss Finish: This high-gloss marine paint creates a stunning finish that resists fading and chalking, providing a durable and sleek aesthetic. Its UV-resistant properties prevent fading even with constant sunlight exposure.\u003c\/li\u003e\n\u003cli\u003eDurable and Weather-Resistant Formula: Pettit topside paint is formulated to withstand the harsh marine environment. Its durability protects against abrasion, scratches, and wear caused by exposure to saltwater, wind, and weather.\u003c\/li\u003e\n\u003cli\u003eEasy Application: Both experienced boaters and beginners can apply Pettit EZ Poxy to achieve a professional finish. Use a brush, roller, or sprayer, and let its self-leveling properties and user-friendly formula achieve stunning results. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eFinish: High-gloss\u003c\/li\u003e\n\u003cli\u003eCoverage: Up to 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: At least two coats minimum\u003c\/li\u003e\n\u003cli\u003eColors: 34 colors available; refer to our Pettit paint color chart\u003c\/li\u003e\n\u003cli\u003ePack Size: Available in one quart for all colors and one gallon for White, Hatteras Off-White and Semi-Gloss White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eAssociated Products\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eTo get the best results, pair your Pettit EZ Poxy with these products:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit 120 Thinner:\u003c\/strong\u003e Use for brushing, rolling, and clean-up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit 121 Thinner: \u003c\/strong\u003eUse for spraying\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit Satin Additive:\u003c\/strong\u003e Achieve a semi-gloss to semi-flat finish that reduces glare on deck surfaces and interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit EZ-Prime: \u003c\/strong\u003eBefore applying Pettit topside paint, apply a primer as a base coat, particularly on surfaces that are aged, cracked, checked, pitted, rough, or not fully smooth, to ensure optimal adhesion and a flawless finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eHow To Apply Pettit Easypoxy Topside Paint\u003c\/span\u003e\u003c\/h2\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003ePettit EZ Poxy is best applied in temperatures between 50°F and 90°F, with low humidity and no rain. Avoid painting in direct sunlight or extreme heat, which may affect drying and leveling.\u003c\/li\u003e\n\u003cli\u003ePrepare your surface for paint application. Refer to our “Non-Fiberglass Surface Preparation” guide below.\u003c\/li\u003e\n\u003cli\u003eStir the paint thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eApply a thin, even coat with a brush, roller, or spray, and let it dry overnight.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightly sand with 220 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply a second coat and let it cure for 8 to 24 hours, depending on your area’s temperatures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eApplication Notes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eDry Film Thickness per Coat: 1.5 mils (3 wet mils)\u003c\/li\u003e\n\u003cli\u003eCoverage: 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eApplication Temp: 50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003eAvoid applying multiple coats in a single day. Applying excessively thick layers over 4 wet mils can prevent proper drying and produce a soft, under-cured paint film.\u003c\/li\u003e\n\u003cli\u003eAvoid painting on extremely humid days (90°+ RH) or when it’s raining.\u003c\/li\u003e\n\u003cli\u003eAvoid painting outdoors in the late afternoon, as dew can negatively impact the wet paint film and compromise the finish.\u003c\/li\u003e\n\u003cli\u003eIn cooler temperatures, ensure that the air and surface temperatures stay at or above 50°F for at least 8 hours after application to allow proper curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eAlthough thinning Pettit EZ Poxy paint is not recommended for brush or roller applications, up to 10% of Pettit 120 Brushing Thinner can be added in hot weather to help maintain a wet edge. For optimal results on large, smooth surfaces, use a short roller and level it with the tip of a brush.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor traditional spray applications, thin Pettit EZ-Poxy using 15 to 20% of Pettit 121 Spraying Thinner. For airless sprays, use up to 5% and a tip size between 0.11 and 0.15 inches in diameter for proper application.