{"title":"Boat Paints","description":null,"products":[{"product_id":"act","title":"Interlux ACT Ablative Antifouling Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux ACT Ablative Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux ACT is a trusted single-season ablative bottom paint that delivers excellent season-to-season protection in moderate to heavy fouling waters. Using Ablative Copolymer Technology, the coating slowly wears away with use, continually exposing fresh biocide at the surface. This controlled erosion helps prevent marine growth while eliminating the heavy paint build-up and aggressive sanding associated with many hard bottom paints.\u003c\/p\u003e\n\u003cp\u003eWith a higher copper content and a built-in Slime Fighter additive, ACT is very effective at controlling shell fouling such as barnacles and zebra mussels, as well as weed, slime and algae. It can be used on fiberglass, wood and properly primed metal hulls (not aluminum) in fresh, salt and brackish water, making it a versatile choice for a wide range of powerboats and sailboats.\u003c\/p\u003e\n\u003cp\u003eAvailable in popular colors including black, blue, red, green and brown, ACT is a go-to ablative paint for boaters and boatyards looking for reliable performance and easier maintenance between haul-outs.\u003c\/p\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eBest Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-season antifouling protection for powerboats and sailboats\u003c\/li\u003e\n\u003cli\u003eBoats kept in moderate to heavy fouling waters (algae, slime, barnacles, zebra mussels)\u003c\/li\u003e\n\u003cli\u003eFresh, salt, and brackish water marinas and moorings\u003c\/li\u003e\n\u003cli\u003eOwners who want an ablative coating that minimizes paint build-up and sanding at recoat time\u003c\/li\u003e\n\u003cli\u003eFiberglass, wood, and properly primed steel or lead hulls below the waterline (not suitable for aluminum)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAblative Copolymer Technology:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCoating wears away in a controlled manner during use, continuously exposing fresh biocide and helping prevent premature wear-through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh copper content with Slime Fighter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFormulated to control hard growth such as barnacles and zebra mussels and soft growth like weed, slime and algae, keeping the hull cleaner for longer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced paint build-up:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBecause the film gradually erodes, there is less old paint to sand off at recoat time compared to many hard bottom paints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeason-to-season protection:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProvides dependable single-season protection when applied at the recommended film thickness and coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-water versatility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCan be used in fresh, salt, and brackish waters, ideal for boats that move between different environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible application:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCan be applied by brush, roller, or airless spray over most existing antifouling coatings that are in sound condition, following Interlux compatibility guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eApplication \u0026amp; System Overview\u003c\/h3\u003e\n\u003cp\u003eInterlux ACT can be applied over most well-adhered antifouling paints or as part of an Interlux system over properly prepared bare substrates. Always read the product label and technical datasheet before starting your bottom paint project.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFiberglass, wood, and properly primed steel or lead below the waterline (not for aluminum hulls or drives).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExisting antifouling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfirm compatibility using the Interlux antifouling compatibility chart. The existing coating must be aged, firmly adhered, and in good condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eApply a minimum of two full coats, with an extra stripe coat on high-wear areas such as the waterline, chines, leading edges and rudders. Three coats are recommended on bare wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethods:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eApply by brush, 3\/8\" nap solvent-resistant roller, or airless spray using equipment suitable for solvent-based marine coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStir or shake ACT thoroughly before and during application to keep the copper and resins evenly mixed. Thin only if necessary, and never more than the maximum amount specified on the label.\u003c\/p\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eSurface Preparation Overview\u003c\/h3\u003e\n\u003cp\u003eProper surface preparation is critical to adhesion and antifouling performance. The summary below should be used in conjunction with the full Interlux instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously painted surfaces – good condition\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScrub the bottom to remove slime, salts and loose growth, then rinse and allow to dry.\u003c\/li\u003e\n\u003cli\u003eSand the existing coating with 80-grit wet-or-dry paper as recommended to create a smooth, dull surface.\u003c\/li\u003e\n\u003cli\u003eRemove all sanding residue and apply the recommended number of coats of ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously painted surfaces – poor condition\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely remove loose, flaking, or excessively built-up antifouling paint.\u003c\/li\u003e\n\u003cli\u003eFor fiberglass and wood, use an appropriate paint remover such as Interstrip 299E; for steel, sandblast to near white metal.\u003c\/li\u003e\n\u003cli\u003eOnce the substrate is clean and sound, follow the appropriate bare fiberglass, bare wood, or primed metal system before applying ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove mold-release agents and wax with the recommended Interlux fiberglass prep products.\u003c\/li\u003e\n\u003cli\u003eFair any imperfections with a suitable marine fairing compound.\u003c\/li\u003e\n\u003cli\u003eFollow either the no-sand, sanding, or blister-prevention system recommended by Interlux, typically involving a primer or barrier coat such as InterProtect® 2000E before applying ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand the surface smooth with 80-grit paper and remove sanding dust.\u003c\/li\u003e\n\u003cli\u003eApply the first coat of ACT thinned slightly with the recommended thinner to aid penetration, then apply additional full-strength coats as directed.\u003c\/li\u003e\n\u003cli\u003eFill seams if needed with an appropriate seam compound before finishing with full coats of ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrimed steel or lead\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrime bare metal below the waterline according to Interlux recommendations.\u003c\/li\u003e\n\u003cli\u003eWithin the primer’s overcoat window, apply the specified number of coats of ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eApplication Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply only when the product and surface temperatures are at or above the minimum temperature specified on the label (typically 50°F \/ 10°C and above).\u003c\/li\u003e\n\u003cli\u003eUse quality solvent-resistant rollers and brushes designed for marine coatings.\u003c\/li\u003e\n\u003cli\u003eRespect the stated drying and recoat times between coats and before launching the boat.\u003c\/li\u003e\n\u003cli\u003eDo not apply ACT over tin-based copolymer antifouling paints.\u003c\/li\u003e\n\u003cli\u003eAfter haul-out, clean the coated surface before relaunching to help reactivate the film and maintain performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways consult the full\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"ACT Bottom Paint Technical Data Sheet\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Interlux-ACT-Bottom-Paint-Application-Instructions.pdf\" target=\"_blank\"\u003eInterlux ACT technical datasheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand product label for complete preparation, application, safety, and dry-time information before beginning your bottom painting project.\u003c\/p\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use Interlux ACT on aluminum hulls or outdrives?\u003c\/strong\u003e\u003cbr\u003eNo. Interlux ACT is not recommended for aluminum hulls, outdrives, or underwater aluminum components. It is designed for use on fiberglass, wood, and properly primed steel or lead below the waterline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs ACT suitable for freshwater and brackish water as well as saltwater?\u003c\/strong\u003e\u003cbr\u003eYes. ACT is formulated as a single-season ablative antifouling paint that can be used in fresh, salt, and brackish waters when applied at the recommended film thickness and coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply ACT over my existing bottom paint?\u003c\/strong\u003e\u003cbr\u003eIn many cases, yes. ACT can be applied over most existing antifouling paints that are aged, tightly adhered, and in good condition. The bottom should be cleaned and prepared as directed, and you should always refer to the Interlux antifouling compatibility chart before overcoating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats of Interlux ACT do I need?\u003c\/strong\u003e\u003cbr\u003eMost boats require at least two full coats of ACT for proper single-season protection, with an additional stripe coat on high-wear areas such as the waterline, chines, rudders, and leading edges. Bare wood and boats in heavy fouling areas may benefit from an extra coat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before launch after applying ACT?\u003c\/strong\u003e\u003cbr\u003eDry and launch times depend on temperature and conditions, but under typical warm-weather conditions you can usually launch the boat the next day after the final coat. Always follow the specific dry-time guidance on the Interlux product label and technical datasheet for your conditions.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"BLACK \/ QT","offer_id":43098110722182,"sku":"ILX-Y7790U-QT","price":63.07,"currency_code":"USD","in_stock":true},{"title":"BLACK \/ Gal.","offer_id":43098110754950,"sku":"ILX-Y7790U-1","price":194.99,"currency_code":"USD","in_stock":true},{"title":"BLUE \/ Gal.","offer_id":43098110787718,"sku":"ILX-Y6690U-1","price":194.99,"currency_code":"USD","in_stock":true},{"title":"BLUE \/ QT","offer_id":43098110820486,"sku":"ILX-Y6690U-QT","price":63.07,"currency_code":"USD","in_stock":true},{"title":"BROWN \/ Gal.","offer_id":43098110853254,"sku":"ILX-Y8890U-1","price":194.99,"currency_code":"USD","in_stock":true},{"title":"GREEN \/ Gal.","offer_id":43098110886022,"sku":"ILX-Y5590U-1","price":194.99,"currency_code":"USD","in_stock":true},{"title":"RED \/ Gal.","offer_id":43098110918790,"sku":"ILX-Y4490U-1","price":194.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/ACT__40018_1.jpg?v=1770419861"},{"product_id":"aqua-one","title":"Interlux Aqua One Ablative Antifouling Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Aqua One Ablative Antifouling Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux\u003cspan\u003e \u003c\/span\u003eis a leading manufacturer of antifouling paint and has been protecting boats with their complete line of protective paints for over a century. Their name is synonymous with unmatched quality and protection.\u003c\/p\u003e\n\u003cp\u003eInterlux Aqua One is a cost-effective ablative antifouling paint and is known for its self-polishing attributes. It can easily be applied with a roller or brush. Aqua One is manufactured with the latest technology in ablative paints to provide comprehensive coverage in all water types. It is designed to limit build-up to avoid sanding between applications.\u003c\/p\u003e\n\u003cp\u003eInterlux Aqua One Ablative Antifouling Paint is a water-based paint that is environmentally safe. It contains a low VOC which produces less odor, making it safe to use indoors and improves drying time. Application is suggested for below the waterline. Interlux Aqua One is not suitable for Aluminum\/alloy or zinc spray materials. Applying over soft antifouling paints is not recommended. It is safe to use on GRP, wood, steel, iron, lead, and over most soft antifouling paints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Protection\u003c\/strong\u003e: The latest in enhanced technology that combines powerful antifouling performance with outstanding protection in all waters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Apply:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEasy to use with brush or roller, indoors or outdoors, and has low odor and VOC emissions. Fast drying times for year-around use and launch. Ablative action wears away with use, minimizing build up and avoiding heavy sanding between applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmentally Responsible:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe solution for boat owners looking for protection, performance and fuel efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArea: Below the waterline\u003c\/li\u003e\n\u003cli\u003eFinish\/Sheen: Matte\u003c\/li\u003e\n\u003cli\u003eSuitable for Aluminum: No\u003c\/li\u003e\n\u003cli\u003eCoverage: 375 sq. ft\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 138 g\/l average\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAirless spray, Airmix, Brush, or Roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2-3 by brush\/roller. Bare wood: 3 coats (first thinned).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e375 ft2\/gl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended DFT per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended WFT per Coat:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater. Thin no more than 10%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Interlux Aqua One Ablative Antifouling Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"2\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDrying\/Overcoating Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTouch Dry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eImmersion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eOvercoat by (min)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e41°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 hours\u003c\/td\u003e\n\u003ctd\u003e48 hours\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e59°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 hours\u003c\/td\u003e\n\u003ctd\u003e8 hours\u003c\/td\u003e\n\u003ctd\u003e5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e73°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 hours\u003c\/td\u003e\n\u003ctd\u003e6 hours\u003c\/td\u003e\n\u003ctd\u003e4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e95°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003ctd\u003e6 hours\u003c\/td\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePainted Surfaces in Good Condition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove all traces of loose paint and contamination by sanding the entire surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePainted Surfaces in Poor Condition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely remove all old antifouling paint using Interstrip 299E for fiberglass and wood.\u003c\/li\u003e\n\u003cli\u003eSandblast to near white metal for steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove mold release wax using Fiberglass Surface Prep YMA601V.\u003c\/li\u003e\n\u003cli\u003eFill any surface imperfections with Interlux Watertite.\u003c\/li\u003e\n\u003cli\u003eFollow one of the application systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - No Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface using the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Interlux Interprotect 2000E.\u003c\/li\u003e\n\u003cli\u003eFollowing overcoating guidelines for the primer, apply at least two coats of Interlux Aqua One allowing appropriate drying times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface using the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply at least two coats of Interlux Aqua One allowing appropriate drying times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Blister Prevention System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface following the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper and remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply Interprotect 2000E to a thickness of 10 mils.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grit paper then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply the first coat of Interlux Aqua One thinned by 10% with water.\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Sea Compound Brown 30.\u003c\/li\u003e\n\u003cli\u003eApply 2 more coats of Aqua-One unreduced, allowing the appropriate dry times between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCan be applied over GRP, Wood, Steel\/Iron, and Lead. Do not use on aluminum\/alloy or zinc sprayed metals. Interlux Aqua One can be applied over most solvent-based antifoulings. Do not apply over soft antifouling paints.\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Aqua_One_Technical_Data_Sheet.pdf.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"50\" height=\"48\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Aqua_One_Technical_Data_Sheet.pdf.pdf?v=1770916769\"\u003e\u003cstrong\u003eClick Here to Download Aqua One Antifouling Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Qt","offer_id":43098111246470,"sku":"ILX-YBE179Q","price":53.28,"currency_code":"USD","in_stock":true},{"title":"Black \/ Gal","offer_id":43098111279238,"sku":"ILX-YBE179G","price":148.96,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098111312006,"sku":"ILX-YBE169G","price":148.96,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098111344774,"sku":"ILX-YBE169Q","price":53.28,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098111377542,"sku":"ILX-YBE159G","price":148.96,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098111410310,"sku":"ILX-YBE149G","price":148.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/interlux_aqua_one_photo__87395.jpg?v=1770916814"},{"product_id":"black-widow","title":"Pettit Black Widow Ablative Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Black Widow Hard Racing Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eAchieve a competitive edge with Pettit Black Widow Bottom Paint, the ultimate choice for high-performance racing. This ultra-slick, hard finish paint reduces drag to maximize speed and efficiency in the water. For optimal results, follow the Pettit Black Widow application instructions closely to ensure a smooth, durable coating that stands up to the toughest racing conditions.\u003c\/p\u003e\n\u003cp\u003ePettit's Black Widow Bottom Paint is the slickest, fastest, ultra-smooth, burnishable racing finish available. Its powerful dual biocides provide high-performance, multi-season protection in all waters. Black Widow also contains four strong slickening agents including Molybdenum Disulfide, PTFE, Graphite, and Silicon, making it the fastest racing paint available. Black Widow is easily applied by roller, brush, or spray and is easily burnishable to a metallic \"gun-metal\" shine. Black Widow makes an excellent paint for the bottom of any boat where speed is the number one priority including racing sailboats and high performance offshore powerboats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlickest, fastest, and easiest to clean racing paint\u003c\/li\u003e\n\u003cli\u003eContains four slickening agents\u003c\/li\u003e\n\u003cli\u003eProvides high performance, multi-season, dual-biocide antifouling protection\u003c\/li\u003e\n\u003cli\u003eCan be polished to mirror-like finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColors Available: 1869 Black, 1269 Dark Blue\u003c\/li\u003e\n\u003cli\u003eSizes Available: 1 US Quart, 1 US Gallon\u003c\/li\u003e\n\u003cli\u003eFinish: Flat\u003c\/li\u003e\n\u003cli\u003eCoverage: 440 ft2\/gal.\u003c\/li\u003e\n\u003cli\u003eVOC: 330 grams\/liter (max)\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Thiocyanate - 25.0%  |  Zinc Pyrithione - 2.50%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003ePettit 120 Brushing Thinner\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For thinning and surface preparation\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-121-paint-spraying-thinner-quart.html\" target=\"_blank\"\u003ePettit 121 Spray Thinner\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For thinning\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\" target=\"_blank\"\u003ePettit Protect Epoxy Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For bare fiberglass application\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Black Widow Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Black Widow paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Black Widow Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit black Widow Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Black Widow provides. (440 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Black Widow has a coverage of 440 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Black Widow Hard Racing Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit Black Widow Bottom Paint is easily applied by brush, roller, or spray. When rolling, only use a high-quality short nap (3\/16\" maximum) roller cover. Mix paint thoroughly prior to application to ensure ingredients are evenly dispersed throughout the can. All surfaces must be clean, dry, and properly prepared prior to painting. Do not apply Black Widow directly on aluminum hulls or outdrives without properly priming first. When spraying, do not thin Black Widow more that 5% or inadequate film thickness will occur.\u003c\/p\u003e\n\u003cp\u003eBurnishing of Black Widow to create a slicker finish can be done with 400 - 1200 grit wet or dry sandpaper after the coating has dried for at least 48 hours to achieve a smooth but matte finish. For a glossy finish, sand with 3000-5000 grit sandpaper. If burnishing, a third or fourth coat of Black Widow is recommended depending on application method.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush, roller, airless or conventional spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eNumber of Coats: \u003c\/strong\u003e1 minimum per season with additional coats for extended service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDry Film Thickness: \u003c\/strong\u003e2 mils (3.6 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 440 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003e120 Brushing Thinner. 121 Spraying Thinner, or 120VOC Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90°F\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e24 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eSurface Preparation and Application Systems\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Widow can be applied over most aged hard antifouling coatings.\u003c\/li\u003e\n\u003cli\u003eOld tin copolymers must be removed completely or sealed with Tie-Coat Primer before applying Black Widow.\u003c\/li\u003e\n\u003cli\u003eIf previous coating is in good condition:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly sand with 80 grit sandpaper then solvent clean with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Black Widow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eIf previous coating is in poor condition:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove to the bare surface by sanding or using paint remover.\u003c\/li\u003e\n\u003cli\u003eProceed with one of the bare systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass should be thoroughly cleaned with Pettit 92 Bio-Blue Hull Surface Prep or dewaxed several times with D95 Dewaxer.\u003c\/li\u003e\n\u003cli\u003eProceed with either Sanding Method or the Non-Sanding Methods below.\u003c\/li\u003e\n\u003cli\u003eSanding Method:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit production paper to a dull, frosty finish.\u003c\/li\u003e\n\u003cli\u003eRewash surface with Pettit 120 or 120VOC Brushing Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Black Widow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eNon-Sanding Method:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, de-wax, and etch the surface with 92 Bio-Blue Hull Surface Prep using a medium Scotch-Brite pad.\u003c\/li\u003e\n\u003cli\u003eThoroughly rinse all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Pettit Protect Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eApply two thin finish coats of Black Widow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper and wipe clean using Pettit 120 or 120VOC Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply a coat of Black Widow thinned 25% with Pettit 120 or 120VOC Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eAllow an overnight dry, lightly sand, and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply two thin finish coats of Black Widow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Steel and Cast Iron\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove loose rust and scale from the metal surface by sandblasting or wire brushing.\u003c\/li\u003e\n\u003cli\u003eImmediately clean surface with vacuum or fresh air blast.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Pettit Rustlok Steel Primer, allowing each to dry only 1-2 hours before over coating.\u003c\/li\u003e\n\u003cli\u003eFollow by two coats of Pettit Protect Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eIf fairing is required, apply Pettit EZ-Fair between the two coats of Pettit Protect.\u003c\/li\u003e\n\u003cli\u003eApply two thin finish coats of Black Widow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-Black-Widow-Bottom-Paint-Application-Instructions.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"57\" height=\"55\"\u003e\u003cstrong\u003eClick to Download Pettit Black Widow Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098111672454,"sku":"PET-1869G","price":389.95,"currency_code":"USD","in_stock":true},{"title":"Dark Blue \/ Gal","offer_id":43103313559686,"sku":"PET-1269G","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Black_Widow_photo__24688.jpg?v=1770420131"},{"product_id":"bilgekote","title":"Interlux Bilgekote Bilge Enamel Marine Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Bilgekote Bilge Enamel Marine Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux Bilgekote is a fast drying, durable coating formulated for application to bilge areas. This paint helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Features a semi gloss finish and is available in white or gray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHard wearing coating for bilges and bulkheads.\u003c\/li\u003e\n\u003cli\u003eChemical resistance to fumes, fuel and oil.\u003c\/li\u003e\n\u003cli\u003eHigh opacity for thorough coverage.\u003c\/li\u003e\n\u003cli\u003eCleans easily for reduced upkeep.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSold in quarts\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Interlux Bilgekote Marine Paint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method: \u003c\/strong\u003eBrush, roller, or spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003eTwo coats minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e450 sq. ft.\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003eBrushing Liquid 333 or Special Thinner 216\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDry Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  59°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  73°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  95°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Touch Dry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e  3 hours\u003c\/td\u003e\n\u003ctd\u003e  2 hours\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Overcoated By (min)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e  16 hours\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003ctd\u003e  8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass In Good Condition:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eRinse with fresh water and allow to dry.\u003c\/li\u003e\n\u003cli\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/li\u003e\n\u003cli\u003eSand with 180 grade paper. Remove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass In Poor Condition:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean as above.\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply 1-2 coats of Pre-Kote primer.\u003c\/li\u003e\n\u003cli\u003eSand each coat with 120 grit sandpaper then remove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface then wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply Pre-Kote, sand surface and wipe clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Metal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast or grind, remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eWithin 1 hour of abrasion, apply 1 coat of Interprotect 2000E thinned 15-20%.\u003c\/li\u003e\n\u003cli\u003eFollowing the overcoating guidelines for Interprotect 2000E. Apply 1-2 coats of Pre-Kote.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eClear Epoxy\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eRinse with fresh water and allow to dry.\u003c\/li\u003e\n\u003cli\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/li\u003e\n\u003cli\u003eSand with 80 grit paper then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Epoxy Primekote or Interprotect 2000E.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThe surface must be clean and dry.\u003c\/li\u003e\n\u003cli\u003eSand using 180-220 grit paper, then remove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply 2-3 coats of Bilgekote following the proper dry times.\u003c\/li\u003e\n\u003cli\u003eSand between coats using 220-230 grit paper, then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eBilgekote may be applied by roller and brush using the roll and tip method.\u003c\/li\u003e\n\u003cli\u003eBilgekote may also be applied by spray.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Bilgekote_Marine_Paint.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"56\" height=\"53\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/How_to_Apply_Bilgekote_Marine_Paint.pdf?v=1770916898\" title=\"How to Apply BilgeKote Marine Paint\" target=\"_blank\" rel=\"noopener\"\u003eClick to Download Interlux Bilgekote Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Gray \/ Qt.","offer_id":43098111869062,"sku":"ILX-YMA100","price":39.03,"currency_code":"USD","in_stock":true},{"title":"White \/ Qt.","offer_id":43098111901830,"sku":"ILX-YMA102","price":39.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Interlux_Bildgekote_photo__85816.jpg?v=1770917008"},{"product_id":"copper-bronze-hard-racing","title":"Pettit Old Salem Copper Bronze Hard Racing Non-Antifouling Marine Paint","description":"\u003cp\u003e\u003cstrong\u003ePettit Old Salem Copper Bronze Hard Racing Non-Antifouling Marine Paint\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePettit Old Salem is recommended for use in fresh water on racing hulls, sailboats, runabouts or cruisers. It is a non-antifouling hard racing finish that can be buffed to give a high-gloss, ultra-smooth surface. It can be used in saltwater for small, dry sailed boats which are not left in the water. Hard Racing Copper Bronze may be applied over most aged hard racing non-antifouling coatings. If the old paint type is unknown, sand a small area and apply a test patch of Hard Racing Copper Bronze to test its compatibility with the old paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent for trailered boats\u003c\/li\u003e\n\u003cli\u003eSuitable for use on fiberglass, wood and steel hulls\u003c\/li\u003e\n\u003cli\u003eCan be buffed to give high gloss, ultra smooth surface\u003c\/li\u003e\n\u003cli\u003eFor dry sailed boats or boats stored in fresh water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eGlossy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e800 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e**DO NOT USE THIS PRODUCT ON ALUMINUM HULLS OR OUTDRIVES.**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"tab_label classyunicodedone\"\u003eHow to Apply\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO APPLY PETTIT OLD SALEM COPPER BRONZE HARD RACING NON-ANTIFOULING MARINE PAINT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush, Roller, Airless or Conventional Spray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBronze\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eGlossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Temp:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e50°F Minimum | 90°F Maximum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThinners:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e120 Brushing Thinner | 121 Spraying Thinner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e800 sq. ft. \/gal.