\u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTemp\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTo Recoat\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTo Launch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e90°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e8 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e70°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e3 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e16 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e50°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e24 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg title=\"pdficon.png\" src=\"https:\/\/lh7-rt.googleusercontent.com\/docsz\/AD_4nXeyVZe_KJUnlG8e_hrIl-1vhFzcNbVkdtesWj6kqFL0KfjQAZJd-F5KGE-02WP64rnzTlp1WjCdGnYHyd0brmhyGAsIscVpw_7IwcHv0XGX0bMbLRO82Gp6evD0UUCOkiGk4gcp?key=cdmlQ1YmmSmNKf5bym2fAF1R\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit-EZ-Poxy-Topside-Paint-Application-Information.pdf?v=1771373960\" target=\"_blank\" rel=\"noopener\"\u003eClick to Download Pettit Easypoxy Application Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eFiberglass Application \u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg src=\"https:\/\/lh7-rt.googleusercontent.com\/docsz\/AD_4nXdfWmKCs_lfvFgYegq63sKG4HOXtr47TgqGeGqbcEJFe8QKe08zfwdoFl2jBWnq5Zn8OidbqvSWQ7wYI2quSnofclQnUwki3sGs2yyClT1HhhOQwsv-fByqrbabL01i2Ql_AYAM?key=cdmlQ1YmmSmNKf5bym2fAF1R\" alt=\"\" width=\"579\" height=\"251\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eNon-Fiberglass Application \u003c\/h3\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eBare Wood\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eSand bare wood with 80 to 120 grit sandpaper until smooth. If the wood has been epoxied, scrub thoroughly with an ammonia\/water solution, sand with 120 grit, and clean with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eUse 7050 EZ-Fair Epoxy Fairing Compound to fill screw heads or small holes. Sand the filled areas flush and clean with the same thinner.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 2018 EZ WoodSealer to seal the porous grain. For epoxied wood, skip the sealer and move directly to priming.\u003c\/li\u003e\n\u003cli\u003eApply one or two coats of 6149 EZ Prime, sanding each coat with 80-120 grit sandpaper and cleaning with Pettit 120 Thinner between coats until a smooth base is achieved.\u003c\/li\u003e\n\u003cli\u003eOnce the primed surface is clean and smooth, proceed with the first coat of Pettit Easypoxy for a durable, high-gloss finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSteel Hulls\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eClean the surface to a bright finish by sandblasting or grinding, then remove any blast residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 6980 Rustlok Primer and let it dry until tacky. For rough surfaces, apply a coat of 6627 Tie-Coat Primer. Sand before cleaning with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eRepeat as needed until smooth, then apply the first coat of Pettit EZ Poxy.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eAluminum\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eRemove oil and grease using Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eUse a medium-grit emery cloth to remove oxidation, etch the surface, and then clean off any sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a thin coat of 6455\/044 Metal Primer and let it dry for at least two hours. Optionally, use 6149 EZ Prime for additional smoothing before applying the first coat\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this paint require a primer before application?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, Pettit EZ Poxy requires a primer when applied to bare surfaces such as fiberglass, wood, or metal. Pettit recommends using a compatible primer to ensure proper adhesion and durability.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs Pettit EZ Poxy suitable for fiberglass, wood, or metal surfaces?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, Pettit EZ Poxy is designed for fiberglass, wood, and properly primed metal surfaces. Its versatile formula ensures excellent adhesion and a durable finish on all compatible substrates.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan this paint be applied over existing paint, or must it be removed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePettit EZ Poxy can be applied over existing paint, provided the surface is clean, sanded, and free of loose or peeling material. For the best results, ensure compatibility with the existing paint type.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Bikini Blue \/ Qt","offer_id":43098111967366,"sku":"PET-3229Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Black \/ Qt","offer_id":43098112000134,"sku":"PET-3801Q","price":57.31,"currency_code":"USD","in_stock":true},{"title":"Blue Ice \/ Qt","offer_id":43098112032902,"sku":"PET-3213Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Bright Red \/ Qt","offer_id":43098112065670,"sku":"PET-3624Q","price":67.55,"currency_code":"USD","in_stock":true},{"title":"Burgundy \/ Qt","offer_id":43098112098438,"sku":"PET-3626Q","price":67.55,"currency_code":"USD","in_stock":true},{"title":"Dull Dead Grass \/ Qt","offer_id":43098112131206,"sku":"PET-3303Q","price":39.35,"currency_code":"USD","in_stock":true},{"title":"Electric Blue \/ Qt","offer_id":43098112163974,"sku":"PET-3237Q","price":60.72,"currency_code":"USD","in_stock":false},{"title":"Fight Lady Yellow \/ Qt","offer_id":43098112196742,"sku":"PET-3456Q","price":57.98,"currency_code":"USD","in_stock":true},{"title":"Grand Bank Beige \/ Qt","offer_id":43098112229510,"sku":"PET-3520Q","price":57.98,"currency_code":"USD","in_stock":true},{"title":"Hatteras Cream \/ Qt","offer_id":43098112262278,"sku":"PET-3208Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Hatteras White \/ Qt","offer_id":43098112295046,"sku":"PET-3108Q","price":57.98,"currency_code":"USD","in_stock":true},{"title":"Hatteras White \/ Gal","offer_id":43098112327814,"sku":"PET-3108G","price":163.84,"currency_code":"USD","in_stock":true},{"title":"Jade Green \/ Qt","offer_id":43098112360582,"sku":"PET-3348Q","price":56.62,"currency_code":"USD","in_stock":true},{"title":"Kelly Green \/ Qt","offer_id":43098112393350,"sku":"PET-3350Q","price":57.98,"currency_code":"USD","in_stock":false},{"title":"Ocean Blue \/ Qt","offer_id":43098112426118,"sku":"PET-3248Q","price":59.35,"currency_code":"USD","in_stock":true},{"title":"Platinum \/ Qt","offer_id":43098112458886,"sku":"PET-3711Q","price":62.09,"currency_code":"USD","in_stock":true},{"title":"Sandtone \/ Qt","offer_id":43098112491654,"sku":"PET-3518Q","price":57.98,"currency_code":"USD","in_stock":false},{"title":"Seafoam Green \/ Qt","offer_id":43098112524422,"sku":"PET-3333Q","price":55.26,"currency_code":"USD","in_stock":true},{"title":"Seattle Gray \/ Qt","offer_id":43098112557190,"sku":"PET-3715Q","price":57.98,"currency_code":"USD","in_stock":true},{"title":"Steel Gray \/ Qt","offer_id":43098112589958,"sku":"PET-3720Q","price":55.94,"currency_code":"USD","in_stock":false},{"title":"White \/ Qt","offer_id":43098112622726,"sku":"PET-3175Q","price":57.98,"currency_code":"USD","in_stock":false},{"title":"White \/ Gal","offer_id":43098112655494,"sku":"PET-3175G","price":153.6,"currency_code":"USD","in_stock":false},{"title":"Semi-Gloss White \/ Gal","offer_id":43124442857606,"sku":"PET-3106G","price":154.97,"currency_code":"USD","in_stock":false},{"title":"Semi-Gloss White \/ Qt","offer_id":43124442890374,"sku":"PET-3106Q","price":55.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Easypoxy_High_Gloss_Topside_Marine_Paint__63706_6585d403-31c8-4fbf-9d1f-d3fce43021ba.jpg?v=1771373717"},{"product_id":"flattening-agent-1-part-finishes","title":"Interlux Flattening Agent for 1 Part Finishes","description":"\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eInterlux Flattening Agent for 1 Part Finishes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA Flattening Agent specially formulated for mixing with Interlux one-part finishes (Brightside Polurethane and Yacht Enamels) and varnishes (Schooner Gold, Original, Goldspar and Schooner) to produce a variety of gloss, satin or matte effect finishes. For interior and exterior use.\u003c\/p\u003e\n\u003cp\u003eThe addition of Flattening Agent to a finish or varnish will not affect the drying or overcoating characteristics of the product. It will not affect the durability of the finished surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAdd Flattening Agent to final coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInterlux Special Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf required, thin 5% with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eInterlux Special Thinner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParts Finish or Varnish\u003c\/td\u003e\n\u003ctd\u003e Parts Flattening Agent\u003c\/td\u003e\n\u003ctd\u003e Gloss Range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 \u003c\/td\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003ctd\u003e High Semi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003ctd\u003eSemi-Gloss \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003ctd\u003e2 \u003c\/td\u003e\n\u003ctd\u003e Low Semi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003ctd\u003e3 \u003c\/td\u003e\n\u003ctd\u003e Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"tab_label classyunicodedone\"\u003eHow To Apply\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION DATA METHOD\u003c\/strong\u003e: Brush, Conventional Spray, Roller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eVariable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThin 5% with Special Thinner 216 if required. The addition of Flattening Agent YMA715 to a finish or varnish will not affect the drying or overcoating characteristics of the product. It will not affect the durability of the finished surface. As with all the types of reducedgloss coatings, the resulting finish will not have the same stay-clean properties as a full-gloss coating. If all the mixed (matted) material is not used it may be used at a later date. Simply stir well before use. The level of gloss will decrease where the amount of Flattening Agent YMA715 is increased. The opacity (ability to hide) of the chosen finish will be affected once the clear Flattening Agent YMA715 is added. For better hide apply the unflattened finish first and finish off with the mixed (flattened) material as a last coat, or apply the unflattened finish until opacity is achieved. Stir well before use. If all of the mixed material is not used it may be saved and used at a later date. Product temperature should be minimum 15°C\/60°F and maximum 30°C\/86°F. Ambient temperature should be minimum 5° C\/41°F and maximum 35°C\/95°F. Substrate temperature should be minimum 5°C\/41°F and maximum 35°C\/95°F.