\u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e Temp.\u003c\/td\u003e\n\u003ctd\u003e To Recoat\u003c\/td\u003e\n\u003ctd\u003eTo Launch \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e 90°F\u003c\/td\u003e\n\u003ctd\u003e 8 Hours\u003c\/td\u003e\n\u003ctd\u003e 2 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70°F \u003c\/td\u003e\n\u003ctd\u003e16 Hours \u003c\/td\u003e\n\u003ctd\u003e4 Days \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F \u003c\/td\u003e\n\u003ctd\u003e36 Hours \u003c\/td\u003e\n\u003ctd\u003e8 Days \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRE-APPLICATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOld Salem Copper Bronze Hard Racing Paint is loaded with copper flake pigment. There is a tendency for settling to occur, especially if the paint has been on the shelf for several months.\u003c\/li\u003e\n\u003cli\u003eIt is necessary to thoroughly mix and paint before using.\u003c\/li\u003e\n\u003cli\u003eBefore using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethin Copper Bronze Hard Racing more than 5% (6.4 ounces per gallon).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSURFACE PREPARATION AND APPLICATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface completely smooth with 80 grit production paper. Wipe surface clean using a rag dampened with Pettit 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply a coat of Pettit 6627 Tie Coat Primer thinned 25% with the 120 Brushing Thinner to penetrate and seal the wood.\u003c\/li\u003e\n\u003cli\u003eFill any open seams with Pettit Seam Compound (7110 White or 7610 Mahogany) and allow to dry overnight.\u003c\/li\u003e\n\u003cli\u003eApply 2 coats of Old Salem Copper Bronze Hard Racing Paint, taking note of the dry times listed above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, must be thoroughly cleaned using 95 Fiberglass Dewaxer and clean lint-free rags. Several cleanings may be necessary to ensure complete removal of contaminants.\u003c\/li\u003e\n\u003cli\u003eNew boats must be scrubbed with a detergent and water solution and rinsed with fresh water prior to dewaxing.\u003c\/li\u003e\n\u003cli\u003eAfter the surface has been dewaxed, sand it thoroughly with 80 grit production paper and rewash the sanded surfaces with 95 Dewaxer or 120 Brushing Thinner to remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Pettit Protect 4700\/4701 High Build Epoxy Primer. When thoroughly dry, sand with 80 grit paper and wipe clean again.\u003c\/li\u003e\n\u003cli\u003eApply 2 coats of Old Salem Copper Bronze Hard Racing Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf sanding is prohibited, or is otherwise impractical, make sure the surface has been completely dewaxed and cleaned with Pettit 95 Fiberglass Dewaxer. Then, apply one, thin, continuous coat of Pettit 6999 Sandless Primer. Top coat with two coats of Old Salem Copper Bronze Hard Racing Paint, following the topcoating instructions on the Sandless Primer label.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnderwater Metal Parts and Keels:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWash the surface with Pettit 120 Brushing Thinner to remove any oil film or grease.\u003c\/li\u003e\n\u003cli\u003eThe metal should be abraded with emery cloth to a bright texture.\u003c\/li\u003e\n\u003cli\u003eRemove all sanding residue by vacuuming or with clean, compressed air.\u003c\/li\u003e\n\u003cli\u003eApply one, thin wet coat of Pettit 6455 Metal Primer. Allow to dry at least two hours.\u003c\/li\u003e\n\u003cli\u003eApply 2 coats of Pettit 6627 Tie Coat Primer followed by 2 coats of Old Salem Copper Bronze Hard Racing Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInformation sourced from the Pettit Old Salem 1059 Hard Racing Copper Bronze Non-Antifouling technical bulletin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Old_Salem.pdf\" title=\"How to Apply PDF\" target=\"_parent\"\u003e\u003cimg height=\"39\" width=\"40\" alt=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" title=\"pdficon.png\" class=\"__mce_add_custom__\"\u003e\u003c\/a\u003e \u003ca rel=\"noopener\" title=\"How to Apply Old Salem Bottom Paint\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/How_to_Apply_Pettit_Copper_Bronze_Antifouling.pdf?v=1770918998\" target=\"_blank\"\u003e\u003cstrong\u003eHow to Apply\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg class=\"warningImg\" alt=\"warning sign\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"productWarning\" href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Qt","offer_id":43098114097286,"sku":"PET-1959Q","price":103.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Old_Salem_Bronze_SKUs__21020.jpg?v=1770919246"},{"product_id":"copper-bronze-anti-fouling","title":"Pettit Copper Bronze Antifouling Bottom Paint","description":"\u003cdiv class=\"productView-description\" id=\"description-tab\"\u003e\n\u003cp\u003e\u003cstrong\u003ePettit Copper Bronze Antifouling Bottom Paint\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper Bronze is an excellent, general purpose antifouling for boaters desiring aggressive bottom protection in an easy to apply, cosmetically attractive finish. Copper Bronze antifouling is resistant to algae, barnacles, grass, zebra mussels, etc. Copper Bronze antifouling is equally effective in both fresh and saltwater and is also ideal for trailered boats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCuprous Oxide for aggressive antifouling protection\u003c\/li\u003e\n\u003cli\u003eHard, modified epoxy finish withstands season-long use and abuse\u003c\/li\u003e\n\u003cli\u003eCompatible with most previously applied bottom paints\u003c\/li\u003e\n\u003cli\u003eSuitable for use on fiberglass, wood and steel hulls\u003c\/li\u003e\n\u003cli\u003eExcellent protection for trailered boats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFlat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e400 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"tab_label classyunicodedone\"\u003eHow To Apply\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION DATA METHOD\u003c\/strong\u003e: Brush, Roller, Airless or Conventional Spray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDRY FILM THICKNESS PER COAT: \u003c\/strong\u003e2 mils (4.1 wet mils)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e400 sq. ft\/gal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION TEMP:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e40°F Min. \/ 90°F Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHINNER:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e120 Brushing, 121 Spraying\u003c\/p\u003e\n\u003ctable border=\"1\" id=\"Dry Times\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003ctd\u003eTo Launch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70°F\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003ctd\u003e16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e24 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePREVIOUSLY PAINTED SURFACES:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIf the previous coating is in good condition, thoroughly sand with 80 grit paper then solvent clean with 120 Brushing Thinner to remove residue. Apply two finish coats of Copper Bronze. If the previous coating is soft or in poor condition, remove to the bare surface by sanding or using Pettit 9051 Bio Blast Paint Remover. Proceed with appropriate bare system as described below. Old tin copolymers should be removed or sealed with Pettit 6627 Tie Coat Primer before applying Copper Bronze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned several times with Pettit 95 Fiberglass Dewaxer or 120 Brushing Thinner. Sand thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash the sanded surface with 95 Fiberglass Dewaxer or 120 Brushing Thinner to remove sanding residue. Then apply two coats of Copper Bronze, following application instructions. Careful observation of the above instructions will help ensure long term adhesion of this and subsequent years’ antifouling paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE WOOD:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSand entire surface with 80 grit paper; wash clean with 120 Brushing Thinner. Apply a coat of Copper Bronze thinned 25% with 120 Brushing Thinner, allow an overnight dry, lightly sand and wipe clean. Apply two fi nish coats of Copper Bronze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEL HULLS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSandblast or disc sand to a clean, bright finish and remove residue. Then either immediately apply two coats of 6980 Rustlok Steel Primer, allowing each to dry only 1-2 hours prior to overcoating - OR - immediately apply one thin coat of 6455 Metal Primer and allow to dry two hours; follow with two coats of 6627 Tie Coat Primer, allowing each to dry two hours minimum. Apply two finish coats of Copper Bronze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEELS - LEAD:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAbrade surface to bright metal; clean off residue. Apply one thin coat of 6455\/044 Metal Primer; allow to dry two hours. Apply one coat of Pettit 6627 Tie Coat Primer then, if fairing is required, apply Epoxy Fairing Compound. Follow with an additional coat of 6627 Tie Coat Primer per label directions. Apply two finish coats of Copper Bronze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEELS - STEEL OR CAST IRON:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAbrade surface to bright metal; clean off residue. Apply one coat of 6980 Rustlok Steel Primer, allowing to dry only 1 - 2 hours prior to overcoating. Then, if fairing is required, apply Epoxy Fairing Compound followed by two coats of Pettit 6627 Tie Coat Primer, finish with two finish coats of Copper Bronze.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e**DO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.**\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCopper Bronze is loaded with cuprous oxide. As a result of this there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible shake the can of paint on a mechanical paint shaker. Before using check the sides and bottom of the can to make sure all the pigment has been mixed in. If mixing is going to be done with a wooden paddle or an electric drill mixer, pour off half of the liquid from the top of the can into another can and then properly mix in any settled pigment; then remix the two parts together thoroughly. Adhere to all application instructions, precautions, conditions and limitations to obtain optimum performance. Refer to individual labels and tech sheets for detailed instructions when using associated products, etc. Do not thin Copper Bronze more than 10% (12 ounces per gallon) or inadequate paint fi lm thickness will occur and premature erosion of the fi nish will be likely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Copper_Bronze_Antifouling.pdf\" title=\"How to Apply PDF\" target=\"_parent\"\u003e\u003cimg height=\"39\" width=\"40\" alt=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" title=\"pdficon.png\" class=\"__mce_add_custom__\"\u003e\u003c\/a\u003e \u003ca rel=\"noopener\" title=\"How to Apply Pettit Copper Bronze Antifouling\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/How_to_Apply_Pettit_Copper_Bronze_Antifouling.pdf?v=1770918998\" target=\"_blank\"\u003e\u003cstrong\u003eHow to Apply\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg class=\"warningImg\" alt=\"warning sign\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"productWarning\" href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Qt","offer_id":43098114490502,"sku":"PET-1933Q","price":120.14,"currency_code":"USD","in_stock":false},{"title":"Gal","offer_id":43098114523270,"sku":"PET-1933G","price":368.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Copper_Bronze_Antifouling_Bottom_Paint__60788.jpg?v=1770919100"},{"product_id":"ez-poxy-enhancer","title":"Pettit EZ-Poxy Topside Finish Performance Enhancer","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ-Poxy Topside Finish Performance Enhancer\u003c\/h2\u003e\n\u003cp\u003ePettit's EZ-Poxy Performance Enhancer is an additive that increases gloss, harness, and longevity of Pettit solvent-based topside paints. Its advanced formulation reacts with the paint it is mixed in to \"cross-link\" polymers within the paint film, providing exceptional durability, gloss-retention, scratch resistance, and longevity. Additionally, this paint accelerates dry time by up to 40% and increases hardness by up to 25%. Unlike other two-part urethanes, paints catalyzed with this hardener can be applied over well-adhered one-part finishes. With Pettit EZ-Poxy Performance Enhancer, achieving a high quality, long lasting yacht finish is easy.\u003c\/p\u003e\n\u003cp\u003eRecommended for use with the following Pettit Paints: EZ-Poxy, EZ-Decks, EZ-Bilge, Captain's Varnish, Flagship Varnish, High Build Varnish, and Captain's Ultra-Clear Varnish. Do not use EZ-Poxy Performance Enhancer in epoxies, lacquers, two-part polyurethanes, or water-based paint systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases gloss, harness, durability and longevity\u003c\/li\u003e\n\u003cli\u003eCompatible with Pettit solvent-based topside finishes\u003c\/li\u003e\n\u003cli\u003eIncreases flow out of brush strokes and roller stipple, providing a high gloss finish\u003c\/li\u003e\n\u003cli\u003eAccelerates dry time by up to 40%\u003c\/li\u003e\n\u003cli\u003eIncreases hardness by up to 25%\u003c\/li\u003e\n\u003cli\u003eRaises gloss by up to 10%\u003c\/li\u003e\n\u003cli\u003eImproves resistance to chemicals and solvents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: 8 oz.\u003c\/li\u003e\n\u003cli\u003eMix Ratio: 16:1 Paint:Hardener by volume\u003c\/li\u003e\n\u003cli\u003eCuring mechanism: Chemical cure\u003c\/li\u003e\n\u003cli\u003eVOC: 604 g\/l\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Use Pettit EZ-Poxy Performance Enhancer\u003c\/h2\u003e\n\u003cp\u003eThe substrate and air temperatures must be between 50°F and 90°F throughout the entire mixing, application, and curing process. For best results when applying multiple coats, EZ-Poxy Performance Enhancer should be added to all the layers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix Ratio:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e16:1 Paint:Hardener by volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp\u003c\/strong\u003e: 50°F  Min \/ 90°F Max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStir EZ-Poxy Performance Enhancer and paint or varnish thoroughly before mixing. EZ-Poxy Performance Enhancer should be mixed at a 16:1 ratio of paint to catalyst. The entire 8 ounce can of EZ-Poxy Performance Enhancer should be mixed with a gallon of paint. Add two ounces, or six cap-fulls of hardener per quart. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePaints mixed with EZ-Poxy Performance Enhancer do not require an induction time, so once mixed, application should begin immediately.\u003c\/li\u003e\n\u003cli\u003eThe mixed paint can be applied by brush and\/or roller. DO NOT SPRAY.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor brush or roller application, the paint may be thinner 5-10% to aid in flow out and to maintain a wet edge.\u003c\/li\u003e\n\u003cli\u003eIn hot weather and when using darker colors, the paint may be thinned up to 20%.\u003c\/li\u003e\n\u003cli\u003eFor best results on large, smooth surfaces, roll out using a high density foam roller. Level off with the tip of a brush.\u003c\/li\u003e\n\u003cli\u003eApply one thin coat per day. After an overnight dry, lightly sand with 320-grit sandpaper and apply a second coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-EZ-Poxy-Performance-Enhancer-Data-Sheet.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"52\" height=\"50\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit-EZ-Poxy-Performance-Enhancer-Data-Sheet.pdf?v=1771379334\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eClick to Download Pettit EZ-Poxy Performance Enhancer Data Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"8 Oz","offer_id":43098115375238,"sku":"PET-3021","price":27.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/ezpoxy-performance-enhancer__74253.jpg?v=1771379379"},{"product_id":"ez-poxy","title":"Pettit Easypoxy High Gloss Topside Marine Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ Poxy High Gloss Topside Marine Paint\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003ePettit Easypoxy delivers professional-grade protection for above-waterline boat surfaces with its advanced polyurethane formula. This high-gloss topside paint resists fading, chalking, and UV damage while standing up to saltwater, weather exposure, and general wear. The self-leveling formula applies smoothly by brush, roller, or spray, covering up to 600 square feet per gallon. Available in 34 colors with quart and gallon sizes, it works on properly prepared fiberglass, wood, and metal surfaces. Apply at least two coats between 50°F and 90°F for optimal results and long-lasting durability in harsh marine conditions.\u003c\/p\u003e\n\u003cp\u003eNOTE: Ground-shipped within the Continental U.S. only.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eFeatures\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHigh-Gloss Finish: This high-gloss marine paint creates a stunning finish that resists fading and chalking, providing a durable and sleek aesthetic. Its UV-resistant properties prevent fading even with constant sunlight exposure.\u003c\/li\u003e\n\u003cli\u003eDurable and Weather-Resistant Formula: Pettit topside paint is formulated to withstand the harsh marine environment. Its durability protects against abrasion, scratches, and wear caused by exposure to saltwater, wind, and weather.\u003c\/li\u003e\n\u003cli\u003eEasy Application: Both experienced boaters and beginners can apply Pettit EZ Poxy to achieve a professional finish. Use a brush, roller, or sprayer, and let its self-leveling properties and user-friendly formula achieve stunning results. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eFinish: High-gloss\u003c\/li\u003e\n\u003cli\u003eCoverage: Up to 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: At least two coats minimum\u003c\/li\u003e\n\u003cli\u003eColors: 34 colors available; refer to our Pettit paint color chart\u003c\/li\u003e\n\u003cli\u003ePack Size: Available in one quart for all colors and one gallon for White, Hatteras Off-White and Semi-Gloss White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eAssociated Products\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eTo get the best results, pair your Pettit EZ Poxy with these products:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\"\u003ePettit 120 Thinner\u003c\/a\u003e: Use for brushing, rolling, and clean-up\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-121-paint-spraying-thinner-quart\/\"\u003ePettit 121 Thinner\u003c\/a\u003e: Use for spraying\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-easypoxy-high-gloss-topside-marine-paint\/\"\u003ePettit Satin Additive\u003c\/a\u003e: Achieve a semi-gloss to semi-flat finish that reduces glare on deck surfaces and interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-easypoxy-high-gloss-topside-marine-paint\/\"\u003ePettit EZ-Prime\u003c\/a\u003e: Before applying Pettit topside paint, apply a primer as a base coat, particularly on surfaces that are aged, cracked, checked, pitted, rough, or not fully smooth, to ensure optimal adhesion and a flawless finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eHow To Apply Pettit Easypoxy Topside Paint\u003c\/span\u003e\u003c\/h2\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003ePettit EZ Poxy is best applied in temperatures between 50°F and 90°F, with low humidity and no rain. Avoid painting in direct sunlight or extreme heat, which may affect drying and leveling.\u003c\/li\u003e\n\u003cli\u003ePrepare your surface for paint application. Refer to our “Non-Fiberglass Surface Preparation” guide below.\u003c\/li\u003e\n\u003cli\u003eStir the paint thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eApply a thin, even coat with a brush, roller, or spray, and let it dry overnight.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightly sand with 220 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply a second coat and let it cure for 8 to 24 hours, depending on your area’s temperatures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eApplication Notes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eDry Film Thickness per Coat: 1.5 mils (3 wet mils)\u003c\/li\u003e\n\u003cli\u003eCoverage: 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eApplication Temp: 50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003eAvoid applying multiple coats in a single day. Applying excessively thick layers over 4 wet mils can prevent proper drying and produce a soft, under-cured paint film.\u003c\/li\u003e\n\u003cli\u003eAvoid painting on extremely humid days (90°+ RH) or when it’s raining.\u003c\/li\u003e\n\u003cli\u003eAvoid painting outdoors in the late afternoon, as dew can negatively impact the wet paint film and compromise the finish.\u003c\/li\u003e\n\u003cli\u003eIn cooler temperatures, ensure that the air and surface temperatures stay at or above 50°F for at least 8 hours after application to allow proper curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eAlthough thinning Pettit EZ Poxy paint is not recommended for brush or roller applications, up to 10% of Pettit 120 Brushing Thinner can be added in hot weather to help maintain a wet edge. For optimal results on large, smooth surfaces, use a short roller and level it with the tip of a brush.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor traditional spray applications, thin Pettit EZ-Poxy using 15 to 20% of Pettit 121 Spraying Thinner. For airless sprays, use up to 5% and a tip size between 0.11 and 0.15 inches in diameter for proper application.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTemp\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTo Recoat\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTo Launch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e90°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e8 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e70°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e3 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e16 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e50°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e24 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg title=\"pdficon.png\" src=\"https:\/\/lh7-rt.googleusercontent.com\/docsz\/AD_4nXeyVZe_KJUnlG8e_hrIl-1vhFzcNbVkdtesWj6kqFL0KfjQAZJd-F5KGE-02WP64rnzTlp1WjCdGnYHyd0brmhyGAsIscVpw_7IwcHv0XGX0bMbLRO82Gp6evD0UUCOkiGk4gcp?key=cdmlQ1YmmSmNKf5bym2fAF1R\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-EZ-Poxy-Topside-Paint-Application-Information.pdf\"\u003eClick to Download Pettit Easypoxy Application Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eFiberglass Application \u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg src=\"https:\/\/lh7-rt.googleusercontent.com\/docsz\/AD_4nXdfWmKCs_lfvFgYegq63sKG4HOXtr47TgqGeGqbcEJFe8QKe08zfwdoFl2jBWnq5Zn8OidbqvSWQ7wYI2quSnofclQnUwki3sGs2yyClT1HhhOQwsv-fByqrbabL01i2Ql_AYAM?key=cdmlQ1YmmSmNKf5bym2fAF1R\" alt=\"\" width=\"579\" height=\"251\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eNon-Fiberglass Application \u003c\/h3\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eBare Wood\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eSand bare wood with 80 to 120 grit sandpaper until smooth. If the wood has been epoxied, scrub thoroughly with an ammonia\/water solution, sand with 120 grit, and clean with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eUse 7050 EZ-Fair Epoxy Fairing Compound to fill screw heads or small holes. Sand the filled areas flush and clean with the same thinner.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 2018 EZ WoodSealer to seal the porous grain. For epoxied wood, skip the sealer and move directly to priming.\u003c\/li\u003e\n\u003cli\u003eApply one or two coats of 6149 EZ Prime, sanding each coat with 80-120 grit sandpaper and cleaning with Pettit 120 Thinner between coats until a smooth base is achieved.\u003c\/li\u003e\n\u003cli\u003eOnce the primed surface is clean and smooth, proceed with the first coat of Pettit Easypoxy for a durable, high-gloss finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSteel Hulls\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eClean the surface to a bright finish by sandblasting or grinding, then remove any blast residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 6980 Rustlok Primer and let it dry until tacky. For rough surfaces, apply a coat of 6627 Tie-Coat Primer. Sand before cleaning with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eRepeat as needed until smooth, then apply the first coat of Pettit EZ Poxy.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eAluminum\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eRemove oil and grease using Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eUse a medium-grit emery cloth to remove oxidation, etch the surface, and then clean off any sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a thin coat of 6455\/044 Metal Primer and let it dry for at least two hours. Optionally, use 6149 EZ Prime for additional smoothing before applying the first coat\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this paint require a primer before application?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, Pettit EZ Poxy requires a primer when applied to bare surfaces such as fiberglass, wood, or metal. Pettit recommends using a compatible primer to ensure proper adhesion and durability.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs Pettit EZ Poxy suitable for fiberglass, wood, or metal surfaces?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, Pettit EZ Poxy is designed for fiberglass, wood, and properly primed metal surfaces. Its versatile formula ensures excellent adhesion and a durable finish on all compatible substrates.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan this paint be applied over existing paint, or must it be removed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePettit EZ Poxy can be applied over existing paint, provided the surface is clean, sanded, and free of loose or peeling material. For the best results, ensure compatibility with the existing paint type.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Light Blue \/ Quart","offer_id":43098115801222,"sku":"PET-3210Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Black \/ Aerosol","offer_id":43098115833990,"sku":"PET-3801A","price":22.15,"currency_code":"USD","in_stock":false},{"title":"Blue Glo-White \/ Quart","offer_id":43098115866758,"sku":"PET-3176Q","price":55.26,"currency_code":"USD","in_stock":false},{"title":"Bristol Beige \/ Quart","offer_id":43098115899526,"sku":"PET-3522Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Dark Blue \/ Quart","offer_id":43098115932294,"sku":"PET-3290Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Flag Blue \/ Quart","offer_id":43098115965062,"sku":"PET-3239Q","price":60.72,"currency_code":"USD","in_stock":true},{"title":"Kingston Gray \/ Quart","offer_id":43098115997830,"sku":"PET-3716Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Largo Blue \/ Quart","offer_id":43098116030598,"sku":"PET-3247Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Matterhorn White \/ Quart","offer_id":43098116063366,"sku":"PET-3111Q","price":55.26,"currency_code":"USD","in_stock":true},{"title":"Medium Blue \/ Quart","offer_id":43098116096134,"sku":"PET-3230Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Off White \/ Quart","offer_id":43098116128902,"sku":"PET-3107Q","price":55.26,"currency_code":"USD","in_stock":true},{"title":"Off-White \/ Aerosol","offer_id":43098116161670,"sku":"PET-3108A","price":22.15,"currency_code":"USD","in_stock":true},{"title":"Platinum \/ Aerosol","offer_id":43098116194438,"sku":"PET-3711A","price":22.15,"currency_code":"USD","in_stock":true},{"title":"Sapphire Blue \/ Aerosol","offer_id":43098116227206,"sku":"PET-3237A","price":22.15,"currency_code":"USD","in_stock":true},{"title":"Sea Green \/ Quart","offer_id":43098116259974,"sku":"PET-3352Q","price":56.62,"currency_code":"USD","in_stock":true},{"title":"Sundown Buff \/ Quart","offer_id":43098116292742,"sku":"PET-3523Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"White \/ Aerosol","offer_id":43098116325510,"sku":"PET-3175A","price":22.15,"currency_code":"USD","in_stock":false},{"title":"Yellow \/ Quart","offer_id":43098116358278,"sku":"PET-3457Q","price":57.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Easypoxy_High_Gloss_Topside_Marine_Paint__63706_7148dbd9-9353-45ba-b06d-251371c7dd03.jpg?v=1770420706"},{"product_id":"eco-hrt-1","title":"Pettit ECO HRT Copper-Free Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit ECO Hybrid Reactive Technology (HRT) Copper-Free Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit ECO HRT Copper-Free Antifouling Paint is engineered with the latest technology available to create a strong hybrid paint film able to handle the harshest marine environments without building up over time. Pettit HRT ECO’s smooth durable paint surface is designed to wear away over time thereby eliminating paint build up as well as the need for sanding. Pettit HRT ECO Copper-Free Bottom Paint is safe for use on any aluminum-hulled boat. This copper-free bottom paint provides excellent antifouling protection; hauling and relaunching won't reduce its effectiveness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is HRT?\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eHybrid Reactive Technology utilizes high-density biocide to maximize effectiveness. That along with film modifiers to reduce yearly build-up, it can maintain color consistency and lower weight impact on the water vessel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is ECO?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eECO means the paint uses Econea instead of copper. Econea is a copper free biocide that provides great protection at very low concentrations. Pettit HRT ECO contains 6% Econea which has been shown to be as effective as bottom paints made with roughly 50% copper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in gallons\u003c\/li\u003e\n\u003cli\u003eCopper free\u003c\/li\u003e\n\u003cli\u003eSafe for aluminum boats\u003c\/li\u003e\n\u003cli\u003eEconomical hybrid protection\u003c\/li\u003e\n\u003cli\u003eSmooth durable polishing finish\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eSingle Season Antifouling Paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eActive Ingredients:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6% Econea\u003c\/li\u003e\n\u003cli\u003e4.8% Zinc Omadine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1200 Blue, 1300 Pontoon Gray, 1800 Black\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much ECO HRT do I need for my boat?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 Gallon Pettit ECO HRT Copper-Free Antifouling Paint covers 500 Sq Ft\u003c\/li\u003e\n\u003cli\u003eBoat Length X Width X .85 = Sq Ft per coat of paint (Example: 30ft boat 8.5 wide is 216.75 Sq Ft Per Coat)\u003c\/li\u003e\n\u003cli\u003eMultiple Sq Ft by Number of Coats 2-3 for total number of Sq ft for the job.\u003c\/li\u003e\n\u003cli\u003eWholesale Marine would recommend 1 Gallon for this Job. 2 Coats + Some Extra for Touch Up or waste.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Pettit ECO HRT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePettit ECO HRT Copper-Free Antifouling Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap roller cover. Apply using thin coats. ECO HRT has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEggshell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e500 ft2\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 minimum per season with additional coat at waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.7 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.5 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\"\u003e120 Brushing Thinner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePettit HRT ECO can be applied over most aged hard and ablative antifouling coatings.\u003c\/li\u003e\n\u003cli\u003eOld tin copolymers must be removed completely or sealed with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-specialty-tiecoat-metal-marine-primer-for-all-paint-types.html\"\u003ePettit 6627 Tie-Coat Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ebefore applying this product.\u003c\/li\u003e\n\u003cli\u003eIf the previous coating is in good condition, thoroughly sand with 80 grit sandpaper then solvent clean with Pettit 120 Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of ECO HRT.