\u003c\/p\u003e\n\u003cp\u003eFollow the surface preparation instructions shown on the label of the finish or varnish to which the Flattening Agent is being added. Mixing Details - Typical Gloss Reduction using Flattening Agent YMA715 Parts Finish or Varnish :\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParts Flattening Agent : Gloss Range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 : 1 : High Semi-Gloss\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 : 1 : Semi-Gloss\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 : 2 : Low Semi-Gloss\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 : 3 : Flat\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOnly suitable for use with 1-part finishes or varnishes.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Flattening_Agent_for_1-Part_Finishes.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Flattening_Agent_for_1-Part_Finishes.pdf\"\u003eHow to Apply\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/YMA715_Flattening_Agent_Part1_MSDS.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"41\" height=\"39\"\u003eMSDS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":43098115408006,"sku":"ILX-YMA715","price":50.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/ilx-yma-715_lg__10797.jpg?v=1770152052"},{"product_id":"high-gloss","title":"Interlux High Gloss Yacht Enamel - White","description":"\u003cp\u003e\u003cstrong\u003eInterlux High Gloss White Yacht Enamel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterlux Yacht Enamel is a fast drying, high quality topside finish. It has excellent adhesion to properly prepared surfaces and superior hiding characteristics. Easy to apply by brush, roller, conventional spray and airless spray. Interlux Yacht Enamel is ideal for use above the true waterline for hullsides, decks, boottops and fasion stripes. Bright, high gloss finish allows the natural beauty of wood to show through.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreat color and gloss retention\u003c\/li\u003e\n\u003cli\u003eTraditional alkyd-based marine enamel\u003c\/li\u003e\n\u003cli\u003eBright, high gloss finish\u003c\/li\u003e\n\u003cli\u003eExcellent flow and leveling properties\u003c\/li\u003e\n\u003cli\u003eSold in quarts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e550 ft²\/gal. by brush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2-3 minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eThinners:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-marine-brushing-thinner-quart.html\"\u003eInterlux Brush Thinner:\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eThinning for brush application \u0026amp; clean-up\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eInterlux Special Thinner:\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eThinning for spray application \u0026amp; clean-up\u003c\/p\u003e\n\u003cp\u003eIt is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"tab_label classyunicodedone\"\u003eHow To Apply\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION METHOD\u003c\/strong\u003e: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2-3 minimum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDRY FILM THICKNESS PER COAT: \u003c\/strong\u003e2 mils (3.6 wet mils)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e550 sq. ft\/gal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION TEMP:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 95°F Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHINNER:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush - Brushing Liquid 333. Spray - Special Thinner 216.\u003c\/p\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Touch\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIn Good Condition Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water and allow to dry. Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned. Sand with 180 grade (grit) paper. Remove sanding residue. In Poor Condition Clean as above. Sand with 80 grade (grit) paper. Apply White Undercoater 279.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE WOOD:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSand surface, wipe clean. Apply White Undercoater 279. Sand surface, wipe clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEL HULLS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSandblast or grind, remove sanding residue. Immediately apply a self-etching primer. Allow to dry for 1-24 hours. Apply one coat of Epoxy Barrier-Kote 404\/414.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eApply 2-3 coats of Yacht Enamel* following the proper dry times. Sand between coats using 220-320 grade (grit) paper. Remove sanding residue with a rag dampened with Brushing Liquid 333. Yacht Enamel* may be applied by roller and brush using the roll and tip method. It is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss. Airless Spray Pressure: 170 bar\/2500 psi. Tip Size: 0.33-0.41 mm\/13-16 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 8-10 psi (pot pressure). Tip Size: 0.89-1.4 mm\/35-50 thou. Siphon Cup: Pressure: 3.44-4.47 bar\/50-65 psi - gun pressure. Tip Size: 1.5-1.8 mm\/60-70 thou.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Premium_Yacht_Enamel.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Premium_Yacht_Enamel.pdf\"\u003eHow to Apply\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"White \/ Gal","offer_id":43098116489350,"sku":"ILX-1Q","price":38.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/premium-yacht-enamel__97800.jpg?v=1770151970"},{"product_id":"rubberized-deck-coating","title":"Tuff Coat Rubberized Non-Skid Deck Coating","description":"\u003ch2 class=\"classyunicodedone\"\u003eTuff Coat Rubberized Non-Skid Marine Non Submersible Deck Coating - Gallon\u003c\/h2\u003e\n\u003cp\u003eTuff Coat Rubberized Non-Skid Deck Coating provides durable protection for boats, docks, and ramps using recycled rubber crumb aggregate in a polyurethane formula. This VOC-free coating covers 40-45 square feet per gallon and can be applied by spray, brush, or roller. It creates a waterproof, non-slip surface that resists UV rays, chemicals, acids, solvents, and impacts while reducing noise on aluminum boats. Available in 17 colors including whites, grays, blues, and safety yellow, it dries to a matte finish that's easy to clean. Requires Tuff Coat Primer for proper adhesion and works best between 40°F and 120°F.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage - 1 Gallon of Tuff Coat covers approximately 40-45 square feet\u003c\/li\u003e\n\u003cli\u003eSurfaces covered with Tuff Coat Rubberized Deck Coating must be primed with Tuff Coat Primer (See note below)\u003c\/li\u003e\n\u003cli\u003eHelps to prevent slipping and injury\u003c\/li\u003e\n\u003cli\u003eDeadens and absorbs noise\u003c\/li\u003e\n\u003cli\u003eNOTE: due to the nature of the rubberized ‘crumbs’, the paint texture may vary when applied\u003c\/li\u003e\n\u003cli\u003eNon-toxic and environmentally friendly(no VOC's)\u003c\/li\u003e\n\u003cli\u003eConsists of recycled rubber crumb aggregate-non abrasive\u003c\/li\u003e\n\u003cli\u003eUV resistant pigments \u0026amp; stabilizers enhance protection\u003c\/li\u003e\n\u003cli\u003eTuff Coat Rubberized Deck Coating protects surfaces and decks against chemicals such as acids, solvents, fuels, chlorine, salts, etc.\u003c\/li\u003e\n\u003cli\u003eResists impact\u003c\/li\u003e\n\u003cli\u003eWaterproofs wood decking\u003c\/li\u003e\n\u003cli\u003eCan be sprayed, brushed, or roller applied, easy for the beginner\u003c\/li\u003e\n\u003cli\u003eDries to a quick, easy to clean finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eColors Available \u003c\/p\u003e\n\u003cp\u003eUT-112 Medium Blue, UT-110 Light Blue, UT-118 Waterpark Blue, UT-119 White, UT-109 Keywest Sand, UT-116 Sand, UT-117 Tan, UT-105 Dark Brown, UT-114 Olive, UT-108 Green, UT-107 Dark Green, UT-115 Red, UT-102 Brick Red, UT-111 Light Grey, UT-106 Dark Grey, UT-101 Black, UT-221 Safety Yellow\u003c\/p\u003e\n\u003ctable border=\"0\" cellspacing=\"15\" cellpadding=\"15\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features Eco-Friendly\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-earth.png\" alt=\"Tuff Coat Features Eco-Friendly\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features Recycled Rubber\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-recycle.png\" alt=\"Tuff Coat Features Recycled Rubber\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features UV Resistant\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-step.png\" alt=\"Tuff Coat Features UV Resistant\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features No Mixing\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-one.png\" alt=\"Tuff Coat Features No Mixing\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features DIY Application\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-roller.png\" alt=\"Tuff Coat Features DIY Application\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWater-Based \u0026amp; Eco Friendly\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eRecycled High-Grip Rubber Granules\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUV \u0026amp; Chemical Resistant\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSingle Component - No Mixing\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSimple Do-it-Yourself Application\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemp: 40°F min. - 120°F max. (air, surface, \u0026amp; material)\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 85% maximum\u003c\/li\u003e\n\u003cli\u003eMethod:\u003c\/li\u003e\n\u003cli\u003eRoll – TUFF-Coat® Rollers\u003c\/li\u003e\n\u003cli\u003eSpray – Superior Hopper Gun or Texture Sprayer\u003c\/li\u003e\n\u003cli\u003eFinish: Matte finish\u003c\/li\u003e\n\u003cli\u003eAppearance: Textured colored liquid\u003c\/li\u003e\n\u003cli\u003eRecommended Spread Rate:\u003c\/li\u003e\n\u003cli\u003eWet mils: 50-60\u003c\/li\u003e\n\u003cli\u003eDry mils: 35-40\u003c\/li\u003e\n\u003cli\u003eCoverage: 40-45 Sq. Ft. in 2 coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDrying Schedule\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(20 mils wet @50% RH, 72ºF)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo touch: Approx. 1 hour\u003c\/li\u003e\n\u003cli\u003eTo top coat: Approx. 1-2 hours\u003c\/li\u003e\n\u003cli\u003eTo cure: Approx. 