\u003c\/li\u003e\n\u003cli\u003eIf the previous coating is soft or in poor condition, remove to the bare surface by sanding or using paint remover. Proceed with an appropriate bare system as described below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-bio-blue-marine-hull-surface-prep-79179.html\"\u003e92 Bio-Blue Hull Surface Prep\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor de-waxed several times with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-bottom-prep-fiberglass-marine-dewaxer.html\"\u003ePettit D-95 Dewaxer\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eProceed with either sanding method, or one of the non-sanding methods below:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSanding Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter the surface has been de-waxed, sand thoroughly with 8 grit production paper to a dull, frosty finish and rewash the sanded surface with Pettit 120 Thinner to remove sanding residue. Then apply two thin coats of ECO HRT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Sanding Method (1):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePrep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit D95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip- Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of Pettit HRT ECO .\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Sanding Method (2):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThoroughly clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a coarse Scotch-Brite pad in a swirling motion. Thoroughly rinse all residue from the surface and let dry. Then apply one coat of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\"\u003ePettit-Protect High Build Epoxy Primer\u003c\/a\u003e. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of ECO HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBare wooden hulls should be sanded thoroughly with 80 grit sandpaper and wiped clean of sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-specialty-tiecoat-metal-marine-primer-for-all-paint-types.html\"\u003e6627 Tie-Coat Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ethinned 25% with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-epoxy-marine-thinner.html\"\u003e97 Epoxy Thinner\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003edirectly to the bare wood. Allow 4 hours to dry.\u003c\/li\u003e\n\u003cli\u003eApply two thinned coats of ECO HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Steel and Cast Iron\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt; remove loose rust and scale from the metal surface.\u003c\/li\u003e\n\u003cli\u003eScrape, sandblast or wire brush to 2-3 mil profile. Immediately clean the surface using a vacuum or fresh air blast.\u003c\/li\u003e\n\u003cli\u003eApply two coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-6980-rustlok-steel-anti-corrosive-marine-primer-79634.html\"\u003ePettit 6980 Rustlok Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efollowed by two to three coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\"\u003ePettit 4700\/4701 High Build Epoxy Primer.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFollow with two thin coats of Pettit HRT ECO.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel, Bronze, Lead, and Non-Aluminum Alloys\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent clean then abrade to clean bright metal by sanding with 60-80 grit sandpaper, sandblasting or wire brushing.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-prop-coat-barnacle-barrier-aerosol\/\"\u003eProp Coat Barnacle Barrier 1792\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin coats of ECO HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor maximum corrosion resistance, sandblast to clean, bright metal and remove blasting residue with clean, dry air or brush.\u003c\/li\u003e\n\u003cli\u003eApply one to two coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-alumaprotect-epoxy-barrier-coat-primer\/\"\u003ePettit 4400\/4401 Aluma Protect Epoxy Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efollowed by two coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\"\u003ePettit Protect High Build Epoxy Primer.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of ECO HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe above system utilizes Aluma Protect to form the most effective barrier over roughed aluminum. Aluma Protect provides maximum resistance to fresh or salt water, eliminating corrosion. Following with Pettit Protect creates an impenetrable shell making this a lifestyle system free of corrosion.\u003c\/p\u003e\n\u003cp\u003eAbove information sourced from Pettit's ECO HRT Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-ECO-HRT-Bottom-Paint-Application-Instructions.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"53\" height=\"51\"\u003e\u003cstrong\u003eClick to Download Pettit ECO HRT Copper Free Antifouling Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098117308550,"sku":"PET-1800G","price":232.13,"currency_code":"USD","in_stock":false},{"title":"Blue \/ Gal","offer_id":43098117341318,"sku":"PET-1200G","price":232.13,"currency_code":"USD","in_stock":false},{"title":"Pontoon Gray \/ Gal","offer_id":43103305007238,"sku":"PET-1300G","price":232.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/ECO_HRT_Copper-Free_Bottom_Paint__40814.jpg?v=1770419140"},{"product_id":"ez-bilge","title":"Pettit EZ Bilge Performance Bilge Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ Bilge Performance Bilge Paint\u003c\/h2\u003e\n\u003cp\u003ePettit's EZ Bilge is a durable high-performance alkyd finish specially formulated to withstand the abuses associated with boat bilges. The hardwearing finish is resistant to antifreeze, grease, gasoline, diesel fuel, and engine oil. Its tough resilient surface will stand up to years of abrasion and wear. EZ-Bilge utilizes a high-solids formula that is easy to apply by brush, roller or spray and provides excellent coverage. Like other Pettit \"EZ\" products, EZ-Bilge provides the simplest way to achieve optimum results with minimum effort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance coating specially designed for boat bilges\u003c\/li\u003e\n\u003cli\u003eSuper tough finish is fuel, oil, and abrasion resistant\u003c\/li\u003e\n\u003cli\u003eHigh covering formula is easy to apply\u003c\/li\u003e\n\u003cli\u003eSuperior protection that withstands tough bilge conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Oil modified alkyd\u003c\/li\u003e\n\u003cli\u003eFinish: High-gloss\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: Bilges\u003c\/li\u003e\n\u003cli\u003eColors Available: 3124 White, 3125 Gray\u003c\/li\u003e\n\u003cli\u003eCoverage: 545 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: 2 minimum\u003c\/li\u003e\n\u003cli\u003eVOC: 388 grams\/liter (max)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePettit Brush Thinner -For brushing and clean up \u003c\/li\u003e\n\u003cli\u003ePettit Spray Thinner -Spraying Application\u003c\/li\u003e\n\u003cli\u003ePettit Bio-Blue - Surface cleaning for bare fiberglass and painted surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit EZ Bilge Paint\u003c\/h2\u003e\n\u003cp\u003ePettit EZ Bilge is a hard-wearing finish that can be applied to properly prepared fiberglass, metal, wood, and over existing metals. The surface must be free of dirt, loose paint, rust, oil, grease, wax, soap, and any other foreign matter. Stir thoroughly before use. EZ Bilge may be applied by brush, roller, conventional or airless spray. For brush or roller application apply without thinning although in hot weather 5 to 10% Pettit #120 Brushing Thinner may be added to maintain a wet edge. For best results on large, smooth surfaces roll out using a short nap roller followed immediately by leveling off with the tip of a brush. For conventional spray application thin 15 to 20% with Pettit 121 Spraying Thinner.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, Roller, or Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.5 mils (3 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 545 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e120 Brushing Thinner or 121 Spraying Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  1-1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  3 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003ctd\u003e  24 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePainted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean painted areas by washing with a solution of two cups household ammonia per gallon of water. Rinse well.\u003c\/li\u003e\n\u003cli\u003eIf the old paint is an oil-based enamel or polyurethane, and is in good condition, sand with 150 grit sand paper.\u003c\/li\u003e\n\u003cli\u003eSolvent clean then apply first coat of EZ Bilge.\u003c\/li\u003e\n\u003cli\u003eIf the old oil-based or polyurethane paint contained a non-skid material, scrub the non-skid surface with Pettit 92 Bio-Blue using a stuff bristle brush.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly and allow surface to dry. Then apply two coats of EZ Bilge.\u003c\/li\u003e\n\u003cli\u003eIf the old paint is latex or water-based, or is in poor condition, remove it with a paint or varnish remover or by sanding.\u003c\/li\u003e\n\u003cli\u003eProceed with the instructions for the appropriate bare surface system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface smooth with 80-120 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eSolvent clean with Pettit 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply coat of 2018 EZ Wood Sealer.\u003c\/li\u003e\n\u003cli\u003eFollow with one or two coats of 6149 EZ Prime until an evenly smooth base condition is reached.\u003c\/li\u003e\n\u003cli\u003eSand each coat with 80-120 grit sandpaper and solvent clean with Pettit 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eProceed with the first coat of EZ Bilge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Steel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSurface must be cleaned to a bright finish.\u003c\/li\u003e\n\u003cli\u003eImmediately apply one coat of 6980 Rustlok Primer. Allow to dry until tacky.\u003c\/li\u003e\n\u003cli\u003eIf surface is rough, apply a coat of 6627 Tie-Coat Primer. Sand well and solvent clean.\u003c\/li\u003e\n\u003cli\u003eRepeat application of Tie-Coat Primer as needed until a smooth base is achieved.\u003c\/li\u003e\n\u003cli\u003eProceed with the first coat of EZ Bilge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Aluminum\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the prep surface using Pettit 92 Bio-Blue Hull Prep and a Scotch-Brite pad.\u003c\/li\u003e\n\u003cli\u003eThoroughly rinse surface and allow to dry.\u003c\/li\u003e\n\u003cli\u003eRemove oxidation and etch the surface with medium grit emery cloth. Remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply one thin \"wet\" coat of 6980 Rustlok. Allow to dry tacky.\u003c\/li\u003e\n\u003cli\u003eProceed with one or two coats of 6149 EZ Prime to smooth the surface.\u003c\/li\u003e\n\u003cli\u003eSand well and solvent clean with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eProceed with first coat of EZ Bilge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThe entire surface to be painted, regardless of age, must be thoroughly washed with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eSand the gel coat with 80 - 120 grit sandpaper to a dull, frosty appearance. Solvent clean to remove residue.\u003c\/li\u003e\n\u003cli\u003eIf the surface is in excellent condition, proceed with the first coat of EZ Bilge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one, thin even coat per day. After an overnight dry, lightly sand with 220 grit sandpaper and apply a second coat.\u003c\/li\u003e\n\u003cli\u003eAlways wipe with a tack cloth immediately before the fresh application of paint to remove any airborne dust.\u003c\/li\u003e\n\u003cli\u003eFor airless spray application thin up to 5% with Pettit 121 Spraying Thinner.\u003c\/li\u003e\n\u003cli\u003eDo not apply EZ Bilge on extremely humid days (90°+ RH) or when rain is threatening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-EZ-Bilge-Application-Sheet.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit-EZ-Bilge-Application-Sheet.pdf?v=1771379531\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eClick to Download Pettit EZ Bilge Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Gray \/ Qt","offer_id":43098117505158,"sku":"PET-3125Q","price":45.7,"currency_code":"USD","in_stock":true},{"title":"White \/ Qt","offer_id":43098117537926,"sku":"PET-3124Q","price":45.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_EZ_Bilge_photo__25807.jpg?v=1771379699"},{"product_id":"ez-cabin-coat","title":"Pettit EZ Cabin Coat - Quart","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003cp\u003e\u003cstrong\u003ePettit EZ Cabin Coat - Quart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePettit's EZ Cabin-Coat is a high performance, water-based paint specially formulated for areas that are prone to moisture. Its durable finish easily withstands the humid, challenging conditions that promote unsightly mildew growth and cause paint failures in cabin interiors.\u003c\/p\u003e\n\u003cp\u003eEZ Cabin-Coat provides a moisture resistant, mildew proof finish that will stay good-looking, bright and color-fast for years. Ideal for high humidity areas such as cabin interiors, heads, lockers, cabinets, drawers and closets, it can be used on all interior surfaces, such as drywall, wood, fiberglass, wood coverings and even tile.\u003c\/p\u003e\n\u003cp\u003eEZ Cabin-Coat provides excellent adhesion to most glossy surfaces without the need for sanding. Like other Pettit \"EZ\" products EZ Cabin-Coat provides the simplest way to achieve optimum results with minimum effort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance coating for surfaces prone to moisture\u003c\/li\u003e\n\u003cli\u003eSuper tough mold and mildew-proof finish\u003c\/li\u003e\n\u003cli\u003eAdheres to any glossy surface without prior sanding\u003c\/li\u003e\n\u003cli\u003eEasy to apply, dries fast with low odor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSatin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e110 sq. ft\/qt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ***\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_EZ_Cabin_Coat.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/How_to_Apply_Pettit_EZ_Cabin_Coat.pdf?v=1771379179\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eHow to Apply\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"White \/ Qt","offer_id":43098110984326,"sku":"PET-3121Q","price":40.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_EZ_Cabin_Coat_photo__20903.jpg?v=1771379228"},{"product_id":"ez-decks","title":"Pettit EZ Decks Non Skid Deck Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ Decks Non Skid Deck Paint\u003c\/h2\u003e\n\u003cp\u003eThe state-of-the-art Pettit EZ Decks non-skid deck paint adds a powerful finish that the weather simply can’t penetrate. It stays durable for years and is very simple to apply. Part of its secret lies within its special grit that produces a durable, slip-resistant finish applicable to all decks and cabin soles. As with other select Pettit “EZ” products, Pettit EZ Decks allows for a seamless way to achieve maximum results with little-to-no effort.\u003c\/p\u003e\n\u003cp\u003eThe durable weather-resistant finish helps to prevent long term abrasions and abuse. Comes loaded with ultraviolet filters to combat fading while offering premium color retention that will stay vibrant for years without cracking like lesser deck finishes. Available in three popular colors that match perfectly with Pettit’s Easypoxy topside enamel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides a super tough non-skid finish\u003c\/li\u003e\n\u003cli\u003eExtremely durable weather-resistant finish\u003c\/li\u003e\n\u003cli\u003eFade and UV resistant, colors hold up under tough conditions\u003c\/li\u003e\n\u003cli\u003eEZ decks is simple to use and easy to apply\u003c\/li\u003e\n\u003cli\u003eSold in Quarts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit Brush Thinner \u003c\/strong\u003e- For brushing and clean up \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit Spray Thinner \u003c\/strong\u003e-For spraying application \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit Bio-Blue\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e- \u003c\/strong\u003eFor preparing bare fiberglass surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2 Minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow To Apply Pettit EZ Decks Non-Skid Paint\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003eStir EZ Decks thoroughly before use, as the non-skid agent in the paint will float to the surface in the container. This paint can be applied by brush or roller; if applying by brush or roller, apply without thinning. If applying in hot weather, 5-10% of Pettit 120 Thinner may be added to maintain a wet edge. For best results on large surfaces, roll out using a short nap or foam roller followed immediately by leveling off with the tip of a brush.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush or roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eNumber of Coats:\u003c\/strong\u003e 2 minimum\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDry Film Thickness per Coat: \u003c\/strong\u003e1.5 mils (2.6 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e120 Brushing Thinner (clean up also)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90°F\u003c\/td\u003e\n\u003ctd\u003e1-1\/2 Hours\u003c\/td\u003e\n\u003ctd\u003e8 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70°F\u003c\/td\u003e\n\u003ctd\u003e3 Hours\u003c\/td\u003e\n\u003ctd\u003e16 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e6 Hours\u003c\/td\u003e\n\u003ctd\u003e24 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface smooth with 80-120 grit sandpaper, then solvent clean with Pettit 120 Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eFill all screw heads or small holes with an epoxy fairing compound; sand flush and solvent clean.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 2018 Clear Sealer to penetrate and seal the porous grain.\u003c\/li\u003e\n\u003cli\u003eFollow with one or  two coats of 6149 Easypoxy White Undercoater until an evenly smooth base condition is reached.\u003c\/li\u003e\n\u003cli\u003eSand each coat with 80-120 grit sandpaper and solvent clean with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eProceed with the first finish coat of EZ Decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Steel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSurface must be cleaned to a bright finish by sandblasting or grinding. Remove blast residue.\u003c\/li\u003e\n\u003cli\u003eImmediately apply one coat of 6980 Rustlok Primer. Allow to dry until tacky.\u003c\/li\u003e\n\u003cli\u003eIf surface is rough, apply a coat of 6627 Tie-Coat Primer. Sand well and solvent clean.\u003c\/li\u003e\n\u003cli\u003eRepeat application as needed until a smooth, uniform base is reached.\u003c\/li\u003e\n\u003cli\u003eProceed with the first coat of EZ Decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Aluminum\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWipe the surface free of oil and grease with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eRemove oxidation and etch the surface with medium grit emery cloth. Remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply one thin \"wet\" coat of 6455\/044 Metal Primer. Allow to dry at least two hours.\u003c\/li\u003e\n\u003cli\u003eProceed with the first coat of EZ Decks.\u003c\/li\u003e\n\u003cli\u003e6149 Easypoxy White Undercoater can be used over the 6455\/044 Metal Primer for smoothing surfaces if desired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThe entire surface being painted must be thoroughly washed with 120 Thinner or 92 Bio-Blue.\u003c\/li\u003e\n\u003cli\u003eSand the gel coat with 80 to 120 grit sandpaper to a dull, frosty appearance. Solvent clean to remove residue.\u003c\/li\u003e\n\u003cli\u003eIf the surface is in excellent condition, proceed with the first finish coat of EZ Decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePainted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean painted areas by washing with a solution of two cups household ammonia per gallon of water and rinse well.\u003c\/li\u003e\n\u003cli\u003eRemove existing mildew with household bleach instead of ammonia.\u003c\/li\u003e\n\u003cli\u003eIf the oil paint is oil-based enamel or polyurethane, and is in good condition, sand it smooth with 150 grit sandpaper. \u003c\/li\u003e\n\u003cli\u003eSolvent clean to remove residue, then proceed with first coat of EZ Decks.\u003c\/li\u003e\n\u003cli\u003eIf the old paint contained a non-skid material, scrub the non-skid service with Pettit #92 Bio-Blue using a stiff bristle brush.\u003c\/li\u003e\n\u003cli\u003eThoroughly rinse the surface and allow to dry.\u003c\/li\u003e\n\u003cli\u003eApply two coats of EZ Decks.\u003c\/li\u003e\n\u003cli\u003eIf old paint is latex or water-based, or is in poor condition, remove it with a paint and varnish remover or by sanding.\u003c\/li\u003e\n\u003cli\u003eProceed with instructions for the appropriate bare surface system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_EZ_Decks_Non-Skid.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/How_to_Apply_Pettit_EZ_Decks_Non-Skid.pdf?v=1771374487\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eClick to Download Pettit EZ Decks Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"White \/ Qt","offer_id":43098111180934,"sku":"PET-3127Q","price":57.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_EZ_Decks_Non_Skid_photo__51022.jpg?v=1771374552"},{"product_id":"ez-poxy-1","title":"Pettit EZ Poxy High Gloss Topside Marine Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit EZ Poxy High Gloss Topside Marine Paint\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003ePettit Easypoxy delivers professional-grade protection for above-waterline boat surfaces with its advanced polyurethane formula. This high-gloss topside paint resists fading, chalking, and UV damage while standing up to saltwater, weather exposure, and general wear. The self-leveling formula applies smoothly by brush, roller, or spray, covering up to 600 square feet per gallon. Available in 34 colors with quart and gallon sizes, it works on properly prepared fiberglass, wood, and metal surfaces. Apply at least two coats between 50°F and 90°F for optimal results and long-lasting durability in harsh marine conditions.\u003c\/p\u003e\n\u003cp\u003eNOTE: Ground-shipped within the Continental U.S. only.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eFeatures\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHigh-Gloss Finish: This high-gloss marine paint creates a stunning finish that resists fading and chalking, providing a durable and sleek aesthetic. Its UV-resistant properties prevent fading even with constant sunlight exposure.\u003c\/li\u003e\n\u003cli\u003eDurable and Weather-Resistant Formula: Pettit topside paint is formulated to withstand the harsh marine environment. Its durability protects against abrasion, scratches, and wear caused by exposure to saltwater, wind, and weather.\u003c\/li\u003e\n\u003cli\u003eEasy Application: Both experienced boaters and beginners can apply Pettit EZ Poxy to achieve a professional finish. Use a brush, roller, or sprayer, and let its self-leveling properties and user-friendly formula achieve stunning results. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eFinish: High-gloss\u003c\/li\u003e\n\u003cli\u003eCoverage: Up to 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: At least two coats minimum\u003c\/li\u003e\n\u003cli\u003eColors: 34 colors available; refer to our Pettit paint color chart\u003c\/li\u003e\n\u003cli\u003ePack Size: Available in one quart for all colors and one gallon for White, Hatteras Off-White and Semi-Gloss White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eAssociated Products\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eTo get the best results, pair your Pettit EZ Poxy with these products:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit 120 Thinner:\u003c\/strong\u003e Use for brushing, rolling, and clean-up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit 121 Thinner: \u003c\/strong\u003eUse for spraying\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit Satin Additive:\u003c\/strong\u003e Achieve a semi-gloss to semi-flat finish that reduces glare on deck surfaces and interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePettit EZ-Prime: \u003c\/strong\u003eBefore applying Pettit topside paint, apply a primer as a base coat, particularly on surfaces that are aged, cracked, checked, pitted, rough, or not fully smooth, to ensure optimal adhesion and a flawless finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eHow To Apply Pettit Easypoxy Topside Paint\u003c\/span\u003e\u003c\/h2\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003ePettit EZ Poxy is best applied in temperatures between 50°F and 90°F, with low humidity and no rain. Avoid painting in direct sunlight or extreme heat, which may affect drying and leveling.\u003c\/li\u003e\n\u003cli\u003ePrepare your surface for paint application. Refer to our “Non-Fiberglass Surface Preparation” guide below.\u003c\/li\u003e\n\u003cli\u003eStir the paint thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eApply a thin, even coat with a brush, roller, or spray, and let it dry overnight.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightly sand with 220 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply a second coat and let it cure for 8 to 24 hours, depending on your area’s temperatures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eApplication Notes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eDry Film Thickness per Coat: 1.5 mils (3 wet mils)\u003c\/li\u003e\n\u003cli\u003eCoverage: 600 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eApplication Temp: 50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003eAvoid applying multiple coats in a single day. Applying excessively thick layers over 4 wet mils can prevent proper drying and produce a soft, under-cured paint film.\u003c\/li\u003e\n\u003cli\u003eAvoid painting on extremely humid days (90°+ RH) or when it’s raining.\u003c\/li\u003e\n\u003cli\u003eAvoid painting outdoors in the late afternoon, as dew can negatively impact the wet paint film and compromise the finish.\u003c\/li\u003e\n\u003cli\u003eIn cooler temperatures, ensure that the air and surface temperatures stay at or above 50°F for at least 8 hours after application to allow proper curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eAlthough thinning Pettit EZ Poxy paint is not recommended for brush or roller applications, up to 10% of Pettit 120 Brushing Thinner can be added in hot weather to help maintain a wet edge. For optimal results on large, smooth surfaces, use a short roller and level it with the tip of a brush.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor traditional spray applications, thin Pettit EZ-Poxy using 15 to 20% of Pettit 121 Spraying Thinner. For airless sprays, use up to 5% and a tip size between 0.11 and 0.15 inches in diameter for proper application.\u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTemp\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTo Recoat\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eTo Launch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e90°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e8 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e70°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e3 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e16 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e50°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e24 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg title=\"pdficon.png\" src=\"https:\/\/lh7-rt.googleusercontent.com\/docsz\/AD_4nXeyVZe_KJUnlG8e_hrIl-1vhFzcNbVkdtesWj6kqFL0KfjQAZJd-F5KGE-02WP64rnzTlp1WjCdGnYHyd0brmhyGAsIscVpw_7IwcHv0XGX0bMbLRO82Gp6evD0UUCOkiGk4gcp?key=cdmlQ1YmmSmNKf5bym2fAF1R\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit-EZ-Poxy-Topside-Paint-Application-Information.pdf?v=1771373960\" target=\"_blank\" rel=\"noopener\"\u003eClick to Download Pettit Easypoxy Application Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eFiberglass Application \u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg src=\"https:\/\/lh7-rt.googleusercontent.com\/docsz\/AD_4nXdfWmKCs_lfvFgYegq63sKG4HOXtr47TgqGeGqbcEJFe8QKe08zfwdoFl2jBWnq5Zn8OidbqvSWQ7wYI2quSnofclQnUwki3sGs2yyClT1HhhOQwsv-fByqrbabL01i2Ql_AYAM?key=cdmlQ1YmmSmNKf5bym2fAF1R\" alt=\"\" width=\"579\" height=\"251\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eNon-Fiberglass Application \u003c\/h3\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eBare Wood\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eSand bare wood with 80 to 120 grit sandpaper until smooth. If the wood has been epoxied, scrub thoroughly with an ammonia\/water solution, sand with 120 grit, and clean with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eUse 7050 EZ-Fair Epoxy Fairing Compound to fill screw heads or small holes. Sand the filled areas flush and clean with the same thinner.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 2018 EZ WoodSealer to seal the porous grain. For epoxied wood, skip the sealer and move directly to priming.\u003c\/li\u003e\n\u003cli\u003eApply one or two coats of 6149 EZ Prime, sanding each coat with 80-120 grit sandpaper and cleaning with Pettit 120 Thinner between coats until a smooth base is achieved.\u003c\/li\u003e\n\u003cli\u003eOnce the primed surface is clean and smooth, proceed with the first coat of Pettit Easypoxy for a durable, high-gloss finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSteel Hulls\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eClean the surface to a bright finish by sandblasting or grinding, then remove any blast residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 6980 Rustlok Primer and let it dry until tacky. For rough surfaces, apply a coat of 6627 Tie-Coat Primer. Sand before cleaning with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eRepeat as needed until smooth, then apply the first coat of Pettit EZ Poxy.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eAluminum\u003c\/h3\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eRemove oil and grease using Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eUse a medium-grit emery cloth to remove oxidation, etch the surface, and then clean off any sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a thin coat of 6455\/044 Metal Primer and let it dry for at least two hours. Optionally, use 6149 EZ Prime for additional smoothing before applying the first coat\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this paint require a primer before application?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, Pettit EZ Poxy requires a primer when applied to bare surfaces such as fiberglass, wood, or metal. Pettit recommends using a compatible primer to ensure proper adhesion and durability.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs Pettit EZ Poxy suitable for fiberglass, wood, or metal surfaces?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, Pettit EZ Poxy is designed for fiberglass, wood, and properly primed metal surfaces. Its versatile formula ensures excellent adhesion and a durable finish on all compatible substrates.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan this paint be applied over existing paint, or must it be removed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePettit EZ Poxy can be applied over existing paint, provided the surface is clean, sanded, and free of loose or peeling material. For the best results, ensure compatibility with the existing paint type.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Bikini Blue \/ Qt","offer_id":43098111967366,"sku":"PET-3229Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Black \/ Qt","offer_id":43098112000134,"sku":"PET-3801Q","price":57.31,"currency_code":"USD","in_stock":true},{"title":"Blue Ice \/ Qt","offer_id":43098112032902,"sku":"PET-3213Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Bright Red \/ Qt","offer_id":43098112065670,"sku":"PET-3624Q","price":67.55,"currency_code":"USD","in_stock":true},{"title":"Burgundy \/ Qt","offer_id":43098112098438,"sku":"PET-3626Q","price":67.55,"currency_code":"USD","in_stock":true},{"title":"Dull Dead Grass \/ Qt","offer_id":43098112131206,"sku":"PET-3303Q","price":39.35,"currency_code":"USD","in_stock":true},{"title":"Electric Blue \/ Qt","offer_id":43098112163974,"sku":"PET-3237Q","price":60.72,"currency_code":"USD","in_stock":false},{"title":"Fight Lady Yellow \/ Qt","offer_id":43098112196742,"sku":"PET-3456Q","price":57.98,"currency_code":"USD","in_stock":true},{"title":"Grand Bank Beige \/ Qt","offer_id":43098112229510,"sku":"PET-3520Q","price":57.98,"currency_code":"USD","in_stock":true},{"title":"Hatteras Cream \/ Qt","offer_id":43098112262278,"sku":"PET-3208Q","price":60.03,"currency_code":"USD","in_stock":true},{"title":"Hatteras White \/ Qt","offer_id":43098112295046,"sku":"PET-3108Q","price":57.98,"currency_code":"USD","in_stock":true},{"title":"Hatteras White \/ Gal","offer_id":43098112327814,"sku":"PET-3108G","price":163.84,"currency_code":"USD","in_stock":true},{"title":"Jade Green \/ Qt","offer_id":43098112360582,"sku":"PET-3348Q","price":56.62,"currency_code":"USD","in_stock":true},{"title":"Kelly Green \/ Qt","offer_id":43098112393350,"sku":"PET-3350Q","price":57.98,"currency_code":"USD","in_stock":false},{"title":"Ocean Blue \/ Qt","offer_id":43098112426118,"sku":"PET-3248Q","price":59.35,"currency_code":"USD","in_stock":true},{"title":"Platinum \/ Qt","offer_id":43098112458886,"sku":"PET-3711Q","price":62.09,"currency_code":"USD","in_stock":true},{"title":"Sandtone \/ Qt","offer_id":43098112491654,"sku":"PET-3518Q","price":57.98,"currency_code":"USD","in_stock":false},{"title":"Seafoam Green \/ Qt","offer_id":43098112524422,"sku":"PET-3333Q","price":55.26,"currency_code":"USD","in_stock":true},{"title":"Seattle Gray \/ Qt","offer_id":43098112557190,"sku":"PET-3715Q","price":57.98,"currency_code":"USD","in_stock":true},{"title":"Steel Gray \/ Qt","offer_id":43098112589958,"sku":"PET-3720Q","price":55.94,"currency_code":"USD","in_stock":false},{"title":"White \/ Qt","offer_id":43098112622726,"sku":"PET-3175Q","price":57.98,"currency_code":"USD","in_stock":false},{"title":"White \/ Gal","offer_id":43098112655494,"sku":"PET-3175G","price":153.6,"currency_code":"USD","in_stock":false},{"title":"Semi-Gloss White \/ Gal","offer_id":43124442857606,"sku":"PET-3106G","price":154.97,"currency_code":"USD","in_stock":false},{"title":"Semi-Gloss White \/ Qt","offer_id":43124442890374,"sku":"PET-3106Q","price":55.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Easypoxy_High_Gloss_Topside_Marine_Paint__63706_6585d403-31c8-4fbf-9d1f-d3fce43021ba.jpg?v=1771373717"},{"product_id":"fbglas-btmkote-aqua","title":"Interlux Fiberglass Bottomkote Aqua Antifouling Boat Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eInterlux Fiberglass Bottomkote Aqua Antifouling Boat Bottom Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-0dceaf65-7fff-a24f-395c-f6aa4c5f432b\"\u003e\u003cstrong\u003eFor a tough, eco-friendly antifouling solution, you can't beat Interlux Fiberglass Bottomkote\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e – it delivers excellent protection with a smooth, durable finish\u003c\/strong\u003e.\u003c\/span\u003e\u003cspan\u003e This water-based formula resists barnacles and algae while providing fast-drying, low-odor application – perfect for DIY boaters. It's easy to clean up with soap and water and adheres well to fiberglass hulls, ensuring long-lasting performance in both saltwater and freshwater. \u003c\/span\u003e\u003cspan\u003eInterlux Fiberglass Bottomkote\u003c\/span\u003e\u003cspan\u003e has a hard, fast-drying finish that minimizes paint buildup, making future maintenance a breeze. Available in blue or black, it's an ideal choice for boaters looking for reliable antifouling without the harsh solvents.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid protection against all types of fouling, including zebra muscles\u003c\/li\u003e\n\u003cli\u003eColorfast durable finish\u003c\/li\u003e\n\u003cli\u003eReduced emissions, low odor\u003c\/li\u003e\n\u003cli\u003eEasy clean up with soap and water\u003c\/li\u003e\n\u003cli\u003eThinner film, less paint build-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eOnly thin if necessary, and if so, do not thin more than 10% by volume. Thin with water.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2-3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterlux Fiberglass Solvent Wash 202\u003c\/strong\u003e-To clean bare fiberglass prior to application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterlux Fiberglass Surface Prep YMA601\u003c\/strong\u003e-Water Base cleaner for bare fiberglass. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterlux Watertite YAV135\u003c\/strong\u003e-Epoxy Filler for filling and fairing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e ------------------------------------------------------------------------------------------------------------------\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"tab_label classyunicodedone\"\u003eHow To Apply\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION DATA METHOD\u003c\/strong\u003e: Brush, Conventional Spray, Roller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2-3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDRY FILM THICKNESS PER COAT: \u003c\/strong\u003e2 mils (5.4 wet mils)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e400 sq. ft\/gal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION TEMP:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e40°F Min. \/ 95°F Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHINNER:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eWater\u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Touch\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003ctd\u003eTo Launch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e5 HR\u003c\/td\u003e\n\u003ctd\u003e8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePREVIOUSLY PAINTED SURFACES:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIn Good Condition Remove old flaking paint. Wet sand with 80 grade (grit) paper. Rinse with fresh water and allow to dry. In Poor Condition Remove antifouling paint in poor condition with Interstrip 299E.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eScrub the surface thoroughly with soap and water using a stiff brush. Apply Fiberglass Surface Prep YMA601V with a 3\/8\"\" nap roller on surface to be de-waxed, work in 10x10 foot areas. Ensure YMA601V is removed before drying. Scrub Fiberglass Surface Prep YMA601V using a 3M Doodlebug™ and a brown Scotch-Brite® pad. Once all areas have been thoroughly scrubbed, use wet rags or spray down with high pressure rinse to remove all traces of Fiberglass Surface Prep YMA601V. Change rags frequently. Wipe down with clean cloths. Repeat the cleaning process until water no longer beads. Surface must be clean and dry prior to application of Fiberglass Bottomkote® Aqua.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS - NO SAND:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePrepare surface as described above. Apply the Fiberglass Bottomkote®  Aqua within 4 hours of cleaning. If this time is exceeded, rinse with fresh water and allow to dry. If exceeding 2 months between de-waxing and painting, repeat cleaning prior to application of Fiberglass Bottomkote® Aqua.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE WOOD:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eClean with Special Thinner 216. Sand with 80 grade (grit) paper. Clean with Special Thinner 216. Repair any defects with Watertite Epoxy Filler. Lightly sand and wipe clean. Surface must be free from all contamination. Fill seams, if necessary, with Seam Compound Brown 30. Apply first coat of Fiberglass Bottomkote® Aqua thinned with clean water (do not add more than 10% by volume).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUNDERWATER METALS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAll substrates must be primed, clean and dry. All preparation for bare substrates is covered on the appropriate primer labels. Contact Interlux® for further details.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDo not apply thin coats. If during application the brush pulls or the roller drags, add small increments of water to improve handling (do not add more than 10% by volume). Apply 2 coats for full protection. BARE WOOD: Apply 3 coats of Fiberglass Bottomkote® Aqua. Fiberglass Bottomkote® Aqua can be applied to most popular antifouling paints as long as the old coating has been aged, is tightly adhered and is in sound condition. Do not apply Fiberglass Bottomkote® Aqua over soft or tin-based copolymer antifoulings. Do not use on aluminum.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Fiberglass_Bottomkote_Aqua_Technical_Data.pdf\"\u003e \u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"50\" height=\"48\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Fiberglass_Bottomkote_Aqua_Technical_Data.pdf?v=1771352871\"\u003eClick here to download Interlux Fiberglass Bottomkote Aqua Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Interlux Paint","offers":[{"title":"Blk \/ Gal","offer_id":43098114326662,"sku":"ILX-YBA579G","price":202.89,"currency_code":"USD","in_stock":true},{"title":"Blk \/ Qt","offer_id":43098114359430,"sku":"ILX-YBA579Q","price":73.83,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098114392198,"sku":"ILX-YBA569G","price":202.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/interlux_fiberglass_bottomkote_aqua__19497.jpg?v=1771352913"},{"product_id":"fiberglass-bottomkote-nt","title":"Interlux Fiberglass Bottomkote NT","description":"\u003ch2 class=\"classyunicodedone\"\u003e\n\u003cstrong\u003eInterlux Fiberglass Bottomkote NT\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eAntifouling Marine Paint\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-5f1ba9b9-7fff-b342-f123-94dc64fbd4ef\"\u003e\u003cstrong\u003eGet the best of both worlds with Interlux Fiberglass Bottomkote NT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e, a hybrid antifouling paint that combines the durability of a hard coating with the benefits of a slow-polishing ablative formula\u003c\/strong\u003e. \u003c\/span\u003e\u003cspan\u003eMade for long-lasting protection, Interlux Fiberglass Bottomkote reduces paint buildup while maintaining a smooth, fuel-efficient hull. It's ideal for saltwater and freshwater applications, offering excellent coverage and adhesion to fiberglass surfaces. Its innovative technology ensures consistent performance throughout the season, making it a go-to choice for boaters seeking reliable antifouling protection with minimal maintenance. \u003c\/span\u003e\u003cspan\u003eChoose from red, green, blue, or black.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual resin formulation combines and optimizes the benefits of hard and ablative paints.\u003c\/li\u003e\n\u003cli\u003eSurface continuously smooths with use, thereby providing a fast, fuel efficient coating\u003c\/li\u003e\n\u003cli\u003eFast drying - paint and launch on the same day\u003c\/li\u003e\n\u003cli\u003eUniversal, Interlux Fiberglass Bottomkote NT is a cost-effective choice for all power and sail boats in all waters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e400 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e2 minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e449 g\/lt - maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e1 US Quart, 1 US Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYBB349 Red, YBB359 Green, YBB369 Blue, YBB379 Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ecuprous oxide:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e25%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003e\u003cstrong\u003eSpecial Thinner 216\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For thinning or surface prep\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-brush-ease-marine-paint-flow-enhancer.html\"\u003e\u003cstrong\u003eBrush-Ease 433\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For thinning or surface prep\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-interprotect-2000e-epoxy-marine-barrier-coat-kit-79094.html\"\u003e\u003cstrong\u003eInterProtect 2000E\u003c\/strong\u003e\u003c\/a\u003e- Universal primer for above \u0026amp; below waterline\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003e\u003cspan lang=\"EN\"\u003eHow to Apply Interlux Fiberglass Bottomkote NT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eApply Interlux Fiberglass Bottomkote NT over existing antifouling paints provided the old coating is tightly adhered and is undamaged. Use Fiberglass Bottomkote NT on fiberglass, wood, or properly primed steel and lead. Unsuitable for use on tin-based copolymer antifouling paints. Use a minimum of 2 coats. Shake\/stir paint thoroughly prior to applying.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods\u003c\/strong\u003e: Roller, Brush, Airless Spray, or Conventional Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 mils (4.1 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e400 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 95°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSpecial Thinner 216 or Brush-Ease 433\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"98\"\u003e\n\u003cp align=\"center\"\u003eTemp\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"178\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"186\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"98\"\u003e\n\u003cp align=\"center\"\u003e95°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp align=\"center\"\u003e1\/2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"178\"\u003e\n\u003cp align=\"center\"\u003e1 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"186\"\u003e\n\u003cp align=\"center\"\u003e3 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"98\"\u003e\n\u003cp align=\"center\"\u003e75°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp align=\"center\"\u003e1 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"178\"\u003e\n\u003cp align=\"center\"\u003e2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"186\"\u003e\n\u003cp align=\"center\"\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"98\"\u003e\n\u003cp align=\"center\"\u003e60°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp align=\"center\"\u003e2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"178\"\u003e\n\u003cp align=\"center\"\u003e4 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"186\"\u003e\n\u003cp align=\"center\"\u003e10 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation \u0026amp; Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces (Good Condition)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRefer to the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Interlux-Antifouling-Compatibility-Chart.pdf\"\u003eInterlux Antifouling Compatibility Chart\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand prepare the surface as required.\u003c\/li\u003e\n\u003cli\u003eApply at least 2 coats of Fiberglass Bottomkote NT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces (Poor Condition)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely remove all old antifouling paint using Interstrip 299E for fiberglass and wood.\u003c\/li\u003e\n\u003cli\u003eFor steel, sandblast to near white metal.\u003c\/li\u003e\n\u003cli\u003eFollow the appropriate application systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove mold release wax and other contaminants to ensure that the antifouling paint properly adheres to the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove mold release wax using either\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-fiberglass-marine-surface-prep-mold-release-remover-79097.html\"\u003eFiberglass Surface Prep YMA601V\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-fiberglass-solvent-boat-wash-wax-remover.html\"\u003eFiberglass Solvent Wash 202\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFill any surface imperfections with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-watertite-2-part-epoxy-marine-filler-compound-38170.html\"\u003eInterlux Watertite YAV135\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eAfter the surface has been cleaned, follow one of the Fiberglass application systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - No Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-fiberglass-marine-surface-prep-mold-release-remover-79097.html\"\u003eFiberglass Surface Prep YMA601V\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eApply one coat of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-interprotect-2000e-epoxy-marine-barrier-coat-kit-79094.html\"\u003eInterlux InterProtect 2000E\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand the entire surface well with 80 grit paper until flat matte finish is obtained.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Interlux Bottomkote NT allowing appropriate drying times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grit paper, then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply the first coat of Interlux Fiberglass Bottomkote NT thinned by 10% with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eSpecial Thinner 216\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-brush-ease-marine-paint-flow-enhancer.html\"\u003eBrush-Ease 433\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFill seams with Interlux Seam Compound 30 (if necessary)\/\u003c\/li\u003e\n\u003cli\u003eApply 2 or more coats of Interlux Fiberglass Bottomkote NT unthinned, allowing for appropriate dry times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThin only if necessary and do not thin more than 10%.\u003c\/li\u003e\n\u003cli\u003eFor airless spray, use tip size 0.53-0.66 mm\/21-26 thou. Use pressure 170-204 bar\/2500-3000 psi.\u003c\/li\u003e\n\u003cli\u003eFor conventional spray, use pressure pot tip size 1.8-2.2 mm\/70-85 thousand. Use pressure 4.08-4.76 bar\/60-70 psi (gun pressure), 10-15 psi (pot pressure).\u003c\/li\u003e\n\u003cli\u003eFor roller application, use a 3\/8\" nap solvent resistant roller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Fiberglass_Bottomkote_NT_Data_Data_Sheet.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"42\" height=\"40\"\u003e\u003c\/strong\u003e\u003cstrong\u003eClick Here to Download Interlux Fiberglass Bottomkote NT Datasheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Gal","offer_id":43098114785414,"sku":"ILX-YBB-379G","price":138.83,"currency_code":"USD","in_stock":true},{"title":"Black \/ Qt","offer_id":43098114818182,"sku":"ILX-YBB-379Q","price":50.02,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098114850950,"sku":"ILX-YBB-369Q","price":50.02,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098114883718,"sku":"ILX-YBB-369G","price":138.83,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098114916486,"sku":"ILX-YBB-359G","price":138.83,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098114949254,"sku":"ILX-YBB-349G","price":138.83,"currency_code":"USD","in_stock":true},{"title":"Red \/ Qt","offer_id":43098114982022,"sku":"ILX-YBB-349Q","price":50.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/interlux_fiberglass_bottomkote_NT_photo__36037.jpg?v=1770152166"},{"product_id":"flattening-agent-1-part-finishes","title":"Interlux Flattening Agent for 1 Part Finishes","description":"\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eInterlux Flattening Agent for 1 Part Finishes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA Flattening Agent specially formulated for mixing with Interlux one-part finishes (Brightside Polurethane and Yacht Enamels) and varnishes (Schooner Gold, Original, Goldspar and Schooner) to produce a variety of gloss, satin or matte effect finishes. For interior and exterior use.\u003c\/p\u003e\n\u003cp\u003eThe addition of Flattening Agent to a finish or varnish will not affect the drying or overcoating characteristics of the product. It will not affect the durability of the finished surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAdd Flattening Agent to final coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInterlux Special Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf required, thin 5% with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eInterlux Special Thinner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParts Finish or Varnish\u003c\/td\u003e\n\u003ctd\u003e Parts Flattening Agent\u003c\/td\u003e\n\u003ctd\u003e Gloss Range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 \u003c\/td\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003ctd\u003e High Semi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003ctd\u003eSemi-Gloss \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003ctd\u003e2 \u003c\/td\u003e\n\u003ctd\u003e Low Semi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 \u003c\/td\u003e\n\u003ctd\u003e3 \u003c\/td\u003e\n\u003ctd\u003e Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"tab_label classyunicodedone\"\u003eHow To Apply\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION DATA METHOD\u003c\/strong\u003e: Brush, Conventional Spray, Roller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eVariable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThin 5% with Special Thinner 216 if required. The addition of Flattening Agent YMA715 to a finish or varnish will not affect the drying or overcoating characteristics of the product. It will not affect the durability of the finished surface. As with all the types of reducedgloss coatings, the resulting finish will not have the same stay-clean properties as a full-gloss coating. If all the mixed (matted) material is not used it may be used at a later date. Simply stir well before use. The level of gloss will decrease where the amount of Flattening Agent YMA715 is increased. The opacity (ability to hide) of the chosen finish will be affected once the clear Flattening Agent YMA715 is added. For better hide apply the unflattened finish first and finish off with the mixed (flattened) material as a last coat, or apply the unflattened finish until opacity is achieved. Stir well before use. If all of the mixed material is not used it may be saved and used at a later date. Product temperature should be minimum 15°C\/60°F and maximum 30°C\/86°F. Ambient temperature should be minimum 5° C\/41°F and maximum 35°C\/95°F. Substrate temperature should be minimum 5°C\/41°F and maximum 35°C\/95°F.\u003c\/p\u003e\n\u003cp\u003eFollow the surface preparation instructions shown on the label of the finish or varnish to which the Flattening Agent is being added. Mixing Details - Typical Gloss Reduction using Flattening Agent YMA715 Parts Finish or Varnish :\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParts Flattening Agent : Gloss Range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 : 1 : High Semi-Gloss\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 : 1 : Semi-Gloss\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 : 2 : Low Semi-Gloss\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 : 3 : Flat\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOnly suitable for use with 1-part finishes or varnishes.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Flattening_Agent_for_1-Part_Finishes.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Flattening_Agent_for_1-Part_Finishes.pdf\"\u003eHow to Apply\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/YMA715_Flattening_Agent_Part1_MSDS.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"41\" height=\"39\"\u003eMSDS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":43098115408006,"sku":"ILX-YMA715","price":50.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/ilx-yma-715_lg__10797.jpg?v=1770152052"},{"product_id":"high-gloss","title":"Interlux High Gloss Yacht Enamel - White","description":"\u003cp\u003e\u003cstrong\u003eInterlux High Gloss White Yacht Enamel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterlux Yacht Enamel is a fast drying, high quality topside finish. It has excellent adhesion to properly prepared surfaces and superior hiding characteristics. Easy to apply by brush, roller, conventional spray and airless spray. Interlux Yacht Enamel is ideal for use above the true waterline for hullsides, decks, boottops and fasion stripes. Bright, high gloss finish allows the natural beauty of wood to show through.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreat color and gloss retention\u003c\/li\u003e\n\u003cli\u003eTraditional alkyd-based marine enamel\u003c\/li\u003e\n\u003cli\u003eBright, high gloss finish\u003c\/li\u003e\n\u003cli\u003eExcellent flow and leveling properties\u003c\/li\u003e\n\u003cli\u003eSold in quarts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e550 ft²\/gal. by brush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2-3 minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eThinners:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-marine-brushing-thinner-quart.html\"\u003eInterlux Brush Thinner:\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eThinning for brush application \u0026amp; clean-up\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eInterlux Special Thinner:\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eThinning for spray application \u0026amp; clean-up\u003c\/p\u003e\n\u003cp\u003eIt is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"tab_label classyunicodedone\"\u003eHow To Apply\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION METHOD\u003c\/strong\u003e: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2-3 minimum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDRY FILM THICKNESS PER COAT: \u003c\/strong\u003e2 mils (3.6 wet mils)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e550 sq. ft\/gal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION TEMP:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 95°F Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHINNER:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush - Brushing Liquid 333. Spray - Special Thinner 216.\u003c\/p\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Touch\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIn Good Condition Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water and allow to dry. Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned. Sand with 180 grade (grit) paper. Remove sanding residue. In Poor Condition Clean as above. Sand with 80 grade (grit) paper. Apply White Undercoater 279.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE WOOD:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSand surface, wipe clean. Apply White Undercoater 279. Sand surface, wipe clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEL HULLS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSandblast or grind, remove sanding residue. Immediately apply a self-etching primer. Allow to dry for 1-24 hours. Apply one coat of Epoxy Barrier-Kote 404\/414.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eApply 2-3 coats of Yacht Enamel* following the proper dry times. Sand between coats using 220-320 grade (grit) paper. Remove sanding residue with a rag dampened with Brushing Liquid 333. Yacht Enamel* may be applied by roller and brush using the roll and tip method. It is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss. Airless Spray Pressure: 170 bar\/2500 psi. Tip Size: 0.33-0.41 mm\/13-16 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 8-10 psi (pot pressure). Tip Size: 0.89-1.4 mm\/35-50 thou. Siphon Cup: Pressure: 3.44-4.47 bar\/50-65 psi - gun pressure. Tip Size: 1.5-1.8 mm\/60-70 thou.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Premium_Yacht_Enamel.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Premium_Yacht_Enamel.pdf\"\u003eHow to Apply\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"White \/ Gal","offer_id":43098116489350,"sku":"ILX-1Q","price":38.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/premium-yacht-enamel__97800.jpg?v=1770151970"},{"product_id":"hydrocoat-eco","title":"Pettit Hydrocoat Eco Ablative Antifouling Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Hydrocoat Eco Ablative Antifouling Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-e26b3029-7fff-27be-9c74-469a082a38b2\"\u003e\u003cstrong\u003eGo green without sacrificing performance with Pettit Hydrocoat Eco, a copper-free antifouling paint formulated for superior multi-season protection.\u003c\/strong\u003e\u003cspan\u003e Using advanced Econea biocide technology, this water-based ablative formula effectively prevents marine growth while reducing environmental impact. Its self-polishing action minimizes paint buildup, ensuring a smooth, fuel-efficient hull. Perfect for boats in both saltwater and freshwater, it applies easily and cleans up with just soap and water. Hydrocoat Eco is the ideal choice for eco-conscious boaters seeking reliable antifouling performance. \u003c\/span\u003e\u003cspan\u003eAvailable in white, blue, black, or brown.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePettit’s hydrocoat formula has been leading the way in marine ablative technology for 20 years.  These water-based paints are industry leaders, and the Pettit Hydrocoat Eco is the newest breakthrough in ablative antifouling paints. It is formulated with the newest, groundbreaking water-based copolymer formula.\u003c\/p\u003e\n\u003cp\u003ePettit Hydrocoat Eco uses Pettit’s exclusive organic biocide formula - Econea. This copper and metal-free biocide bottom paint is raising the bar in ablative antifouling paints. The Pettit Hydrocoat Eco provides multi-season protection against the harshest of conditions. The paint film slowly wears away with use and is effective in and out of the water.  The Pettit Hydrocoat Eco is a tough slime-fighting inhibitor that is a great choice for jet drives, outdrives, and outboard motors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy application and cleanup with soap \u0026amp; water\u003c\/li\u003e\n\u003cli\u003eWater-based,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecopper-free\u003c\/strong\u003e, self-polishing ablative antifouling paint\u003c\/li\u003e\n\u003cli\u003eCo-polymer ablative technology eliminates sanding and paint build-up\u003c\/li\u003e\n\u003cli\u003eDual-biocides provide outstanding multi-season protection in all conditions\u003c\/li\u003e\n\u003cli\u003eUses the power of organic ECONEA™ for better protection and a greener earth\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eBiocide: 6.0% ECONEA\u003c\/li\u003e\n\u003cli\u003eAdditives: 4.8% Zinc Pyrithione\u003c\/li\u003e\n\u003cli\u003eCoverage: 430sq.ft.\/gal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eHydrocoat ECO is comparable to Interlux Micron CF and Pettit Ultima Eco\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Hydrocoat Eco Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Hydrocoat Eco paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Hydrocoat ECO Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Hydrocoat ECO Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Hydrocoat Eco provides. (430 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Hydrocoat Eco has a coverage of 430 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Hydrocoat Eco Antifouling Paint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 minimum with additional coat at waterline recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness per Coat:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.4 mils (4.0 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50° F. Min. \/ 90°F. Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e\u003ccol span=\"4\" width=\"64\"\u003e\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" colspan=\"4\" width=\"256\" height=\"20\"\u003e\u003cstrong\u003eDry Time* (HOURS)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003e90°\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e1\/4 HR\u003c\/td\u003e\n\u003ctd\u003e1.5 HR\u003c\/td\u003e\n\u003ctd\u003e12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003e70°\u003c\/td\u003e\n\u003ctd\u003e1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003e50°\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e48 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo paint old, hard antifoulings, thoroughly wipe down the surface with 120 Brushing Thinner, pying particular attention to waterline areas, then sand painted surface with 80 grit sandpaper. Wipe clean of sanding residue with water and apply hydrocoat Eco. Old tin or copper copolymers or Teflon based antifoulings should be sanded thoroughly with 80 grit sandpaper to remove the chalky outer surface, wiped clean of sanding residue, and then may be over coated directly with Hydrocoat Eco. Traditional, soft antifoulings should be removed before applying Hydrocoat Eco.*The above dry times are minimums. Hydrocoat Eco may be recoated after the minimum time shown. There is no maximum dry time before launching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer or 120 Brushing Thinner. Sand thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash the sanded surface with 120 Brushing Thinner to remove sanding residue. Then apply two or three coats of Hydrocoat Eco, following application instructions. Careful observation of the above instructions will help ensure long term adhesion of this and subsequent years’ antifouling paint.\u003c\/p\u003e\n\u003cp\u003eTo eliminate the sanding operation, prep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit 95 Dewaxer only. Then apply one thin coat of Pettit 6998 Skip-Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three coats of Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003eEasy 2-Step Sandless Method - Thoroughly clean and prep hull using 92 Bio-Blue and a Scotch-brite pad as described above. Make sure that the entire surface has a dull, frosty finish. Wipe surface to remove any excess moisture and apply two coats of Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBarrier Coat:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFiberglass bottoms potentially can form osmotic blisters within the gelcoat and into the laminate. To render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method) then apply three coats of Pettit Protect 4700\/4701 High Build Epoxy Primer per label directions. Apply two or three finish coats of Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlistered Fiberglass:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSee Pettit Technical Bulletin TB-1000 Gelcoat Blister Repair and Prevention Specification for detailed instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare Aluminum:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSandblast to clean, bright metal and remove blasting residue with clean, dry compressed air or a clean brush. Immediately apply three coats of Pettit 4400\/4401 Aluma Protect Epoxy Primer followed by two finish coats of this product. Read and follow carefully the instructions on the Pettit 4400\/4401 Aluma Protect Epoxy Primer label. If the surface to be painted is smooth aluminum, apply one coat of 6455\/044 Metal Primer and allow to dry for 2 hours, then apply two finish coats of this product. Read and follow carefully the instructions for application and top-coating on the 6455\/044 primer label.