24hrs-5 days for a full chemical cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRoller, Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e40°F or higher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 – Light Traffic | 3 – Heavy Traffic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Tuff Coat Rubberized Deck Coating\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Application Steps\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/application-graphi.jpg\" alt=\"Tuff Coat Application Steps\" width=\"600\" height=\"181\"\u003e\u003c\/p\u003e\n\u003cp\u003ePrior to applying Tuff Coat, stir thoroughly before applying and stir periodically to maintain aggregate in suspension. Dilute the product with clean water\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eonly\u003c\/strong\u003e. A dilution of 10% will reduce the solids within the product by the same amount. Avoid “cracking”: Do not allow Tuff Coat Rubberized Deck Coating to pool and do not apply very thick coats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIt is recommended that you perform a test patch to ensure adhesion before applying fully.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConcrete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMust be fully cured.\u003c\/li\u003e\n\u003cli\u003eIf a concrete surface has a porous texture, no further surface preparation is necessary.\u003c\/li\u003e\n\u003cli\u003eIf the concrete surface is not porous, then acid etching, sanding, or shot blasting is necessary. Make sure to use a light acid etch and remove all remaining acid with soap, water, and a scrub brush.\u003c\/li\u003e\n\u003cli\u003eConcrete should be completely clean and dry.\u003c\/li\u003e\n\u003cli\u003ePatch all imperfections, cracks, etc. with concrete patch filler and flexible joint fillers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euse silicone products, as Tuff Coat Rubberized Deck Coating will not adhere to silicone.\u003c\/li\u003e\n\u003cli\u003ePrime with CP-10 as per instructions on the label. Once the primer has properly cured, apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePainted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressively roughen the surface by sanding with 36 or 40 grit sandpaper. The surface must be rough for proper adhesion.\u003c\/li\u003e\n\u003cli\u003eClean the surface of all oils, grease, dirt, silicone, and other contaminants. Leave no residue.\u003c\/li\u003e\n\u003cli\u003eInspect for any imperfections or delamination of previously painted surfaces.\u003c\/li\u003e\n\u003cli\u003ePrime with CP-10 then apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAsphalt\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface by pressure-washing.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is completely dry before applying asphalt primer.\u003c\/li\u003e\n\u003cli\u003eNext, apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel and Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare metal substrates should be appropriately primed after being treated for rust or removal of old paint.\u003c\/li\u003e\n\u003cli\u003eAll smooth metal should be cleaned, and aggressively roughed by sanding with 36 or 40 grit sandpaper or by acid etch. Acid etch is recommended.\u003c\/li\u003e\n\u003cli\u003eClean and dry surface.\u003c\/li\u003e\n\u003cli\u003ePrime with MP-10 then apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRubber\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 36 or 40 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eClean and dry surface.\u003c\/li\u003e\n\u003cli\u003ePrime with rubber primer then apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlywood, Lumber, and Treated Lumber\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew lumber needs no sanding. Old lumber requires sanding with 36 or 40 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove any peeling, cracking, or chipping paint, varnish, or sealer.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is clean and dry before priming with CP-10.\u003c\/li\u003e\n\u003cli\u003eFinish by applying Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo ensure good adhesion, first sand the surface aggressively using 36 or 40 grit paper to ensure the removal of all gloss from the substrate.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is free of waxes and other protective additives.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is clean and dry before priming with CP-10.\u003c\/li\u003e\n\u003cli\u003eThe final step will be to apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse Ultra TUFF Texture Rollers. The roller must be capable of lifting the rubber crumb within the product to the surface.\u003c\/li\u003e\n\u003cli\u003ePour product into the paint tray and be sure to completely saturate the roller.\u003c\/li\u003e\n\u003cli\u003eApply the first coat as a thin coat. Resaturate roller after each pass. Make 4-5 consecutive passes in the same direction, with each pass right next to the other.\u003c\/li\u003e\n\u003cli\u003eWhen applying, roll in one direction first, then roll in the opposite direction.\u003c\/li\u003e\n\u003cli\u003eOnce an area is covered, run the roller very lightly over it to ensure an even distribution of color and the rubber crumb.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpray\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse only the spray gun recommended or supplied by Tuff Coat.\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eSuperior\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ebrand “Spraying-Mantis” handheld Hopper gun, or equivalent.