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSand entire surface with 80 grit paper; wash clean with 120 Brushing Thinner. Apply a coat of Hydrocoat Eco thinned 25% with water, allow an overnight dry, lightly sand and wipe clean. Apply two finish coats of Hydrocoat Eco. Any metal parts must be primed before applying the bottom paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Hulls:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo remove loose rust and scale from the metal surface, scrape, sandblast or wire brush. Solvent clean the surface to remove grease and dirt then apply one or two coats of Pettit 6980 Rustlok* followed by two coats of Pettit 4700\/4701 High Build Epoxy Primer. Follow with Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnderwater Metal Parts:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAbrade to clean bright metal by scraping, sandblasting or wire brushing. Solvent clean and apply one thin coat of Pettit 6455\/044 Metal Primer*. Let dry two hours and apply two coats of Pettit 6627 Tie Coat Primer*. Let the second coat of 6627 Tie-Coat Primer dry at least four hours and apply Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*These are simplified systems for small areas. Please consult your Pettit representative or the Pettit Technical Department for more complex, professional systems. Always read the labels or tech sheets for all products specified herein before using.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Hydrocoat_ECO.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Hydrocoat_ECO.pdf\"\u003eClick to Download Pettit Hydrocoat Eco Antifouling Paint Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098116784262,"sku":"PET-1804G","price":393.31,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098116817030,"sku":"PET-1204G","price":393.31,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098116849798,"sku":"PET-1604G","price":393.31,"currency_code":"USD","in_stock":true},{"title":"White \/ Gal","offer_id":43098116882566,"sku":"PET-1104G","price":393.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Hydrocoat_Eco_Ablative_Antifouling_Paint__35743.jpg?v=1770151845"},{"product_id":"hydrocoat","title":"Pettit Hydrocoat Ablative Antifouling Paint","description":"\u003ch3 class=\"classyunicodedone\"\u003e\u003cstrong\u003e$25 Rebate Per Gallon on Pettit Hydrocoat\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e– Valid through May 31 (Limit 2 gallons per customer). \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/pettit-protect-your-adventure-rebate-tear-tab-2026.pdf?v=1772221726\" target=\"_blank\" title=\"Pettit Rebate Form\" rel=\"noopener\"\u003eDownload Rebate Form\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003ePettit Hydrocoat Antifouling Bottom Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eProtect your hull with Pettit Hydrocoat, an eco-friendly, water-based paint that delivers multi-season antifouling protection.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eThis ablative formula wears away gradually, preventing paint buildup while continuously exposing fresh biocide for long-lasting defense against marine growth. Ideal for use in saltwater and freshwater, Hydrocoat bottom paint applies smoothly with easy soap-and-water cleanup. With its low-VOC composition and durable finish, \u003c\/span\u003e\u003cspan\u003ePettit Hydrocoat\u003c\/span\u003e\u003cspan\u003e is a top choice for boaters seeking reliable antifouling without the harsh solvents. \u003c\/span\u003e\u003cspan\u003eAvailable in blue or black\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePettit Hydrocoat is an eco-friendly water-based marine bottom paint that meets all local and state regulations. It is formulated with no harsh smells or solvents. The Pettit Hydrocoat Antifouling Bottom Paint is the industry leader in water-based ablative antifouling paints. It is formulated to be self-polishing and no pre-sanding is required. Pettit Hydrocoat helps protect bottoms from frequent cleaning, bleaching, trailering, and launching that can wear down boat finishes.\u003c\/p\u003e\n\u003cp\u003ePettit Hydrocoat Antifouling Bottom Paint comes in blue and black color options and is sold by the gallon. Its water-based formula makes it easy to apply with a brush or roller, and clean-up is easy with just soap and water. Use on aluminum hulls or outdrives is not recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-polishing\u003c\/li\u003e\n\u003cli\u003e40% Cuprous Oxide\u003c\/li\u003e\n\u003cli\u003eCopolymer Ablative technology\u003c\/li\u003e\n\u003cli\u003ePTFE for a slick fast finish\u003c\/li\u003e\n\u003cli\u003eMulti-season Ablative\u003c\/li\u003e\n\u003cli\u003eMinimal Odor, Easy Clean-up with Water\u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly\u003c\/li\u003e\n\u003cli\u003eComparable to Interlux Micron CSC, and Pettit Horizons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Water-based ablative\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: 1240 Blue, 1840 Black\u003c\/li\u003e\n\u003cli\u003eDrying Time: To overcoat 3hrs; To launch; 6hrs. @ 70°F\u003c\/li\u003e\n\u003cli\u003eNumber of Coats Recommended: 2-3\u003c\/li\u003e\n\u003cli\u003eCoverage: 490 ft2\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 150 grams\/liter\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 40.43%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\"\u003ePettit Protect Epoxy Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Primer for bare fiberglass applications\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\"\u003ePettit 120 Thinner\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e- For surface prep\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow Much Pettit Hydrocoat Waterbased Bottom Paint Do I Need for My Boat?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Hydrocoat paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e \u003cimg class=\"__mce_add_custom__\" title=\"pettit-hydrocoat-how-many-coats.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-hydrocoat-how-many-coats.jpg\" alt=\"pettit-hydrocoat-how-many-coats.jpg\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col type=\"1\" start=\"1\"\u003e\n\u003col type=\"1\" start=\"1\"\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Hydrocoat provides. (490 square feet per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Hydrocoat has a coverage of 490 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow To Apply Pettit Hydrocoat Antifouling Bottom Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePettit Hydrocoat is easily applied using a brush, roller, or sprayer. For rollers, use a high-quality short nap (maximum 3\/16\" nap) roller cover. Apply using thin coats, as over-application will cause surface imperfections and shorter wear. Before applying, mix the paint thoroughly. Clean and properly prepare surfaces prior to painting. TIP: For the smoothest possible finish: thin the paint 5-10% with clean fresh water. Wet the surface with fresh water. This will provide a truer color and smoother finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods\u003c\/strong\u003e: Brush, Roller, Airless or Conventional Spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 minimum with an additional coat at the waterline recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1.5 mils (3.75 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e490 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eClean, fresh water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"104\"\u003e\n\u003cp\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"175\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"183\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"104\"\u003e\n\u003cp\u003e90°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp\u003e1\/4 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"175\"\u003e\n\u003cp\u003e1-1\/2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"183\"\u003e\n\u003cp\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"104\"\u003e\n\u003cp\u003e70°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp\u003e1\/2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"175\"\u003e\n\u003cp\u003e3 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"183\"\u003e\n\u003cp\u003e10 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"104\"\u003e\n\u003cp\u003e50°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp\u003e1 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"175\"\u003e\n\u003cp\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"183\"\u003e\n\u003cp\u003e16 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*The above dry times are minimums. Hydrocoat may be recoated after the minimum time shown. There is no maximum dry time before launching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf the previous coating is in good condition, thoroughly sand with 80-grit sandpaper then solvent clean with Pettit 120 Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003cli\u003eIf the previous coating is soft or in poor condition, remove it to the bare surface by sanding or using paint remover.\u003c\/li\u003e\n\u003cli\u003eProceed with an appropriate bare system as described below.\u003c\/li\u003e\n\u003cli\u003eOld tin or copper copolymers or Teflon-based antifoulings should be sanded thoroughly with 80-grit sandpaper to remove the chalky outer surface.\u003c\/li\u003e\n\u003cli\u003eWipe clean of sanding residue, then over-coat directly with Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAll fiberglass, regardless of age, should be thoroughly cleaned with Pettit 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D95 Dewaxer. Proceed with either the sanding method or the non-sanding method:\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAfter the surface has been dewaxed, sand thoroughly with 80-grit paper to a dull, frosty finish.\u003c\/li\u003e\n\u003cli\u003eRewash the surface with Pettit 120 Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Pettit Hydrocoat Antifouling Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eNon-Sanding Method:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, de-wax, and etch the surface with Pettit 92 Bio-Blue Hull Surface Prep using a medium Scotch-Brite pad in a swirling motion.\u003c\/li\u003e\n\u003cli\u003eRinse all residue from the surface and let dry. Make sure the entire surface has a dull, frosty finish.\u003c\/li\u003e\n\u003cli\u003eWipe the surface to remove any excess moisture.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarrier Coats\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTo render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method).\u003c\/li\u003e\n\u003cli\u003eApply two or three coats of Pettit Protect High Built Epoxy Primer per label directions.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBare wooden hulls should be sanded thoroughly with 80-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eWipe clean of sanding residue with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eA coat of Pettit 6627 Tie-Coat Primer thinned 25% with Pettit 97 Epoxy Thinner should be applied directly to the bare wood.\u003c\/li\u003e\n\u003cli\u003eAllow to dry for four hours.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly sand with 80-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eIf priming is necessary on bare wood spots, apply a touch-up coat of Pettit 6627 Tie-Coat Primer thinned 25% with Pettit Epoxy Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHydrocoat does not require sanding between coats.\u003c\/li\u003e\n\u003cli\u003eSlight variations in color and surface texture are not uncommon and will not affect performance.\u003c\/li\u003e\n\u003cli\u003eWhen spraying, do not thin Pettit Hydrocoat more than 10%, or inadequate paint film thickness will occur.\u003c\/li\u003e\n\u003cli\u003eBurnishing the surface to create a slicker finish should be done with 400-600 grit wet-or-dry sandpaper after the coating has dried for seven days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euse this product on aluminum hulls and outdrives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Hydrocoat.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003eClick to Download Pettit Hydrocoat Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Qt","offer_id":43098117570694,"sku":"PET-1840Q","price":97.59,"currency_code":"USD","in_stock":true},{"title":"Black \/ Gal","offer_id":43098117603462,"sku":"PET-1840G","price":266.95,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098117636230,"sku":"PET-1240G","price":266.95,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098117668998,"sku":"PET-1240Q","price":97.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/pettit_hydrocoat_photo__09101.jpg?v=1770151685"},{"product_id":"inflatable-boat-paint","title":"Pettit Inflatable Boat Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit Inflatable Boat Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit's Inflatable Boat Bottom Paint is a water-based paint that provides multi-season protection against algae, barnacles, and all types of marine and fresh water fouling. Its water-based formula results in a product that is easy to apply, environmentally responsive, and is safer to use. This bottom paint exceeds even the most stringent air pollution (VOC) regulations. Pettit's Inflatable Boat Bottom Paint withstands frequent trailering, beaching, and launching while offering excellent antifouling protection. This paint is resistant to cracking, peeling, and flaking and is suitable for use on PVC or Hypalon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater-based formula\u003c\/li\u003e\n\u003cli\u003eAblative technology eliminates sanding and paint build-up\u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly, easy to apply and cleanup with soap \u0026amp; water\u003c\/li\u003e\n\u003cli\u003eUnlimited dry time to launch - can be painted in fall or winter\u003c\/li\u003e\n\u003cli\u003eComplies with all air pollution (VOC) regulations\u003c\/li\u003e\n\u003cli\u003eContains PTFE which reduces drag\u003c\/li\u003e\n\u003cli\u003eSold in quarts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFinish: Flat\u003c\/li\u003e\n\u003cli\u003eCoverage: 430 sq. ft\/gal\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: 2 Minimum\u003c\/li\u003e\n\u003cli\u003eApplication Methods: Brush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003eVOC: 150 g\/l max.\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 25.25%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003ePettit 120 Brushing Thinner\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For surface prep\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-epoxy-marine-thinner.html\" target=\"_blank\"\u003ePettit 97 Epoxy Thinner\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e- For surface prep\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Inflatable Boat Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit's Inflatable Boat Bottom paint is very easily applied by brush, roller, or spray. It is necessary to thoroughly mix Pettit Inflatable Boat Bottom Paint prior to application. Before using, check sides and bottom of can to make sure all the pigment has been mixed in. When rolling, thin the paint approximately 5-10% with clean fresh water and wet the surface to be painted with clean fresh water as well. This aids the \"hold out\" of the coating, resulting in truer color and smoother finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods\u003c\/strong\u003e: Brush, Roller, Airless or Conventional Spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 minimum with additional coat at waterline recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDry Film Thickness: \u003c\/strong\u003e1.5 mils (3.75 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e430 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eClean, fresh water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  1\/4 HR\u003c\/td\u003e\n\u003ctd\u003e  1 HR\u003c\/td\u003e\n\u003ctd\u003e  12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  2 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  1 HR\u003c\/td\u003e\n\u003ctd\u003e  4 HR\u003c\/td\u003e\n\u003ctd\u003e  48 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRubberized Fabric Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWash surface to be painted with a mild detergent and water solution, then rinse thoroughly with clean water. Allow to dry.\u003c\/li\u003e\n\u003cli\u003ePour a moderate amount of of 97 Epoxy Thinner onto a bronze wood pad.\u003c\/li\u003e\n\u003cli\u003eChoose a small area and scrub the surface lightly but thoroughly. Wipe off any excess 97 Epoxy Thinner.\u003c\/li\u003e\n\u003cli\u003eRepeat the process until the entire surface to be painted has been scrubbed and wiped clean.\u003c\/li\u003e\n\u003cli\u003eApply a generous coat of Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003cli\u003eAllow the paint to dry to recoat and apply a second full coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eFiberglass Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWash the fiberglass with Pettit 97 Epoxy Thinner to remove grease and dirt.\u003c\/li\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper to a dull, frosty finish.\u003c\/li\u003e\n\u003cli\u003eRewash sanded surface with 97 Epoxy Thinner.\u003c\/li\u003e\n\u003cli\u003eApply at least two coats of Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Coated Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTo repaint surfaces painted with this product:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eScrub the finish with an abrasive pad and recoat with a fresh coat of Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo paint old, hard antifoulings:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly wipe down the surface with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eSand surface with 80 grit sandpaper. Wipe clean with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo paint old tin or copper copolymers or Teflon-based paints:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper to remove chalky outer surface.\u003c\/li\u003e\n\u003cli\u003eWipe clean of sanding residue.\u003c\/li\u003e\n\u003cli\u003eOvercoat directly with Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTraditional, soft antifoulings should be removed before applying Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not use Pettit Inflatable Boat Bottom Paint on aluminum hulls, outdrives, or lower units.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-Inflatable-Boat-Bottom-Paint-Application-Instructions.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"61\" height=\"59\"\u003e\u003cstrong\u003eClick to Download Pettit Inflatable Boat Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"BLACK \/ Qt","offer_id":43098117832838,"sku":"PET-1841Q","price":66.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Inflatable_Boats_SKUs_-_black__62160.jpg?v=1770151560"},{"product_id":"micron-extra-spc","title":"Interlux Micron Extra SPC Antifouling Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eInterlux Micron Extra SPC Antifouling Paint\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInterlux is known for its high-quality antifouling paints that have been manufactured using only superior ingredients and developed for long-lasting results in all types of waters. Interlux Micron Extra Self Polishing Copolymer (SPC) antifouling paint is designed to provide premium multi-seasonal performance in every climate, from frigid to tropical. The paint’s SPC technology provides remarkable protection by slowly polishing away its laminated surface, whether docked or out on the water, to provide a smoother, more efficient hull while minimizing paint build up.\u003c\/p\u003e\n\u003cp\u003eInterlux Micron Extra SPC is suitable for all types of boats. It can be applied to fiberglass, wood, and previously antifouled surfaces, but is not recommended for aluminum boat bottoms. It is available in five popular colors. Two coats are recommended for complete coverage. When applied, Interlux Micron Extra SPC antifouling paint will dry with a matte finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eFor use on fiberglass, wood, and previously painted surfaces. NOTE: Do not use on aluminum.\u003c\/li\u003e\n\u003cli\u003eAntifouling paint offers multi-season protection 24\/7\/365\u003c\/li\u003e\n\u003cli\u003eMicron Extra SPC can be launched and relaunched without repainting\u003c\/li\u003e\n\u003cli\u003eThe Self Polishing Copolymer works at a constant rate for a smoother hull finish that offers greater efficiency\u003c\/li\u003e\n\u003cli\u003eIdeal for use in Brackish, Fresh, and Saltwater in both cold and tropical climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eMatte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 Coats minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 US Gallon, 1 US Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTheoretical Coverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush\/Roller: 414ft2\/gal | Spray: 276ft2\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003c\/strong\u003e450 Red, 451 Blue, 452 Black, 453 Dark Blue, 454 Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e328 g\/lt average\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eSpecial thinner 216\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For wiping down previously painted surfaces and thinning\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-fiberglass-solvent-boat-wash-wax-remover.html\"\u003eFiberglass Solvent Wash 202\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- To clean bare fiberglass prior to application\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-interprotect-epoxy-barrier-coat-kit-white\/\"\u003eInterprotect\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Epoxy barrier for blister protection, prevention, and priming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"2\" cellpadding=\"2\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature F° (C°)*\u003c\/td\u003e\n\u003ctd\u003eTouch Dry\u003c\/td\u003e\n\u003ctd\u003eOvercoating\u003c\/td\u003e\n\u003ctd\u003eImmersion Time Minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e41°F (5° C)\u003c\/td\u003e\n\u003ctd\u003e1 Hour\u003c\/td\u003e\n\u003ctd\u003e16 Hours\u003c\/td\u003e\n\u003ctd\u003e24 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59°F (15° C)\u003c\/td\u003e\n\u003ctd\u003e45 Minutes\u003c\/td\u003e\n\u003ctd\u003e10 Hours\u003c\/td\u003e\n\u003ctd\u003e18 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F (23° C)\u003c\/td\u003e\n\u003ctd\u003e30 Minutes\u003c\/td\u003e\n\u003ctd\u003e6 Hours\u003c\/td\u003e\n\u003ctd\u003e12 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95­°F (35° C)\u003c\/td\u003e\n\u003ctd\u003e20 Minutes\u003c\/td\u003e\n\u003ctd\u003e4 Hours\u003c\/td\u003e\n\u003ctd\u003e8 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*If air temperature falls below 41°F (5°C) during the dry time prior to immersion, extend the dry times 12 hours minimum\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Interlux Micron Extra SPC Ablative Antifouling Pain\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eApplication Methods: Air atomized, Brush, Roller\u003c\/li\u003e\n\u003cli\u003eRecommended DFT per coat\u003c\/li\u003e\n\u003cli\u003eBrush\/Roller: 2.4mils dry per coat\u003c\/li\u003e\n\u003cli\u003eSpray: 3.6 mils dry per coat\u003c\/li\u003e\n\u003cli\u003eRecommended WFT per coat\u003c\/li\u003e\n\u003cli\u003eBrush\/Roller: 3.9 mils wet per coat\u003c\/li\u003e\n\u003cli\u003eSpray: 5.8 mils wet per coat\u003c\/li\u003e\n\u003cli\u003eMinimum Ambient Temperature: 41°F (5° C)\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient temperature: 95°F (35°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePreviously Antifouled Surfaces:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eIn Good condition: Remove loose paint by sanding with 80 grit paper. Remove sanding residue\u003c\/li\u003e\n\u003cli\u003eIn Poor condition: Remove old antifouling paint completely before refinishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBare Fiberglass\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eIt is very important that bare fiberglass is properly prepared to prevent delamination of the antifouling paint. Begin by scrubbing the surface thoroughly with a stiff brush using soap and water to remove loose dirt and contamination.\u003c\/li\u003e\n\u003cli\u003eFlush with fresh water to remove the soap residue and allow it to dry.\u003c\/li\u003e\n\u003cli\u003eRemove mold release wax using one of the following Interlux products: Fiberglass Surface Prep or Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cli\u003eAfter the surface has been properly cleaned, follow one of the application systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiberglass No Sand System\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eClean the surface following the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eApply one coat of InterProtect 2000E or Fiberglass No-Sand Primer following the label instructions for applying the primer and overcoating with antifouling paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiberglass Sanding System\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eClean the surface following the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eSand the entire surface well with 80 grade paper until flat matte finish is obtained.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlister Prevention System\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eApply the InterProtect system for the prevention of blisters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBare Wood\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eSand with 80 grade paper.\u003c\/li\u003e\n\u003cli\u003eThen apply  the first coat reduced by 10% with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Seam Compound Brown 30.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Micron_Extra_SPC_Application-Instructions.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003eClick here for Interlux Micron Extra SPC Technical Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"BLACK \/ Gal.","offer_id":43098118127750,"sku":"ILX-YBC452G","price":394.52,"currency_code":"USD","in_stock":true},{"title":"BLACK \/ Qt","offer_id":43098118160518,"sku":"ILX-YBC452Q","price":157.8,"currency_code":"USD","in_stock":true},{"title":"BLUE \/ Qt","offer_id":43098118193286,"sku":"ILX-YBC451Q","price":161.03,"currency_code":"USD","in_stock":false},{"title":"GREEN \/ Gal.","offer_id":43098118226054,"sku":"ILX-YBC454G","price":394.52,"currency_code":"USD","in_stock":true},{"title":"RED \/ Gal.","offer_id":43098118258822,"sku":"ILX-YBC450G","price":402.56,"currency_code":"USD","in_stock":false},{"title":"DARK BLUE \/ Gal","offer_id":43103308021894,"sku":"ILX-YBC453G","price":402.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Interlux_Micron_Extra_SPC_photo__21470.jpg?v=1770151498"},{"product_id":"micron-navigator","title":"Interlux Micron Navigator w\/Biolux Antifouling Water Based Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Micron Navigator w\/Biolux Antifouling Water Based Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux Micron Navigator is a copper free antifouling paint with a water based formula. The Micron antifouling formula offers multi-season long lasting polishing protection. Dual utilization of Biolux and Econea boosts anitfouling performance in any conditions and salt water, fresh water, and brackish water. The fast drying formula has been engineered for application in  temperatures as low as 41° F. Micron Navigator is easily applied over most antifouling paints and can be sed on any substrate including primed underwater metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater based Copper Free formula\u003c\/li\u003e\n\u003cli\u003eUse on Fiberglass, Wood, Aluminum\u003c\/li\u003e\n\u003cli\u003eMulti-Season\u003c\/li\u003e\n\u003cli\u003eFast Dry Tech\u003c\/li\u003e\n\u003cli\u003eLow Temperature application\u003c\/li\u003e\n\u003cli\u003ePolishing Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: US Gallon or Quart\u003c\/li\u003e\n\u003cli\u003eRecommended usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: Black (YBD779), Blue (YBD769), Green (YBD759), Red (YBD749), White (YBD704)\u003c\/li\u003e\n\u003cli\u003eDrying time: 30 minutes Touch Dry; 2 hours Overcoat; 6 hours immersion @ 77°F\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: 2 coats for multi-season performance when the recommended DFT is applied\u003c\/li\u003e\n\u003cli\u003eRecommended DFT per coat: 1.5 mils dry per coat\u003c\/li\u003e\n\u003cli\u003eRecommended WFT per coat: 4 mils wet per coat\u003c\/li\u003e\n\u003cli\u003eCoverage: 408 ft²\/gal - Brush\/Roller\u003c\/li\u003e\n\u003cli\u003eVOC: 8.89 g\/lt (average)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Interlux Micron Navigator w\/Biolux Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMixing: Shake or Stir throughly before use. Use a wooden or plastic stirring stick. Leave to stand for 10 minutes after stirring for air bubbles to disperse.\u003c\/li\u003e\n\u003cli\u003eThinner: thinning\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003erecommended unless for Bare Wood (see preparation section)\u003c\/li\u003e\n\u003cli\u003eOther: Antifouling coatings should only be vacuum sanded or wet sanded.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNever\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eburn off old antifouling coatings. True color will develop after immersion. To prevent premature failure, ensure correct amount of paint is applied using the coverage as a guide.\u003c\/li\u003e\n\u003cli\u003eApplication Methods: Brush, Roller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eGood Condition:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove all traces of loose paint and contamination by sanding\u003c\/li\u003e\n\u003cli\u003eSand the entire surface well with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePoor Condition:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely remove all old antifouling paint with paint stripper and proceed\u003c\/li\u003e\n\u003cli\u003eProceed with the application system for bare work as described below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass (Polyester or Vinylester) Epoxy\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eScrub the surface with soap and water using a stiff brush\u003c\/li\u003e\n\u003cli\u003eApply Fiberglass Surface Prep YMA601V with a 3\/8\" nap roller\u003c\/li\u003e\n\u003cli\u003eDewax the surface working in 10x10 foot areas. Ensure the YMA601V is removed before drying. Scrub the Surface Prep with a 3M Doodlebug or brown Scotch-Brite pad.\u003c\/li\u003e\n\u003cli\u003eOnce all areas have been scrubbed use wet rags or high pressure rinse to remove all traces of the Fiberglass Surface Prep. *change rags frequently*\u003c\/li\u003e\n\u003cli\u003eWipe down with clean cloths, repeating the process until water no longer beads.\u003c\/li\u003e\n\u003cli\u003eThe surface must be clean and dry prior to application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Refer to the surface preparation instructions above before application*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Simple No Sand System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eFollow the above Surface Preparation instructions\u003c\/li\u003e\n\u003cli\u003eApply the Micron Navigator within 4 hours of cleaning\u003c\/li\u003e\n\u003cli\u003eIf this time is exceeded rinse with fresh water and allow to dry\u003c\/li\u003e\n\u003cli\u003eIf exceeding 2 months between de-waxing and painting, repeat cleaning instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Blister Prevention System\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eFollow the above Surface Preparation instructions\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade (grit) paper\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003cli\u003eApply Interprotect 2000E to a thickness of 10 mils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarewood:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grade (grit) paper\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003cli\u003eApply the first coat of Micron Navigator thinned 10% with water\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Seam Comppound Brown 30\u003c\/li\u003e\n\u003cli\u003eApply 2 more coats of Micron Navigator unreduced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eAluminum\/Underwater Metals:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGritblast or sand with medium grade (grit) emery cloth to a bright metal finish and wipe clean\u003c\/li\u003e\n\u003cli\u003eApply one coat of Interprotect 2000E that has been thinned 15-20% with reducing solvent 2316N\u003c\/li\u003e\n\u003cli\u003eApply the interprotect the same day as blasting or sanding\u003c\/li\u003e\n\u003cli\u003eApply 3-4 additional coats of INterprotect 2000E, unthinned\u003c\/li\u003e\n\u003cli\u003eApply Micron Navigator following the recommended overcoating times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eFactory Finished Aluminum:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrime with Primocon\u003c\/li\u003e\n\u003cli\u003eApply 2 coats of Micron Navigator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eDry Times\u003c\/h2\u003e\n\u003ctable border=\"1\" cellspacing=\"2\" cellpadding=\"2\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e41° F\u003c\/td\u003e\n\u003ctd\u003e59° F\u003c\/td\u003e\n\u003ctd\u003e77° F\u003c\/td\u003e\n\u003ctd\u003e95° F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch Dry\u003c\/td\u003e\n\u003ctd\u003e1.5 hours\u003c\/td\u003e\n\u003ctd\u003e60 minutes\u003c\/td\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003ctd\u003e15 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvercoat\u003c\/td\u003e\n\u003ctd\u003e6 hours\u003c\/td\u003e\n\u003ctd\u003e4 hours\u003c\/td\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003ctd\u003e60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImmersion\u003c\/td\u003e\n\u003ctd\u003e48 hours\u003c\/td\u003e\n\u003ctd\u003e8 hours\u003c\/td\u003e\n\u003ctd\u003e6 hours\u003c\/td\u003e\n\u003ctd\u003e60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Micron_Navigator_TDS.pdf\"\u003e\u003cspan\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003eClick here to download Micron Navigator Technical Data Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"BLACK \/ Qt","offer_id":43098111115398,"sku":"ILX-YBD779Q","price":121.14,"currency_code":"USD","in_stock":true},{"title":"WHITE \/ Qt","offer_id":43098111148166,"sku":"ILX-YBD704Q","price":121.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Interlux_Micron_Navigator_photo__40770.jpg?v=1770151413"},{"product_id":"micron-cf","title":"Interlux Micron CF Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Micron CF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eAntifouling Copper-Free Paint with Econea\u003c\/p\u003e\n\u003cp\u003eMicron® CF features all the fantastic benefits of Micron technology-without copper. Micron CF is your multi season antifouling solution with its Biolux® Slime Blocking Technology to combat slime and Econea™ to ward off barnacles and zebra mussels. Micron CF features self polishing that reduces paint build- up and the self-smoothing paint reduces friction and improves fuel efficiency. Micron CF is available in 4 bright colors including Shell White as well as a crisp black. A high solids formulation, Micron CF offers reduced solvent emissions and is VOC compliant. Safe on all hull materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo sanding or prep work required.\u003c\/li\u003e\n\u003cli\u003eCopper free formula\u003c\/li\u003e\n\u003cli\u003eHaul \u0026amp; Relaunch without repainting\u003c\/li\u003e\n\u003cli\u003eReduced solvent emissions\u003c\/li\u003e\n\u003cli\u003eTouch dry – 1 hour; Dry to overcoat – 2 hours; Dry to launch – 6 hours minimum\u003c\/li\u003e\n\u003cli\u003eVOC compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Micron technology?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicron Technology is the basis of all Micron bottom paints and the formulations are second to none. Micron Technology was first introduced to the industry in the early 80's and has evolved into the class leading antifouling paints. \u003cbr\u003e- Longest lasting, multi-season ability to haul and re-launch without repainting \u003cbr\u003e- Controlled polishing like a bar of soap reduces paint build up, eliminating the need for sanding \u003cbr\u003e- Micron Technology polishes to a smoother surface than hard antifoulings - maximizing fuel savings \u003cbr\u003e- Unlike old fashion high copper bottom paints, Micron uses less copper more efficiently for longest lasting antifouling protection\u003c\/p\u003e\n\u003cp\u003eMicron Technology vs old fashioned hard antifoulings\u003cbr\u003eAfter many years of using old fashioned hard high copper bottom paints, the paint film continues to build up, become brittle, and starts to crack and flake off. Micron Technology antifoulings polish at a controlled rate and therefore will never build up. It is this controlled polishing that enables Micron to be used on all boats, in all waters, and at all times! No paint build up means that you will never have to remove old layers of Micron and spend precious hours or money each time you want to repaint.\u003c\/p\u003e\n\u003cp\u003eMicron Technology and fuel savings\u003cbr\u003eThere's another added benefit to controlled polishing: fuel savings! The roughness caused by old fashioned hard high copper bottom paints creates extra drag on boat bottoms requiring the use of more horsepower. With extra horsepower comes extra fuel consumption, extra fuel consumption means more money at the fuel pump. There is only one way to ensure that the bottom is smooth and that is to choose Micron Technology. Micron Technology antifouling polishes at a controlled rate leaving your bottom smooth - remember the smoother the bottom paint, the lower the resistance; the lower the surface resistance the better the fuel economy.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e------------------------------------------------------------------------------------------------\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003cp class=\"tab_label\"\u003e\u003cstrong\u003e\u003cspan\u003eHow To Apply Micron CF\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION DATA METHOD\u003c\/strong\u003e: Airless Spray, Brush, Conventional Spray, Roller  \u003cem\u003eDO NOT SPRAY\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewithout following proper safety procedures for spray application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDRY FILM THICKNESS PER COAT: \u003c\/strong\u003e2 mils (3 wet mils)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e 518 sq. ft\/gal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION TEMP:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e41°F Min. \/ 95°F Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHINNER:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSpecial Thinner 216\u003c\/p\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Touch\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003ctd\u003eTo Launch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e9 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePREVIOUSLY PAINTED SURFACES:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIn Good Condition with Pacifica or Trilux 33: Sand with 80 grade (grit) paper. Remove sanding residue. TBT Copolymers: If these coatings are more than a year old, wet sand the surface with 80 (grit) grade paper to a clean, firmly attached surface. Remove sanding residue. Apply 1-2 coats of TBT Sealer. Sand surface with 80 grade (grit) paper to a clean firmly attached surface. Remove sanding residue. Non-TBT Copolymers: Apply 1 coat of Primocon. Hard Antifoulings: Sand surface with 80 grade (grit) paper to a clean firmly attached surface. Remove sanding residue. Apply Micron CF. In Poor Condition: Remove antifouling paint in poor condition with Interstrip Semi-Paste 299E. Sand and wipe clean with Fiberglass Solvent Wash 202.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIt is very important that bare fiberglass be properly prepared to completely remove the mold release wax. This will prevent delamination of the antifouling paint. Begin by scrubbing the surface thoroughly with a stiff brush using soap and water to remove loose dirt and contamination. Flush with fresh water to remove the soap residue and allow to dry. Remove mold release wax using one of the following Interlux products, Fiberglass Surface Prep YMA601 or Fiberglass Solvent Wash 202 following the product label instructions. To be certain the contamination has been removed, run water over the surface. If the water beads up or separates, repeat cleaning process. When the water sheets off, all contamination has been removed. After the surface has been properly cleaned, follow one of the application systems below. No Sand System - Apply one thin, continuous coat of Interprotect 2000E or Fiberglass No-Sand Primer. Sanding System - Sand with 80 grade (grit) paper. Remove sanding residue and wipe with Fiberglass Solvent Wash 202.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE WOOD:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSand with 80 grade (grit) paper. Remove sanding residue. Apply first coat reduced 10% with Special Thinner 216. Fill seams, if necessary, with Seam Compound Brown 30.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUNDERWATER METAL PARTS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSandblast or sand with medium grade (grit) emery cloth to a bright metal finish and wipe clean. Apply one coat of Interprotect 2000E that has been thinned 15-20% with Reducing Solvent 2316N. Apply the Interprotect the same day as blasting or sanding. When the Interprotect 2000E is thumbprint tacky apply the first coat of Micron CF. Apply 2-3 coats of Micron CF following the proper dry times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAt least 2 coats should be applied. Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges. Thinning Do not exceed 10% maximum. Airless Spray Pressure: 170-204 bar\/2500-3000 psi. Tip Size: 0.53 mm\/0.021\" Conventional Spray Pressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 10-15 psi (pot pressure). Tip Size: 1.8-2.2 mm\/0.071-0.087\" Other To prevent premature failure, ensure correct amount of paint is applied using the coverage as a guide. Apply to clean, dry, properly prepared surfaces only. Surface must be dry and clean, and free from grease, loose paint etc. Do not apply Micron CF directly to aluminum. All metal surfaces must be primed with Interprotect 2000E\/2001E or Primocon. Do not apply direct to tin-based paint such as Micron® 33, Micron® 44 or Tri-Lux® IIT.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Micron_CF.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Micron_CF.pdf\"\u003eHow to Apply\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/YBD100_Micron_CF_Blue_MSDS.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"42\" height=\"40\"\u003eMSDS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Gal","offer_id":43098111737990,"sku":"ILX-YBD103G","price":371.71,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098111770758,"sku":"ILX-YBD100G","price":371.71,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098111803526,"sku":"ILX-YBD101G","price":371.71,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098111836294,"sku":"ILX-YBD102G","price":371.71,"currency_code":"USD","in_stock":true},{"title":"Shell White \/ Gal","offer_id":43103307169926,"sku":"ILX-YBD104G","price":371.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/MicronCF__55678.jpg?v=1770151315"},{"product_id":"micron-csc","title":"Interlux Micron CSC Antifouling Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch1 dir=\"ltr\" class=\"classyunicodedone\"\u003eInterlux Micron CSC Antifouling Bottom Paint\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-4896b11a-7fff-9470-d911-b7b9be33890b\"\u003e\u003cstrong\u003eStay ahead of marine growth with Interlux Micron CSC, a premium self-polishing antifouling paint designed for long-lasting performance.\u003c\/strong\u003e\u003cspan\u003e This Interlux boat paint gradually wears away over time, ensuring a fresh layer of biocide is always exposed for consistent protection. Its multi-season formula is ideal for boats in both saltwater and freshwater, reducing the need for frequent haul-outs. With a smooth, fuel-efficient finish and easy application, Micron CSC is a trusted choice for boaters who want reliable antifouling without the extra work. \u003c\/span\u003e\u003cspan\u003eAvailable in blue, green, red, or gray.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eFeatures\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSuperior Multi-Season Protection \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDesigned for powerboats and sailboats, Micron bottom paint delivers consistent antifouling performance across a wide range of marine environments, providing year-round defense against fouling.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMatte Finish for a Clean Look \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMicron CSC provides a smooth, matte finish, ensuring a sleek appearance while offering maximum protection below the waterline.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSelf-Polishing Ablative Formula \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInterlux Micron CSC gradually wears away as the boat moves, revealing fresh layers of biocide (37.2% Cuprous oxide) to combat marine growth continuously. This means:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eNo unnecessary buildup of old paint layers\u003c\/li\u003e\n\u003cli\u003eMinimal sanding between repaints\u003c\/li\u003e\n\u003cli\u003eLess maintenance and easier touch-ups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIdeal for Haul-Outs and Relaunching\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eUnlike many antifouling coatings, Micron bottom paint remains effective even after haul-outs, making it a smart choice for seasonal storage, trailered boats, and dry-stored vessels.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEasy Application and Fast Drying\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe bottom paint can be applied using a brush, roller, or spray, and it dries quickly for minimal downtime. Its high film-build formula also delivers durability and longevity in every coat.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEnvironmentally Responsible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMicron CSC is a more eco-conscious alternative to traditional bottom paints, with its low solvent emissions and high solids composition.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eAvailable Colors and Pack Sizes\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\" align=\"center\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e \u003ccol width=\"348\"\u003e \u003ccol width=\"114\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eColor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eCode\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eBlue\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5580\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eGreen\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5581\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eRed\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5582\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eBlack\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5583\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eShark White (may turn green above the waterline)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5584\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"center\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e \u003ccol width=\"155\"\u003e \u003ccol width=\"248\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003ePack Sizes\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eAvailability \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e1 US Quart\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eAvailable\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e1 US Gallon\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eAvailable\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e3 US Gallon\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eGreen, Blue, Red \u0026amp; Black - US Only)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eApplication and Coverage\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eFor optimal performance, apply a minimum of two coats. Areas exposed to higher water friction, such as chines, rudders, stern gear, and leading edges, should receive an additional stripe coat.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMicron CSC bottom paint can be applied using a roller, brush, or spray. Each coat should have a dry film thickness of 2 mils and cover approximately 439.7 square feet per gallon.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor best results, apply in temperatures between 50°F and 90°F. If thinning is needed, use Brush-Ease 433 or Special Thinner 216.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eDrying and Recoat Times \u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e90°F: Dries to touch in 1 hour, ready to recoat or launch in 16 hours.\u003c\/li\u003e\n\u003cli\u003e70°F: Dries to touch in 4 hours, ready to recoat or launch in 16 hours.\u003c\/li\u003e\n\u003cli\u003e50°F: Dries to touch in 4 hours, ready to recoat or launch in 16 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSurface Preparation\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003ePreviously Painted Surfaces\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eIf the existing paint is intact, sand lightly with 80-grit sandpaper to remove dust and loose paint, then clean thoroughly.\u003c\/li\u003e\n\u003cli\u003eIf the paint is peeling or deteriorated, strip away the damaged layers using Interstrip Semi-Paste 299E before repainting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eProper surface preparation is critical to ensure strong adhesion and prevent delamination.\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eClean the surface with soap, water, and a stiff brush, then rinse to remove all residue.\u003c\/li\u003e\n\u003cli\u003eEliminate any mold-release wax using\u003cspan\u003e \u003c\/span\u003eFiberglass Solvent Wash 202\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eFiberglass Surface Prep YMA601V, following manufacturer instructions. \u003c\/li\u003e\n\u003cli\u003eUse Interlux Watertite to repair imperfections and surface flaws as needed.\u003c\/li\u003e\n\u003cli\u003eChoose between two priming options:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eNo-Sand System: Apply Fiberglass No-Sand Primer or\u003cspan\u003e \u003c\/span\u003eInterProtect 2000E\u003cspan\u003e \u003c\/span\u003eas per label instructions.\u003c\/li\u003e\n\u003cli\u003eSanding System: Use 80-grit sandpaper to create a dull, textured surface, then wipe away debris before painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eSmooth the surface with 80-grit sandpaper, then clean away dust with\u003cspan\u003e \u003c\/span\u003eBrush Ease 433.\u003c\/li\u003e\n\u003cli\u003eFor the initial coat, use\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eSpecial Thinner 216\u003c\/a\u003eto thin the paint by 10%.\u003c\/li\u003e\n\u003cli\u003eIf gaps or seams need sealing, apply Seam Compound Brown 30 as required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eImportant Notes\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eNot suitable for aluminum hulls or fittings.\u003c\/li\u003e\n\u003cli\u003eDo not apply over tin-based copolymer antifouling paints.\u003c\/li\u003e\n\u003cli\u003eColors may fade over time, especially near the waterline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes Interlux Micron CSC antifouling paint work on all hull materials?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMicron CSC is compatible with wood, fiberglass, and properly primed metal surfaces but should not be used on aluminum hulls or fittings due to potential corrosion risks.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan this paint be applied over existing antifouling paint? \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, as long as the previous coating is intact and properly prepped. If the old paint is peeling or is in poor condition, it should be removed before applying Micron CSC.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is the coverage area per gallon of Interlux Micron CSC?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWhen applied correctly, one gallon provides approximately 439.7 square feet of coverage.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Qt","offer_id":43098113736838,"sku":"ILX-5583Q","price":98.58,"currency_code":"USD","in_stock":true},{"title":"Black \/ Gal","offer_id":43098113769606,"sku":"ILX-5583G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098113802374,"sku":"ILX-5580Q","price":98.58,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098113835142,"sku":"ILX-5580G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"Green \/ Qt","offer_id":43098113867910,"sku":"ILX-5581Q","price":98.58,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098113900678,"sku":"ILX-5581G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098113933446,"sku":"ILX-5582G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"Red \/ Qt","offer_id":43098113966214,"sku":"ILX-5582Q","price":98.58,"currency_code":"USD","in_stock":true},{"title":"White \/ Gal","offer_id":43098113998982,"sku":"ILX-5584G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"White \/ Qt","offer_id":43098114031750,"sku":"ILX-5584Q","price":98.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/MicronCSC__89761.jpg?v=1770151188"},{"product_id":"neptune-hrt","title":"Pettit Neptune HRT Water-Based Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Neptune HRT\u003cspan lang=\"EN\"\u003e\u003cspan\u003e \u003c\/span\u003eWater-Based Bottom Paint\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003ePettit Neptune HRT bottom paint uses the latest technology available to create a hybrid paint film strong enough to handle the tough marine environment without building up over time. Soap and water cleanup, along with no strong solvent smell, yields a user-friendly application. Neptune HRT antifouling paint does not require sanding between coats, saving time and money. With low VOC it's ideal for marinas under restrictions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHRT: Hybrid Reactive Technology\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efeatures high density biocide utilization to maximize effectiveness, along with film modifiers to reduce yearly build-up, maintain color consistency, and lower weight.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in gallons\u003c\/li\u003e\n\u003cli\u003eEconomical hybrid protection\u003c\/li\u003e\n\u003cli\u003eSmooth durable polishing finish\u003c\/li\u003e\n\u003cli\u003eApply over most antifouling paints\u003c\/li\u003e\n\u003cli\u003eSimple soap and water clean up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1243 Blue, 1643 Red, 1843 Black\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow Much Pettit Neptune HRT Do I Need for My Boat?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Pettit Neptune HRT paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Neptune HRT Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Neptune HRT Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Neptune HRT provides. (500 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Neptune HRT antifouling paint has a coverage of 500 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow To Apply Pettit Neptune HRT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePettit Neptune HRT is easily applied by brush, roller or spray. When rolling use only a high-quality short nap (maximum 3\/16” nap) roller cover. Apply using thin coats; over-application of this product will virtually assure inadequate coating performance. For the smoothest possible finish: Thin the paint approximately 5-10% with clean fresh water. Wet the surface to be painted thoroughly with clean fresh water as well. This will provide a truer color and smoother finish. Slight variations in color and surface texture are not uncommon and should not be looked at with dismay. The surface will quickly smooth itself once in the water and any mottling of the color will diminish as well.\u003c\/p\u003e\n\u003cp\u003ePettit Neptune HRT contains cuprous oxide. As a result, there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFlat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/16”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 minimum per season with additional coat at waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.75 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.5 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50° F. Min. \/ 90°F. Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e500 ft2 \/gal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003ePreviously Painted Surfaces:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTo paint old hard and ablative antifoulings, thoroughly wipe down the surface with 120 brushing Thinner, paying particular attention to waterline areas, then sand painted surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eWipe clean of sanding residue with water and apply Pettit Neptune HRT.\u003c\/li\u003e\n\u003cli\u003eOld tin or copper copolymers or Teflon based antifoulings should be sanded thoroughly with 80 grit sandpaper to remove the chalky outer surface, wiped clean of sanding residue, and then may be over coated directly with Pettit Neptune HRT.\u003c\/li\u003e\n\u003cli\u003eSoft, sloughing antifoulings should be removed before applying Pettit Neptune HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eBare Fiberglass:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSanding Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSand the hull thoroughly with 80-grit sandpaper to a dull, frosty finish and rewash the sanded surface with 120 Brushing Thinner to remove sanding residue. Then apply two or three thin coats of this product, following application instructions. Careful observation of application instructions will help ensure long-term adhesion of this and subsequent years’ antifouling paint.\u003c\/p\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eTo eliminate the sanding method, three alternative methods are available:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit D95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip- Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three thin coats of this product.\u003c\/li\u003e\n\u003cli\u003eThoroughly clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a coarse Scotch-Brite pad in a swirling motion. Thoroughly rinse all residue from the surface and let dry. Then apply one coat of Pettit-Protect High Build Epoxy Primer. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three thin coats of this product.\u003c\/li\u003e\n\u003cli\u003eEasy 2-Step Sandless Method - Thoroughly clean and prep hull using 92 Bio-Blue and a Scotch-brite pad as described above. Make sure that the entire surface has a dull, frosty finish. Wipe the surface to remove any excess moisture and apply two thin coats of Neptune 5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eBare Wood:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBare wooden hulls should be sanded thoroughly with 80-grit sandpaper and wiped clean of sanding residue.\u003c\/li\u003e\n\u003cli\u003eA coat of 6627 Tie-Coat Primer thinned 25% with 97 Epoxy Thinner should be applied directly to the bare wood.\u003c\/li\u003e\n\u003cli\u003eAllow drying 4 hours and then applying two un-thinned coats of Pettit Neptune HRT as per instructions.\u003c\/li\u003e\n\u003cli\u003eExisting, hard antifouling paint should be thoroughly sanded.\u003c\/li\u003e\n\u003cli\u003eIf priming is necessary on bare wood spots, apply a touch-up coat of 6627 Tie-Coat Primer thinned 25% with 97 Epoxy Thinner to these areas.\u003c\/li\u003e\n\u003cli\u003eThen apply the subsequent coats of Pettit Neptune HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eSteel Hulls:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTo remove loose rust and scale from the metal surface, scrape, sandblast or wire brush.\u003c\/li\u003e\n\u003cli\u003eSolvent-clean the surface to remove grease and dirt then apply one or two coats of Pettit 6980 Rustlok Primer followed by two coats of Pettit 4700\/4701 High Build Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with Pettit Neptune HRT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eUnderwater Metal Parts:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAbrade to clean bright metal by scraping, sandblasting or wire brushing.\u003c\/li\u003e\n\u003cli\u003eSolvent clean and apply one thin coat of Pettit 6455\/044 Metal Primer*. Let it dry for two hours and apply two coats of Pettit 6627 Tie Coat Primer. Allow the second coat of 6627 Tie-Coat Primer dry for at least four hours and apply Pettit Neptune HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eDO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*These are simplified systems for small areas. Always read the labels or tech sheets for all products specified herein before using.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Neptune-5_Hybrid.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Neptune-5_Hybrid.pdf\"\u003eClick to Download Pettit Neptune HRT Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098114556038,"sku":"PET-1843G","price":150.19,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098114588806,"sku":"PET-1243G","price":150.19,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098114621574,"sku":"PET-1343G","price":150.19,"currency_code":"USD","in_stock":false},{"title":"Red \/ Gal","offer_id":43098114654342,"sku":"PET-1643G","price":150.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Premium_HRT_Bottom_Paint__47671_68e24f70-f4db-4f96-ba32-6bffda89350c.jpg?v=1770172262"},{"product_id":"odyssey-hd","title":"Pettit Odyssey HD Ablative Antifouling Bottom Paint","description":"\u003ch3 class=\"classyunicodedone\"\u003e\n\u003cstrong\u003e$25 Rebate Per Gallon on Pettit Hydrocoat\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e– Valid through May 31 (Limit 2 gallons per customer). \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/pettit-protect-your-adventure-rebate-tear-tab-2026.pdf?v=1772221726\" target=\"_blank\" title=\"Pettit Rebate Form\" rel=\"noopener\"\u003eDownload Rebate Form\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit Odyssey HD Ablative Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit Odyssey HD Bottom Paint is a multi-season antifouling paint that combines controlled polishing ablative technology with a high copper content. Odyssey HD provides a paint film strong enough to handle tough fouling waters from coast to coast. This bottom paint is 50 state VOC-compliant and will not build up over time, leaving running surfaces smooth and clean. Odyssey HD's copolymer resins withstand hauling and relaunching without losing effectiveness for both power and sailboats. Additionally, Odyssey is fast-drying and provides multi-season protection.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pettt-hull-defense.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettt-hull-defense.jpg\" alt=\"pettt-hull-defense.jpg\" width=\"116\" height=\"130\"\u003e\u003c\/p\u003e\n\u003cp\u003e Pettit Odyssey HD provides excellent antifouling protection and is backed by the industry's strongest limited warranty. The Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Odyssey HD offers the most dependable and trusted antifouling paint in the industry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-season protection\u003c\/li\u003e\n\u003cli\u003eFast dry, VOC-compliant for boatyards\u003c\/li\u003e\n\u003cli\u003eHigh-copper ablative protection in all waters\u003c\/li\u003e\n\u003cli\u003eSmooth polishing finish prevents buildup and sanding\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eCovered by HD (Hull Defense) 18 month limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: 1 US Gallon, 1 US Quart\u003c\/li\u003e\n\u003cli\u003eType: Copper-based ablative\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: 1207 Blue, 1807 Black, 1227 Dark Blue, 1307 Green, 1607 Red\u003c\/li\u003e\n\u003cli\u003eDrying Time: To overcoat 3hrs; To launch; 10hrs. @ 70°F\u003c\/li\u003e\n\u003cli\u003eNumber of Coats Recommended: 2\u003c\/li\u003e\n\u003cli\u003eCoverage: 475 ft2\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 330 grams\/liter\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 45.7%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\" target=\"_blank\"\u003ePettit Protect Epoxy Primer\u003c\/a\u003e - Primer for bare fiberglass applications\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003ePettit 120 Thinner \u003c\/a\u003e- For surface prep\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Odyssey HD Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Odyssey paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Odyssey Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Odyssey Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Odyssey HD provides. (475 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Odyssey HD has a coverage of 475 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Odyssey HD Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eOdyssey HD is easily applied by brush, roller, or spray. When rolling, use only a high-quality roller cover. Prior to application, it is necessary to thoroughly mix the paint before using. Odyssey HD contains cuprous oxide, so there is a tendency for settling to occur. Shake the can of paint on a mechanical paint shaker, a wooden paddle, or an electric drill mixer. Before using, check the sides and bottom of can to ensure all the pigment has been mixed in. Adhere to all application instructions to obtain optimum performance. If spraying, make sure not to thin more than 10% or inadequate paint film thickness will occur.