\u003c\/li\u003e\n\u003cli\u003eSpray water to prime.\u003c\/li\u003e\n\u003cli\u003eHolding the gun approximately 12-24 inches away from the surface, spray an even, light coat over the entire surface.\u003c\/li\u003e\n\u003cli\u003eKeep the spray gun at a 90 degree angle to the surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInformation has been sourced from Ultra TUFF and Ultra TUFF Marine Water-Based Non-skid Polyurethane Coatings Application Instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Tuff-Coat Marine","offers":[{"title":"Black \/ Gal","offer_id":43098112688262,"sku":"TUF-UT-101","price":84.28,"currency_code":"USD","in_stock":false},{"title":"Dark Brown \/ Gal","offer_id":43098112721030,"sku":"TUF-UT-105","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Dark Gray \/ Gal","offer_id":43098112753798,"sku":"TUF-UT-106","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Keywest Sand \/ Gal","offer_id":43098112786566,"sku":"TUF-UT-109","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Light Blue \/ Gal","offer_id":43098112819334,"sku":"TUF-UT-110","price":93.07,"currency_code":"USD","in_stock":true},{"title":"Light Gray \/ Gal","offer_id":43098112852102,"sku":"TUF-UT-111","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Olive \/ Gal","offer_id":43098112884870,"sku":"TUF-UT-114","price":84.28,"currency_code":"USD","in_stock":false},{"title":"Sandtone \/ Gal","offer_id":43098112917638,"sku":"TUF-UT-116","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Tan \/ Gal","offer_id":43098112950406,"sku":"TUF-UT-117","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Waterpark Blue \/ Gal","offer_id":43098112983174,"sku":"TUF-UT-118","price":113.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Tuff_Coat__36524.jpg?v=1770149050"},{"product_id":"skidless-compound","title":"Pettit Specialty Skidless Marine Compound","description":"\u003cp\u003e\u003cstrong\u003ePettit Specialty Skidless Marine Compound\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade of fine silicon oxide, Pettit Skidless Compound is added to topside paints to yield a non-skid deck surface. This additive may be mixed into paint or shaken over a wet freshly painted deck surface and allowed to dry. Once coat is dry, blow off excess and top-coat with final coat of topside paint.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Pint","offer_id":43098111213702,"sku":"PET-9900P","price":29.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Specialty_Skidless_Marine_Compound_photo__50820.jpg?v=1771379017"},{"product_id":"toplac-plus","title":"Interlux Toplac Plus Marine Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Toplac Plus Marine Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux Toplac Plus delivers a hard, high-gloss polyurethane finish designed for topside applications above the waterline. This one-part marine paint features superior flow and leveling characteristics that produce smooth roller finishes without tipping. Apply it to hulls, decks, cabins, and trim using brush, roller, or spray methods. With coverage of 587 square feet per gallon, you'll need 2-3 coats for optimal protection. The formula works with single-part primers, enamels, and polyurethanes while offering excellent UV resistance. Available in bright, crisp colors that maintain their appearance in harsh marine environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHard, high gloss, one-part polyurethane finish\u003c\/li\u003e\n\u003cli\u003eExcellent flow and leveling characteristics\u003c\/li\u003e\n\u003cli\u003eSmooth Roller Finish with no Tipping required\u003c\/li\u003e\n\u003cli\u003eTopside paint - Recommended for use above true waterline\u003c\/li\u003e\n\u003cli\u003eFor use with single-part primers, enamels, or polyurethanes\u003c\/li\u003e\n\u003cli\u003eAvailable in a range of bright, crisp colors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller or spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 Minimum (only 1 may be needed for touch-up\/repair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e587 sq. ft\/gal per coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThinner\/Cleaner\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e2333N Reducing Solvent\u003c\/li\u003e\n\u003cli\u003e333 Brushing Thinner\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"\/products\/special-thinner\" target=\"_blank\"\u003e216 Special Thinner\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow To Apply Toplac Plus\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e:  Brush, Roller, Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDry Film Thickness per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1-1.5 mils (2-3 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e587 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e41°F Min. \/ 95°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinning:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAdd 10% 2333N reducing solvent for brushes and 216 Special Thinner for spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e333 Brushing Liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  Touch Dry\u003cbr\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  Overcoating