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness: \u003c\/strong\u003e1.6 mils (3.2 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 475 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e 50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003e120 Brushing Thinner or 121 Spraying Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  1\/4 HR\u003c\/td\u003e\n\u003ctd\u003e  1-1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  3 HR\u003c\/td\u003e\n\u003ctd\u003e  10 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  1 HR\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTo paint old hard and ablative bottom paints, thoroughly wipe down the surface with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eSand painted surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eFor old tin or copper copolymers or Teflon-based bottom pants, sand thoroughly with 80 grit sandpaper to remove outer surface.\u003c\/li\u003e\n\u003cli\u003eWipe clean and apply two coats of Odyssey HD.\u003c\/li\u003e\n\u003cli\u003eSoft, sloughing paint should be removed prior to applying Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or dewaxed several times with D-95 Dewaxer. Then proceed with one of the systems below:\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand hull thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cem\u003eNon-Sanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, dewax surface with 92 Bio-Blue Surface Prep using a course nylon scuff pad.\u003c\/li\u003e\n\u003cli\u003eRinse all residue from surface and let dry.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Pettit Protect Epoxy Primer 4700\/4701 following primer label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarrier Coat\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrepare the fiberglass surface as mentioned above (sanding method).\u003c\/li\u003e\n\u003cli\u003eApply two - three coats of Pettit Protect Epoxy Primer per label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 6627 Tie-Coat Primer thinned 25% with 97 Epoxy Thinner directly to bare wood.\u003c\/li\u003e\n\u003cli\u003eAllow drying for 4 hours then apply two un-thinned coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly sand existing hard antifouling paint\u003c\/li\u003e\n\u003cli\u003eIf priming is necessary on bare wood spots, apply a touch-up coat of 6627 Tie-Coat Primer thinned 25% with Epoxy thinner.\u003c\/li\u003e\n\u003cli\u003eApply coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt.\u003c\/li\u003e\n\u003cli\u003eRemove loose rust and scale from the metal surface by scraping or sandblasting.\u003c\/li\u003e\n\u003cli\u003eBlow off residue then apply one or two coats of Pettit 6980 Rustlok Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with two coats of Pettit 4700\/4701 Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not use Pettit Odyssey HD on aluminum hulls and outdrives.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-Odyssey-HD-Application-Instructions.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"64\" height=\"62\"\u003e\u003cstrong\u003eClick to Download Pettit Odyssey HD Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098115178630,"sku":"PET-1807G","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098115211398,"sku":"PET-1207G","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Dark Blue \/ Gal","offer_id":43103255396486,"sku":"PET-1227G","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43103291965574,"sku":"PET-1307G","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43103291998342,"sku":"PET-1607G","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/PET-1207G__17580.jpg?v=1770171811"},{"product_id":"odyssey-60","title":"Pettit Odyssey 60 Ablative Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Odyssey 60 Multi-Season Ablative Boat Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit Odyssey 60 is a high-copper, multi-season ablative bottom paint. This ablative paint delivers exceptional multi-season performance against fouling by offering the highest copper content available in an ablative paint. With significantly more copper than competitors, Odyssey 60 offers stronger protection at a better value. It provides protection in all water types and is compatible over most bottom paints.\u003c\/p\u003e\n\u003cp\u003ePettit Odyssey 60 features fast dry technology, providing quick turnaround and increased production for all applicators. Unique controlled erosion technology minimizes coating build-up while keeping underwater surfaces smooth. Its ablative surface wears away with use, providing a continuous supply of fresh biocides while eliminating the need for sanding. Odyssey 60 can be hauled and re-launched without repainting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pettt-hull-defense.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettt-hull-defense.jpg\" alt=\"pettt-hull-defense.jpg\" width=\"116\" height=\"130\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e Pettit Odyssey 60 provides excellent antifouling protection and is backed by the industry's strongest limited warranty. The Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Odyssey 60 offers the most dependable and trusted antifouling paint in the industry.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast dry, VOC compliant standard for boatyards\u003c\/li\u003e\n\u003cli\u003eHigh-copper (65%) ablative protection in all waters\u003c\/li\u003e\n\u003cli\u003eSmooth polishing finish prevents buildup and sanding\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eCovered by HD (Hull Defense) 18 Month Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: 1 US Gallon\u003c\/li\u003e\n\u003cli\u003eType: Copper-based ablative\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: 1265 Blue, 1365 Green, 1665 Red, 1865 Black\u003c\/li\u003e\n\u003cli\u003eNumber of Coats Recommended: 2 minimum\u003c\/li\u003e\n\u003cli\u003eCoverage: 440 ft2\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 370 grams\/liter\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 65%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\" target=\"_blank\"\u003ePettit Protect Epoxy Primer\u003c\/a\u003e - Primer for bare fiberglass applications\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003ePettit 120 Thinner \u003c\/a\u003e- For surface prep\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Odyssey 60 Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Odyssey 60 paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Odyssey 60 Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Odyssey 60 Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Odyssey 60 provides. (440 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Odyssey 60 has a coverage of 440 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Odyssey 60 Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eOdyssey 60 is heavily loaded with cuprous oxide. As a result, there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. Adhere to all application instructions, precautions, conditions, and limitations to obtain optimum performance.\u003c\/p\u003e\n\u003cp\u003eWhen spraying, do not thin Odyssey 60 more than 10% (12 ounces per gallon) or inadequate paint film thickness will occur. When applying by roller, use a short nap (3\/8\" maximum) roller cover.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2 minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness: \u003c\/strong\u003e2 mils (3.6 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 440 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e 50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003e120 Brushing Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  1\/4 HR\u003c\/td\u003e\n\u003ctd\u003e  3 HR\u003c\/td\u003e\n\u003ctd\u003e  8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  1 HR\u003c\/td\u003e\n\u003ctd\u003e  12 HR\u003c\/td\u003e\n\u003ctd\u003e  24 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is in good condition, thoroughly sand with 80 grit paper then solvent clean with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Odyssey 60.\u003c\/li\u003e\n\u003cli\u003eIf previous coating is soft or in poor condition, remove to the bare surface by sanding or using EZ Speed Strip 125.\u003c\/li\u003e\n\u003cli\u003eProceed with appropriate bare system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or dewaxed several times with D-95 Dewaxer. Then proceed with one of the systems below:\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand hull thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two or three thin coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cem\u003eNon-Sanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, dewax surface with 92 Bio-Blue Surface Prep using a course nylon scuff pad.\u003c\/li\u003e\n\u003cli\u003eRinse all residue from surface and let dry.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Pettit Protect Epoxy Primer 4700\/4701 following primer label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two or three thin coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarrier Coat\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrepare the fiberglass surface as mentioned above (sanding method).\u003c\/li\u003e\n\u003cli\u003eApply two - three coats of Pettit Protect Epoxy Primer per label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two or three thin coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 6627 Tie-Coat Primer thinned 25% with 97 Epoxy Thinner directly to bare wood.\u003c\/li\u003e\n\u003cli\u003eAllow drying for 4 hours then apply two un-thinned coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly sand existing hard antifouling paint\u003c\/li\u003e\n\u003cli\u003eIf priming is necessary on bare wood spots, apply a touch-up coat of 6627 Tie-Coat Primer thinned 25% with Epoxy thinner.\u003c\/li\u003e\n\u003cli\u003eApply coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt.\u003c\/li\u003e\n\u003cli\u003eRemove loose rust and scale from the metal surface by scraping or sandblasting.\u003c\/li\u003e\n\u003cli\u003eBlow off residue then apply one or two coats of Pettit 6980 Rustlok Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with two coats of Pettit 4700\/4701 Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDo not use Pettit Odyssey 60 on aluminum hulls and outdrives.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-Odyssey-60-Bottom-Paint-Application-Instructions.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"64\" height=\"62\"\u003e\u003cstrong\u003eClick to Download Pettit Odyssey 60 Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098115571846,"sku":"PET-1865G","price":411.06,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098115604614,"sku":"PET-1265G","price":411.06,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098115637382,"sku":"PET-1665G","price":411.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Odyssey_60_Ablative_Bottom_Paint___64159.jpg?v=1770171454"},{"product_id":"odyssey-triton","title":"Pettit Odyssey Triton Ablative Antifouling Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Odyssey Triton Ablative Antifouling Paint\u003c\/h2\u003e\n\u003cp\u003eThe Pettit Odyssey Triton Ablative Antifouling Paint delivers exceptional tri-biocide multi season performance. Combining the reliability of Copper Thiocyanate, versatile organic boosting biocide Zinc Pyrithione, and the impressive strength of ECONEA. The ingredient combination Makes Odyssey Triton effective against all types of fouling found in even the harshest marine environments. Pettit is introducing a whole new level of performance while preventing build up and keeping underwater surfaces smooth.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pettt-hull-defense.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettt-hull-defense.jpg\" alt=\"pettt-hull-defense.jpg\" width=\"116\" height=\"130\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePettit Odyssey HD provides excellent antifouling protection and is backed by the industry's strongest limited warranty. The Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Odyssey HD offers the most dependable and trusted antifouling paint in the industry.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThree biocides provide unparalleled multi-season protection in the harshest environments\u003c\/li\u003e\n\u003cli\u003eMaximum fuel efficiency and reduced build-up\u003c\/li\u003e\n\u003cli\u003eMaximum protection against all types of marine growth\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eCovered by the enhanced HD (Hull Defense) 24 Month Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFlat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e400 ft²\/gallon @ 2 mils thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 minimum per season\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSold in Gallons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1299G Blue , 1899G Black, 1399G Green, 1699G Red, 1199G White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Odyssey Triton Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Odyssey Triton paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Odyssey Triton Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Odyssey Triton Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Odyssey Triton provides. (450 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Odyssey Triton has a coverage of 450 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Odyssey Triton Bottom Paint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Data Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush, Roller, or Airless or Conventional Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness Per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 Mils dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e400 sq²\/gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e50° F Min \/ 90°F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePettit 120 Brushing Thinner. Do not thin more than 10% (12 ounces per Gallon)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Times:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eMinimum recoat time is 4 hours @ 70°F. Minimum time between final coat and launching is 16 hours. Under cold or damp conditions increase dry times by 50%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit-Odyssey-Triton-Application\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/odyssey-triton-application.jpg\" alt=\"Pettit-Odyssey-Triton-Application\" width=\"600\" height=\"339\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the previous coating is in good condition thoroughly sand with 80-grit sandpaper, then clean with the 120 Brushing Thinner solvent to remove residue. Apply two finish coats of the Odyssey Triton.\u003c\/li\u003e\n\u003cli\u003eIf the previous coating is soft or in poor condition remove to the bare surface by sanding or using a paint or varnish remover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer or 120 Brushing Thinner. Sand thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash the sanded surface with 185 Ablative Thinner or 120 Brushing Thinner to remove sanding residue. Then apply two or three coats of the Odyssey Triton following application instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo eliminate the sanding operation, prep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit 95 Dewaxer only. Then apply one thin coat of Pettit 6998 Skip-Sand Primer or 6999 Sandless Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three coats of Odyssey Triton.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Aluminum:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAbrade the surface to clean, bright metal by sanding, wire-brushing, or sandblasting. Blow off or vacuum sanding residue so that surface is clean and dry.\u003c\/li\u003e\n\u003cli\u003eThen immediately apply two coats of Pettit Aluma Protect 4400\/4401 Aluminum Epoxy Primer. Let dry for two hours and then apply two coats of Pettit Protect Epoxy Primer 4700\/4701 while following instructions.\u003c\/li\u003e\n\u003cli\u003eAfter the second coat of Pettit Protect wait 5-8 hours (no more or less) and apply the first coat of Odyssey Triton. Follow up with one or two additional coats of Odyssey Triton.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUnderwater Metal Parts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply Pettit Protect 4700\/4701. Follow surface preparation instructions and priming underwater metal running gear specification via Pettit Protect label or product data sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098117374086,"sku":"PET-1899G","price":479.36,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098117406854,"sku":"PET-1699G","price":479.36,"currency_code":"USD","in_stock":true},{"title":"White \/ Gal","offer_id":43098117439622,"sku":"PET-1199G","price":479.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Odyssey-Triton__98648.jpg?v=1770171321"},{"product_id":"pacifica-plus-w-biolux","title":"Interlux Pacifica Plus Antifouling Marine Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Pacifica Plus Antifouling Marine Paint with Biolux\u003c\/h2\u003e\n\u003cp\u003eInterlux Pacifica antifouling paint is specially designed to battle slime and contains Econea to help ward off barnacles, algae, and other underwater organisms. It is formulated with a dual biocide antifouling that uses Biolux Slime Blocking technology.\u003c\/p\u003e\n\u003cp\u003eInterlux Pacifica is easy to apply with a roller or brush. The overall performance and protection provided by Interlux Pacifica are directly related to the amount of antifouling paint applied. A thin layer may lead to premature fouling. A thicker layer will protect your boat much longer.  Interlux Pacifica is safe to use for both fresh and saltwater applications and is safe for all boats including aluminum, wood, fiberglass, and steel.\u003c\/p\u003e\n\u003cp\u003eInterlux Pacifica uses Econea technology, which is a copper-replacement technology. It allows antifouling performance to work at very low concentrations.  It is safer for use on aluminum, unlike its Copper Oxide counterparts. Once emitted from paint film, it breaks down quickly. It is formulated to protect against more severe organisms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCopper-free bottom paint\u003c\/li\u003e\n\u003cli\u003eContains Econea™ to control shell growth and Biolux® Slime-Blocking technology\u003c\/li\u003e\n\u003cli\u003eClean, crisp, bright colors\u003c\/li\u003e\n\u003cli\u003eHigh solids, reduced solvent emissions\u003c\/li\u003e\n\u003cli\u003eFast dry, low odor\u003c\/li\u003e\n\u003cli\u003ePolishing action for improved fuel efficiencies, which equals reduced Carbon Dioxide and Sulfur Dioxide into the air\u003c\/li\u003e\n\u003cli\u003eSuitable for all substrates, including aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLow Sheen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Area:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBelow the waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e330 g\/lt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Size: \u003c\/strong\u003e1 US Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYBB260-Blue, YBB262-Red, YBB263-Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003e\u003cstrong\u003eInterlux Special Thinner:\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eFor thinning - do not exceed 10% per volume\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow To Apply Interlux Pacifica Plus\u003c\/h2\u003e\n\u003cp\u003eInterlux Pacifica Plus is suitable for use on all boats including fiberglass, aluminum, wood, and steel. This antifouling paint can be applied by airless spray, brush, conventional spray, or roller. Only apply Pacifica Plus to clean, dry, and properly prepared surfaces only. All metal surfaces must be primed before applying Pacifica Plus.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Airless Spray, Brush, Conventional Spray, Roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDry Film Thickness per Coat: \u003c\/strong\u003e2 mils (3 mils wet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 528 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e41°F Min. \/ 95°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSpecial Thinner 216\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e9 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePREVIOUSLY PAINTED SURFACES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIn Good Condition with Pacifica or Trilux 33\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 (grit) grade paper. Wipe with Special Thinner 216.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf these coatings are more than a year old, wet sand the surface with 80 (grit) grade paper to a clean, firmly attached surface. Wipe down with Special Thinner 216.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eApply 1-2 coats of TBT Sealer.\u003c\/li\u003e\n\u003cli\u003eNon-TBT Copolymers: Apply 1 coat of Primocon.\u003c\/li\u003e\n\u003cli\u003eHard Antifoulings: Sand surface with 80 grade (grit) paper to a clean firmly attached surface, wipe with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eApply Pacifica Plus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eIn Poor Condition\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove antifouling paint in poor condition with Interstrip Semi-Paste 299E.\u003c\/li\u003e\n\u003cli\u003eSand and wipe clean with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by scrubbing the surface thoroughly with a stiff brush using soap and water to remove loose dirt and contamination. Flush with fresh water to remove the soap residue.\u003c\/li\u003e\n\u003cli\u003eRemove mold release wax using one of the following methods:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eApply Fiberglass Surface Prep YMA601 or Low VOC Fiberglass Solvent Wash 202V with a maroon, 3M Scotch-Brite®  pad and scrub well.\u003c\/li\u003e\n\u003cli\u003eFlush with fresh water or wipe off with a clean, wet cloth ensuring that no traces of Fiberglass Surface Prep or Low VOC Fiberglass Solvent Wash remain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eAn alternate method would be to dampen cheesecloth with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWipe thoroughly to remove all surface contamination and cleaners. Wipe off with a clean, dry rag before liquid dries.\u003c\/li\u003e\n\u003cli\u003eWipe only a few square feet at a time and change rags frequently.\u003c\/li\u003e\n\u003cli\u003eTo be certain the contamination has been removed, run water over the surface. If the water beads up or separates, repeat one of the above methods.\u003c\/li\u003e\n\u003cli\u003eWhen the water sheets off, all contamination has been removed.\u003c\/li\u003e\n\u003cli\u003eRepair all scratches, nicks and dings by sanding those areas with 80 grade (grit) paper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRemove sanding residue with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cli\u003eFill the repair areas with Interlux® Watertite Epoxy filler.\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eNo Sand System\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface as above. Apply one coat of Interlux Interprotect 2000E.\u003c\/li\u003e\n\u003cli\u003eWhen the Interprotect 2000E is thumbprint tacky apply the first coat of Pacifica Plus.\u003c\/li\u003e\n\u003cli\u003eApply the second coat of Pacifica Plus allowing the appropriate dry times between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSanding System\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface as above. Sand entire gel coat well with 80-grit sandpaper until a flat, matte finish is obtained.\u003c\/li\u003e\n\u003cli\u003eWipe surface clean. Repair imperfections with Interlux® Watertite (YAV135). Sand and wipe clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBARE WOOD:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grade (grit) paper. Clean with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eApply first coat reduced 10% with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Seam Compound Brown 30.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEL HULLS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContact the Interlux Technical Service Department at 1-800-468-7589 for full information.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBARE ALUMINUM:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast or sand with medium grade (grit) emery cloth to a bright metal finish and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Interprotect 2000E that has been thinned 15-20% with Reducing Solvent 2316N.\u003c\/li\u003e\n\u003cli\u003eApply the Interprotect the same day as blasting or sanding. FACTORY FINISHED ALUMINUM Prime with Primocon.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAt least 2 coats should be applied. Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges.\u003c\/li\u003e\n\u003cli\u003eApply to clean, dry, properly prepared surfaces only. Surface must be dry and clean, and free from grease, loose paint etc.\u003c\/li\u003e\n\u003cli\u003eDo not apply Pacifica Plus directly to aluminum. All metal surfaces must be primed with Interprotect 2000E\/2001E or Primocon.\u003c\/li\u003e\n\u003cli\u003eDo not apply direct to tin-based paint such as Micron® 33, Micron® 44 or Tri-Lux® IIT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003eAirless Spray\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003ePressure: 170-204 bar\/2500-3000 psi. Tip Size: 0.53 mm\/0.021\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003eConventional Spray\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003ePressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 10-15 psi (pot pressure). Tip Size: 1.8-2.2 mm\/0.071-0.087\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eDo not exceed 10% maximum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/YBB260_Pacifica_Plus_Blue_MSDS.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"48\" height=\"46\"\u003e\u003cspan\u003e\u003cstrong\u003eClick Here to Download Interlux Pacifica Plus MSDS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pacifica_Plus_Technical_Datasheet.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"48\" height=\"46\"\u003eClick here to Download Interlux Pacifica Plus Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Gal","offer_id":43098117963910,"sku":"ILX-YBB-263G","price":283.12,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098117996678,"sku":"ILX-YBB-260G","price":283.12,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43103292784774,"sku":"ILX-YBB-262G","price":283.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/PacificaPlus__99515.jpg?v=1770170998"},{"product_id":"premium-hrt-1","title":"Pettit HRT Premium Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Premium HRT Multi-Season Antifouling Boat Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eDiscover the superior protection of Pettit HRT Premium Bottom Paint, crafted to deliver advanced antifouling performance. This high-quality paint provides exceptional coverage and long-lasting defense against all types of marine growth. Pettit HRT premium reviews consistently praise its durability and effectiveness, making it a top choice among boaters seeking reliable hull protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHRT: Hybrid Reactive Technology\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efeatures high density biocide utilization to maximize effectiveness, along with film modifiers to reduce yearly build-up, maintain color consistency, and lower weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in gallons\u003c\/li\u003e\n\u003cli\u003eMulti-Season protection\u003c\/li\u003e\n\u003cli\u003eHigh-copper hybrid protection\u003c\/li\u003e\n\u003cli\u003eSmooth durable polishing finish\u003c\/li\u003e\n\u003cli\u003eSuperior coverage over most bottom paints\u003c\/li\u003e\n\u003cli\u003eEqually effective on both power and sail boats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1219 Blue, 1319 Green, 1619 Red, 1819 Black\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr width=\"100%\" size=\"2\" align=\"center\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow Much Pettit HRT Premium Do I Need for My Boat?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"141\" width=\"600\" alt=\"Pettit Premium HRT Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" title=\"Pettit Premium HRT Application Chart\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Odyssey HD provides. (500 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cdiv align=\"center\"\u003e\u003chr width=\"100%\" size=\"2\" align=\"center\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Pettit HRT Premium Bottom Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePettit HRT Premium is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 5-10% using\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/truewindmarine.com\/products\/special-thinner\" target=\"_blank\" rel=\"noopener\"\u003e120 Brushing Thinner\u003c\/a\u003e. Pettit HRT Premium has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFlat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e500 ft2\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 minimum per season with additional coat at waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.75 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.5 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003ca href=\"https:\/\/truewindmarine.com\/products\/special-thinner\" target=\"_blank\" title=\"Pettit Special Thinner\" rel=\"noopener\"\u003e120 Brushing Thinner\u003c\/a\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Do not apply Pettit HRT Premium on aluminum hulls or outdrives**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor old hard and ablative bottom paints, begin by thoroughly wiping down the surface with 120 Brushing Thinner. Pay extra attention to waterline areas. Then sand the painted surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eOld tin or copper copolymers, or Teflon-based antifouling paints should be sanded thoroughly with 80 grit sandpaper to remove the chalky outer surface. Wipe clean, then apply one coat of Pettit HRT Premium.\u003c\/li\u003e\n\u003cli\u003eSoft, sloughing antifouling paints should be removed before applying Premium HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with\u003cspan\u003e \u003c\/span\u003e92 Bio-Blue Hull Surface Prep\u003cspan\u003e \u003c\/span\u003eor de-waxed several times with\u003cspan\u003e \u003c\/span\u003ePettit D-95 Dewaxer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Sanding Method (1):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePrep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit D95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip- Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of Premium HRT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Sanding Method (2):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThoroughly clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a coarse Scotch-Brite pad in a swirling motion. Thoroughly rinse all residue from the surface and let dry. Then apply one coat of\u003cspan\u003e \u003c\/span\u003ePettit-Protect High Build Epoxy Primer. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of Pettit HRT Premium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBare wooden hulls should be sanded thoroughly with 80 grit sandpaper and wiped clean of sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of\u003cspan\u003e \u003c\/span\u003e6627 Tie-Coat Primer\u003cspan\u003e \u003c\/span\u003ethinned 25% with\u003cspan\u003e \u003c\/span\u003e97 Epoxy Thinner\u003cspan\u003e \u003c\/span\u003edirectly to the bare wood. Allow 4 hours to dry.\u003c\/li\u003e\n\u003cli\u003eApply two un-thinned coats of Pettit HRT Premium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt; remove loose rust and scale from the metal surface.\u003c\/li\u003e\n\u003cli\u003eScrape, sandblast or wire brush to 2-3 mil profile. Blow off residue.\u003c\/li\u003e\n\u003cli\u003eApply one or two coats of\u003cspan\u003e \u003c\/span\u003ePettit 6980 Rustlok Primer\u003cspan\u003e \u003c\/span\u003efollowed by two coats of\u003cspan\u003e \u003c\/span\u003ePettit 4700\/4701 High Build Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with Pettit HRT Premium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUnderwater Metal Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent clean then abrade to clean bright metal by sanding with 60-80 grit sandpaper, sandblasting or wire brushing.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of\u003cspan\u003e \u003c\/span\u003eProp Coat Barnacle Barrier 1792.