Substrate\u003cbr\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  95°F\u003c\/td\u003e\n\u003ctd\u003e  1 Hour\u003c\/td\u003e\n\u003ctd\u003e  6 Hour Min \/ 24 Hour Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  77°F\u003c\/td\u003e\n\u003ctd\u003e  2 Hours\u003c\/td\u003e\n\u003ctd\u003e  8 Hour Min \/ 2 Day Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  59°F\u003c\/td\u003e\n\u003ctd\u003e  3 Hours\u003c\/td\u003e\n\u003ctd\u003e  16 Hour Min \/ 3 Day Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  41°F\u003c\/td\u003e\n\u003ctd\u003e  6 Hours\u003c\/td\u003e\n\u003ctd\u003e  24 Hour Min \/ 4 Day Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure. Do not use in temperatures below 41° F\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation \u0026amp; Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surface:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIn poor condition remove all previous coatings and prime the substrate, referring to the primer\/undercoat technical datasheet for further preparation instructions.\u003c\/li\u003e\n\u003cli\u003eIn good condition wash down with a suitable detergent, rinse with fresh water and allow to dry\u003c\/li\u003e\n\u003cli\u003eAbrade with 280 - 320 grit paper and remove sanding residue\u003c\/li\u003e\n\u003cli\u003eWipe with Brushing LIquid 333 and allow to dry completely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eAll Substrates:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrime with a suitable primer or primer\/undercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand the undercoat smooth with 120 - 400 grit wet or dry paper\u003c\/li\u003e\n\u003cli\u003eRemove dust with a dust wipe\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of Toplac Plus with 8-16 hours depending on ambient temperature (refer to the table above)\u003c\/li\u003e\n\u003cli\u003eAmbient temperatures should be between 41° F and 95° F\u003c\/li\u003e\n\u003cli\u003eDo not exceed 10% thinner by volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Interlux_Toplac_Plus_Application_Information.pdf\"\u003e\u003cimg height=\"60\" width=\"60\" alt=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" title=\"pdficon.png\" class=\"__mce_add_custom__\"\u003eClick here for Interlux Toplac Plus Topside Boat Paint Application Information\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg class=\"warningImg\" alt=\"warning sign\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"productWarning\" href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Atlantic Gray \/ Qt","offer_id":43098113015942,"sku":"ILX-YLK684\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Bondi Blue \/ Qt","offer_id":43098113048710,"sku":"ILX-YLK898\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Bounty \/ Qt","offer_id":43098113081478,"sku":"ILX-YLK292\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Cream \/ Qt","offer_id":43098113114246,"sku":"ILX-YLK027\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Donegal Green \/ Qt","offer_id":43098113147014,"sku":"ILX-YLK541\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Flag Blue \/ Qt","offer_id":43098113179782,"sku":"ILX-YLK990\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Ivory \/ Qt","offer_id":43098113212550,"sku":"ILX-YLK187\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Jet Black \/ Qt","offer_id":43098113245318,"sku":"ILX-YLK999\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Lauderdale Blue \/ Qt","offer_id":43098113278086,"sku":"ILX-YLK936\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Matterhorn White \/ Qt","offer_id":43098113310854,"sku":"ILX-YLK198\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Mediterranean White \/ Gal","offer_id":43098113343622,"sku":"ILX-YLK184\/1GLUS","price":172.5,"currency_code":"USD","in_stock":true},{"title":"Mediterranean White \/ Qt","offer_id":43098113376390,"sku":"ILX-YLK184\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Off White \/ Qt","offer_id":43098113409158,"sku":"ILX-YLK192\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Oxford Blue \/ Qt","offer_id":43098113441926,"sku":"ILX-YLK993\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Oyster White \/ Qt","offer_id":43098113474694,"sku":"ILX-YLK194\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Platinum \/ Qt","offer_id":43098113507462,"sku":"ILX-YLK151\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Rochelle Red \/ Qt","offer_id":43098113540230,"sku":"ILX-YLK299\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Sapphire Blue \/ Qt","offer_id":43098113572998,"sku":"ILX-YLK830\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Snow White \/ Gal","offer_id":43098113605766,"sku":"ILX-YLK000\/1GLUS","price":172.5,"currency_code":"USD","in_stock":true},{"title":"Snow White \/ Qt","offer_id":43098113638534,"sku":"ILX-YLK000\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Qt","offer_id":43098113671302,"sku":"ILX-YLK101\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Toplac_Plus__82381.jpg?v=1770148030"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/collections\/Toplac_Plus__82381.jpg?v=1770763385","url":"https:\/\/truewindmarine.com\/collections\/topside-paints.oembed","provider":"True Wind Marine","version":"1.0","type":"link"}