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin coats of Pettit HRT Premium bottom paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit-Premium-HRT-Antifouling-Paint-Application-Instructions.pdf?v=1770928164\" title=\"Pettit Premium HRT Antifouling Paint Application Instructions\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg height=\"55\" width=\"57\" alt=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" title=\"pdficon.png\" class=\"__mce_add_custom__\"\u003e\u003cstrong\u003eClick to Download Pettit HRT Premium Antifouling Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg class=\"warningImg\" alt=\"warning sign\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"productWarning\" href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098111508614,"sku":"PET-1819G","price":188.43,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098111541382,"sku":"PET-1319G","price":188.43,"currency_code":"USD","in_stock":false},{"title":"Red \/ Gal","offer_id":43098111574150,"sku":"PET-1619G","price":188.43,"currency_code":"USD","in_stock":false},{"title":"Blue \/ Gal","offer_id":43103304319110,"sku":"PET-1219G","price":188.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Premium_HRT_Bottom_Paint__47671.jpg?v=1770170659"},{"product_id":"rubberized-deck-coating","title":"Tuff Coat Rubberized Non-Skid Deck Coating","description":"\u003ch2 class=\"classyunicodedone\"\u003eTuff Coat Rubberized Non-Skid Marine Non Submersible Deck Coating - Gallon\u003c\/h2\u003e\n\u003cp\u003eTuff Coat Rubberized Non-Skid Deck Coating provides durable protection for boats, docks, and ramps using recycled rubber crumb aggregate in a polyurethane formula. This VOC-free coating covers 40-45 square feet per gallon and can be applied by spray, brush, or roller. It creates a waterproof, non-slip surface that resists UV rays, chemicals, acids, solvents, and impacts while reducing noise on aluminum boats. Available in 17 colors including whites, grays, blues, and safety yellow, it dries to a matte finish that's easy to clean. Requires Tuff Coat Primer for proper adhesion and works best between 40°F and 120°F.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage - 1 Gallon of Tuff Coat covers approximately 40-45 square feet\u003c\/li\u003e\n\u003cli\u003eSurfaces covered with Tuff Coat Rubberized Deck Coating must be primed with Tuff Coat Primer (See note below)\u003c\/li\u003e\n\u003cli\u003eHelps to prevent slipping and injury\u003c\/li\u003e\n\u003cli\u003eDeadens and absorbs noise\u003c\/li\u003e\n\u003cli\u003eNOTE: due to the nature of the rubberized ‘crumbs’, the paint texture may vary when applied\u003c\/li\u003e\n\u003cli\u003eNon-toxic and environmentally friendly(no VOC's)\u003c\/li\u003e\n\u003cli\u003eConsists of recycled rubber crumb aggregate-non abrasive\u003c\/li\u003e\n\u003cli\u003eUV resistant pigments \u0026amp; stabilizers enhance protection\u003c\/li\u003e\n\u003cli\u003eTuff Coat Rubberized Deck Coating protects surfaces and decks against chemicals such as acids, solvents, fuels, chlorine, salts, etc.\u003c\/li\u003e\n\u003cli\u003eResists impact\u003c\/li\u003e\n\u003cli\u003eWaterproofs wood decking\u003c\/li\u003e\n\u003cli\u003eCan be sprayed, brushed, or roller applied, easy for the beginner\u003c\/li\u003e\n\u003cli\u003eDries to a quick, easy to clean finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eColors Available \u003c\/p\u003e\n\u003cp\u003eUT-112 Medium Blue, UT-110 Light Blue, UT-118 Waterpark Blue, UT-119 White, UT-109 Keywest Sand, UT-116 Sand, UT-117 Tan, UT-105 Dark Brown, UT-114 Olive, UT-108 Green, UT-107 Dark Green, UT-115 Red, UT-102 Brick Red, UT-111 Light Grey, UT-106 Dark Grey, UT-101 Black, UT-221 Safety Yellow\u003c\/p\u003e\n\u003ctable border=\"0\" cellspacing=\"15\" cellpadding=\"15\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features Eco-Friendly\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-earth.png\" alt=\"Tuff Coat Features Eco-Friendly\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features Recycled Rubber\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-recycle.png\" alt=\"Tuff Coat Features Recycled Rubber\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features UV Resistant\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-step.png\" alt=\"Tuff Coat Features UV Resistant\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features No Mixing\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-one.png\" alt=\"Tuff Coat Features No Mixing\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Features DIY Application\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/tuff-coat-icons-bg-roller.png\" alt=\"Tuff Coat Features DIY Application\" width=\"75\" height=\"75\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWater-Based \u0026amp; Eco Friendly\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eRecycled High-Grip Rubber Granules\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUV \u0026amp; Chemical Resistant\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSingle Component - No Mixing\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSimple Do-it-Yourself Application\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemp: 40°F min. - 120°F max. (air, surface, \u0026amp; material)\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 85% maximum\u003c\/li\u003e\n\u003cli\u003eMethod:\u003c\/li\u003e\n\u003cli\u003eRoll – TUFF-Coat® Rollers\u003c\/li\u003e\n\u003cli\u003eSpray – Superior Hopper Gun or Texture Sprayer\u003c\/li\u003e\n\u003cli\u003eFinish: Matte finish\u003c\/li\u003e\n\u003cli\u003eAppearance: Textured colored liquid\u003c\/li\u003e\n\u003cli\u003eRecommended Spread Rate:\u003c\/li\u003e\n\u003cli\u003eWet mils: 50-60\u003c\/li\u003e\n\u003cli\u003eDry mils: 35-40\u003c\/li\u003e\n\u003cli\u003eCoverage: 40-45 Sq. Ft. in 2 coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDrying Schedule\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(20 mils wet @50% RH, 72ºF)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo touch: Approx. 1 hour\u003c\/li\u003e\n\u003cli\u003eTo top coat: Approx. 1-2 hours\u003c\/li\u003e\n\u003cli\u003eTo cure: Approx. 24hrs-5 days for a full chemical cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRoller, Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e40°F or higher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 – Light Traffic | 3 – Heavy Traffic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Tuff Coat Rubberized Deck Coating\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Tuff Coat Application Steps\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/application-graphi.jpg\" alt=\"Tuff Coat Application Steps\" width=\"600\" height=\"181\"\u003e\u003c\/p\u003e\n\u003cp\u003ePrior to applying Tuff Coat, stir thoroughly before applying and stir periodically to maintain aggregate in suspension. Dilute the product with clean water\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eonly\u003c\/strong\u003e. A dilution of 10% will reduce the solids within the product by the same amount. Avoid “cracking”: Do not allow Tuff Coat Rubberized Deck Coating to pool and do not apply very thick coats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIt is recommended that you perform a test patch to ensure adhesion before applying fully.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConcrete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMust be fully cured.\u003c\/li\u003e\n\u003cli\u003eIf a concrete surface has a porous texture, no further surface preparation is necessary.\u003c\/li\u003e\n\u003cli\u003eIf the concrete surface is not porous, then acid etching, sanding, or shot blasting is necessary. Make sure to use a light acid etch and remove all remaining acid with soap, water, and a scrub brush.\u003c\/li\u003e\n\u003cli\u003eConcrete should be completely clean and dry.\u003c\/li\u003e\n\u003cli\u003ePatch all imperfections, cracks, etc. with concrete patch filler and flexible joint fillers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euse silicone products, as Tuff Coat Rubberized Deck Coating will not adhere to silicone.\u003c\/li\u003e\n\u003cli\u003ePrime with CP-10 as per instructions on the label. Once the primer has properly cured, apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePainted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressively roughen the surface by sanding with 36 or 40 grit sandpaper. The surface must be rough for proper adhesion.\u003c\/li\u003e\n\u003cli\u003eClean the surface of all oils, grease, dirt, silicone, and other contaminants. Leave no residue.\u003c\/li\u003e\n\u003cli\u003eInspect for any imperfections or delamination of previously painted surfaces.\u003c\/li\u003e\n\u003cli\u003ePrime with CP-10 then apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAsphalt\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface by pressure-washing.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is completely dry before applying asphalt primer.\u003c\/li\u003e\n\u003cli\u003eNext, apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel and Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare metal substrates should be appropriately primed after being treated for rust or removal of old paint.\u003c\/li\u003e\n\u003cli\u003eAll smooth metal should be cleaned, and aggressively roughed by sanding with 36 or 40 grit sandpaper or by acid etch. Acid etch is recommended.\u003c\/li\u003e\n\u003cli\u003eClean and dry surface.\u003c\/li\u003e\n\u003cli\u003ePrime with MP-10 then apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRubber\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 36 or 40 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eClean and dry surface.\u003c\/li\u003e\n\u003cli\u003ePrime with rubber primer then apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlywood, Lumber, and Treated Lumber\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew lumber needs no sanding. Old lumber requires sanding with 36 or 40 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove any peeling, cracking, or chipping paint, varnish, or sealer.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is clean and dry before priming with CP-10.\u003c\/li\u003e\n\u003cli\u003eFinish by applying Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo ensure good adhesion, first sand the surface aggressively using 36 or 40 grit paper to ensure the removal of all gloss from the substrate.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is free of waxes and other protective additives.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface is clean and dry before priming with CP-10.\u003c\/li\u003e\n\u003cli\u003eThe final step will be to apply Tuff Coat Rubberized Deck Coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse Ultra TUFF Texture Rollers. The roller must be capable of lifting the rubber crumb within the product to the surface.\u003c\/li\u003e\n\u003cli\u003ePour product into the paint tray and be sure to completely saturate the roller.\u003c\/li\u003e\n\u003cli\u003eApply the first coat as a thin coat. Resaturate roller after each pass. Make 4-5 consecutive passes in the same direction, with each pass right next to the other.\u003c\/li\u003e\n\u003cli\u003eWhen applying, roll in one direction first, then roll in the opposite direction.\u003c\/li\u003e\n\u003cli\u003eOnce an area is covered, run the roller very lightly over it to ensure an even distribution of color and the rubber crumb.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpray\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse only the spray gun recommended or supplied by Tuff Coat.\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eSuperior\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ebrand “Spraying-Mantis” handheld Hopper gun, or equivalent.\u003c\/li\u003e\n\u003cli\u003eSpray water to prime.\u003c\/li\u003e\n\u003cli\u003eHolding the gun approximately 12-24 inches away from the surface, spray an even, light coat over the entire surface.\u003c\/li\u003e\n\u003cli\u003eKeep the spray gun at a 90 degree angle to the surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInformation has been sourced from Ultra TUFF and Ultra TUFF Marine Water-Based Non-skid Polyurethane Coatings Application Instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Tuff-Coat Marine","offers":[{"title":"Black \/ Gal","offer_id":43098112688262,"sku":"TUF-UT-101","price":84.28,"currency_code":"USD","in_stock":false},{"title":"Dark Brown \/ Gal","offer_id":43098112721030,"sku":"TUF-UT-105","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Dark Gray \/ Gal","offer_id":43098112753798,"sku":"TUF-UT-106","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Keywest Sand \/ Gal","offer_id":43098112786566,"sku":"TUF-UT-109","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Light Blue \/ Gal","offer_id":43098112819334,"sku":"TUF-UT-110","price":93.07,"currency_code":"USD","in_stock":true},{"title":"Light Gray \/ Gal","offer_id":43098112852102,"sku":"TUF-UT-111","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Olive \/ Gal","offer_id":43098112884870,"sku":"TUF-UT-114","price":84.28,"currency_code":"USD","in_stock":false},{"title":"Sandtone \/ Gal","offer_id":43098112917638,"sku":"TUF-UT-116","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Tan \/ Gal","offer_id":43098112950406,"sku":"TUF-UT-117","price":84.28,"currency_code":"USD","in_stock":true},{"title":"Waterpark Blue \/ Gal","offer_id":43098112983174,"sku":"TUF-UT-118","price":113.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Tuff_Coat__36524.jpg?v=1770149050"},{"product_id":"sea-hawk-af33","title":"Sea Hawk AF33 Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk AF33 Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk AF33 Bottom Paint is a harder ablative antifouling paint that yields a more durable finish. This premium, multi-season paint is suitable for vessels of all types and is the choice of many captains of workboats, day sailers, and cruising vessels. Seahawk AF33 Bottom Paint has 33% Cuprous Oxide, the highest grade available, resulting in exceptional multi-season protection. Sea Hawk's AF33 delivers multi-season protection at a single-season price.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExceptional value multi-season coating\u003c\/li\u003e\n\u003cli\u003eHarder self-polishing ablative finish\u003c\/li\u003e\n\u003cli\u003eHighest grade of cuprous oxide available\u003c\/li\u003e\n\u003cli\u003eConsistent viscosity, providing better flow and rolling ability\u003c\/li\u003e\n\u003cli\u003eLloyd's Register certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSemi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e359 sq. ft.\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e398 grams\/liter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Content:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e33.6%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e3345-Black, 3342-Blue, 3330-Dark Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 US Gallon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/sea-hawk-tuff-stuff-white-epoxy-primer\/\"\u003e\u003cstrong\u003eSea Hawk Tuff Stuff Epoxy Primer:\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ePrimer for bare fiberglass applications.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/sea-hawk-wax-n-grease-killer\/\"\u003e\u003cstrong\u003eSea Hawk Wax n Grease Killer\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWax remover for bare fiberglass applications.\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Sea Hawk AF33 Bottom Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSea Hawk AF33 Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using Sea Hawk 2053. Sea Hawk AF33 has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSemi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e: 359 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Bursh, Rolling, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness\u003c\/strong\u003e: 4.5 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness\u003c\/strong\u003e: 2.5 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf necessary maximum 10% with Sea Hawk 2030, or Sea Hawk 2035\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"3\" cellpadding=\"3\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDrying Time\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e  \u003cstrong\u003eSubstrate Temp\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eTouch Dry\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eOvercoat Time (Min)\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eOvercoat Time (Max)\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eLaunch\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  73°F\u003c\/td\u003e\n\u003ctd\u003e  2 hours\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  Not critical\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  95°F\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  Not critical\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation and Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePaint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material. Be sure to apply in good weather when air and surface temperatures are above 50°F. For optimum application properties, bring material to 70-80°F temperature range prior to mixing and application.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces - Known Compatibility of Existing Paint\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint, dirt, grease, or any other surface contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, or scuff with a 3M Scotch-Brite 7447 pad scrubbing thoroughly. Remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply a minimum of two coats of Sea Hawk AF33.\u003c\/li\u003e\n\u003cli\u003eAllow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003cli\u003eFor commercial marine applications, a 3rd coat can be applied at the waterline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces - Unknown Compatibility of Existing Paint\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint, dirt, grease, or any other surface contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, or scuff with a 3M Scotch-Brite 7447 pad scrubbing thoroughly. Remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier Coat Primer, sHAWKocon or 1283 Island Primer.\u003c\/li\u003e\n\u003cli\u003eApply a minimum of two coats of Sea Hawk AF33.\u003c\/li\u003e\n\u003cli\u003eAllow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003cli\u003eFor commercial marine applications, a 3rd coat can be applied at the waterline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces in Poor Condition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eStrip paint with Sea Hawk 1280 Marine Paint Stripper, or by sanding or commercial blast.\u003c\/li\u003e\n\u003cli\u003eRefer to Bare Fiberglass application guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIt is important that all contaminants such as grease, oil, wax, salt, or other foreign material are completely removed.\u003c\/li\u003e\n\u003cli\u003eScrub the surface with a detergent soap and stiff bristle brush.\u003c\/li\u003e\n\u003cli\u003eFollow\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eone of\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe two steps below to de-wax the surface.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean and de-wax fiberglass hull with S-80 Wax n' Grease Killer solvent-based de-wax. Saturate cheesecloth rag and wipe thoroughly to remove any cleaner and contaminants. Remove residue before it dries.\u003c\/li\u003e\n\u003cli\u003eApply S-90 De-Wax Etch \u0026amp; Cleaner with a maroon 3M Scotch-Brite pad, scrubbing thoroughly. Do not allow the cleaner to dry on the surface. Remove by flushing with water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRinse the entire surface with water and check for any beading on the surface. This will indicate that wax is still present.\u003c\/li\u003e\n\u003cli\u003eIf necessary, repeat the de-wax step again until the surface is contaminant-free.\u003c\/li\u003e\n\u003cli\u003eFollow one of the systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Premium Blister Protection System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRewash with S-80 Wax and Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner.\u003c\/li\u003e\n\u003cli\u003eSeal the surface with 2-3 coats of Tuff Stuff Primer. Follow Tuff Stuff's Application Guidelines.\u003c\/li\u003e\n\u003cli\u003eApply a minimum of two coats of Seahawk AF33.\u003c\/li\u003e\n\u003cli\u003eAllow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003cli\u003eFor commercial marine applications, a 3rd coat can be applied at the waterline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper. Remove any residue.\u003c\/li\u003e\n\u003cli\u003eApply a minimum of two coats of Seahawk AF33.\u003c\/li\u003e\n\u003cli\u003eAllow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003cli\u003eFor commercial marine applications, a 3rd coat can be applied at the waterline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eWood Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand the wood surface with 80 grit sandpaper. Remove sanding dust with Sea Hawk S-90 Cleaner.\u003c\/li\u003e\n\u003cli\u003eAllow to dry and apply the first coat of Seahawk AF33 Bottom Paint.\u003c\/li\u003e\n\u003cli\u003eReduce the first coat (only) 20% with Sea Hawk 2033 Thinner to maximize surface penetration.\u003c\/li\u003e\n\u003cli\u003eApply seam compound if needed; allow to dry according to the product label.\u003c\/li\u003e\n\u003cli\u003eApply two more coats of Seahawk AF33 without any thinner reduction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor all other application information, click below to download the Sea Hawk AF33 Application Guide. All information above is sourced from Sea Hawk's AF33 Technical Data Sheet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea_Hawk_Mission_Bay_App_Guide.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"39\" height=\"37\"\u003e\u003cstrong\u003eClick here to download Sea Hawk AF33 Bottom Paint Application Guide\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098114424966,"sku":"S-H-3345GL","price":171.5,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098114457734,"sku":"S-H-3342GL","price":171.5,"currency_code":"USD","in_stock":false},{"title":"Dark Blue \/ Gal","offer_id":43103254642822,"sku":"S-H-3330GL","price":171.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_AF33_Bottom_Paint__84530.jpg?v=1770148919"},{"product_id":"sea-hawk-biocop-tf","title":"Sea Hawk Biocop TF Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk Biocop TF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk's Biocop TF Bottom Paint is a multi-season, self-polishing antifouling paint that provides maximum fouling protection. Bicop TF was developed as an alternative to tin-based antifouling paints to stand up to the harshest marine environments. The new Dual biocide technology and groundbreaking polymer binder system, PL3, produces a biocide that leaves no harmful effects on the environment. Safe for salt or fresh water on boats of all sizes, Biocop TF is a top performer among bottom paints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerforms in fresh or saltwater\u003c\/li\u003e\n\u003cli\u003eMulti-Season performance\u003c\/li\u003e\n\u003cli\u003eAdvanced dual-biocide PL3 release technology\u003c\/li\u003e\n\u003cli\u003eHarder self polishing boosted ablative antifoulant for longer life\u003c\/li\u003e\n\u003cli\u003eApproved for vessels of all sizes\u003c\/li\u003e\n\u003cli\u003eLloyd's Register certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Sea Hawk Biocop TF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk Biocop TF Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using water. Biocop TF has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e:  320 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Brush, Roller, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness\u003c\/strong\u003e: 3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness\u003c\/strong\u003e: 5.0 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness\u003c\/strong\u003e: 2.2 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp\u003c\/strong\u003e: 50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner\u003c\/strong\u003e: If necessary, maximum 10% with Sea Hawk 2033, 2035\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSurface Preparation and Application\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKnown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply minimum 2 coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eUnknown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003ePoor condition of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/li\u003e\n\u003cli\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Sanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of contaminants.\u003c\/li\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Biocop TF. Apply first coat thinned 20% and let dry overnight.\u003c\/li\u003e\n\u003cli\u003eApply two more coats allowing 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel\/Aluminum Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Based Antifoulant Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.\u003c\/li\u003e\n\u003cli\u003eSeal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF, allow 3-6 hours between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper-Free Antifouling Application for Aluminum Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish. \u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF, allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Sea Hawk Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"41\" height=\"40\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Mission_Bay_App_Guide.pdf?v=1771443386\" target=\"_blank\"\u003eClick Here to Download Sea Hawk Biocop TF Application Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea-Hawk-Paint-Compatibility-Chart.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"41\" height=\"40\"\u003e\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea-Hawk-Paint-Compatibility-Chart.pdf?v=1771443246\" target=\"_blank\"\u003eClick Here to Download Sea Hawk Bottom Paint Compatibility Char\u003c\/a\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea-Hawk-Paint-Compatibility-Chart.pdf\"\u003et\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098115244166,"sku":"S-H-1205-1GL","price":366.71,"currency_code":"USD","in_stock":true},{"title":"Light Blue \/ Gal","offer_id":43098115276934,"sku":"S-H-1202-1GL","price":366.71,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098115309702,"sku":"S-H-1201-1GL","price":366.71,"currency_code":"USD","in_stock":true},{"title":"Teal \/ Gal","offer_id":43098115342470,"sku":"S-H-1235-1GL","price":366.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Biocop_TF__17374.jpg?v=1770148847"},{"product_id":"sea-hawk-cukote","title":"Sea Hawk Cukote Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk Cukote Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk's Cukote Bottom Paint is a self-polishing ablative paint that provides multi-season protection. Cukote Bottom Paint has a high load of cuprous oxide that makes this formula a top performer even in the most severe fouling areas. Due to its ablative and self-polishing nature, there is no buildup of bottom paint over time. The underwater surface of your hull remains clean and smooth, making this an ideal bottom paint for fast moving vessels. The copolymer in Cukote can withstand removal from water without affecting its antifouling properties. Sea Hawk's Cukote is the premium self-polishing antifouling paint that has established the standard in the industry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-Hard, self-polishing ablative finish\u003c\/li\u003e\n\u003cli\u003eMulti-season performance\u003c\/li\u003e\n\u003cli\u003eRemoving boat from water does not affect antifouling properties\u003c\/li\u003e\n\u003cli\u003eEffective below the waterline on fiberglass, steel, and wood vessels\u003c\/li\u003e\n\u003cli\u003eNo TBT (organotin compounds)\u003c\/li\u003e\n\u003cli\u003e47.5% Cuprous oxide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish: \u003c\/strong\u003eSemi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Content: \u003c\/strong\u003e47.57%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC: \u003c\/strong\u003e398 grams\/liter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e346 sq. ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available: \u003c\/strong\u003e3445-Black, 3441-Red, 3442-Blue, 3434-Teal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size: \u003c\/strong\u003e1 US Gallon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Sea Hawk Cukote Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk Cukote Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using water. Cukote has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSemi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e  320 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBursh, Rolling, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5.0 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.2 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMaximum 10% Sea Hawk 2031 Reducer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"3\" cellpadding=\"3\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDrying Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e  \u003cstrong\u003eSubstrate Temp.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eTouch Dry\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMinimum Overcoat Time\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMinimum Launch Time\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  73°F\u003c\/td\u003e\n\u003ctd\u003e  2 hours\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  95°F\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSurface Preparation and Application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKnown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply minimum 2 coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eUnknown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003ePoor condition of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/li\u003e\n\u003cli\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSanding Method:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNon-Sanding Method:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of contaminants.\u003c\/li\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Cukote. Apply first coat thinned 20% and let dry overnight.\u003c\/li\u003e\n\u003cli\u003eApply two more coats allowing 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel\/Aluminum Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Based Antifoulant Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.\u003c\/li\u003e\n\u003cli\u003eSeal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote, allow 3-6 hours between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper-Free Antifouling Application for Aluminum Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish. \u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote, allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Sea Hawk Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea_Hawk_Mission_Bay_App_Guide.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"39\" height=\"38\"\u003eClick here to download Sea Hawk Cukote Bottom Paint Application Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea-Hawk-Paint-Compatibility-Chart.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"39\" height=\"38\"\u003eClick here to download Sea Hawk Bottom Paint Compatibility Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098115670150,"sku":"S-H-3445GL","price":274.5,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098115702918,"sku":"S-H-3442GL","price":274.5,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098115735686,"sku":"S-H-3441GL","price":274.5,"currency_code":"USD","in_stock":true},{"title":"Teal \/ Gal","offer_id":43098115768454,"sku":"S-H-3434GL","price":274.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Cukote_Bottom_Paint__95319.jpg?v=1770148773"},{"product_id":"sea-hawk-islands-44-tf","title":"Sea Hawk Islands 44 TF Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk Islands 44 TF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eThe Sea Hawk Islands 44 TF is an advanced tin-free, self-polishing antifouling bottom paint that keeps your hull bottom free of organic growth over multiple cruising seasons. Suitable for both sailing and motor yachts, Islands 44 TF dries to a glossy sheen which helps reduce drag yielding improved speed with less fuel consumption. This dual-biocide antifouling paint utilizes a high purity Cuprous Oxide combined with pharmaceutical-grade Econea to protect your hull against both hard and soft growth. The controlled release formulation ensures biocides are dispersed at a precise rate independent of water types. Islands 44 TF has high volume solids, maximizing surface coverage to yield reduced paint usage.\u003c\/p\u003e\n\u003cp\u003eSea Hawk Islands 44 TF's low VOC formulation complies with rigid limits set by the California Air Quality Management Board and offers a slim-resistant yacht finish with California-compliant VOC emissions and low copper leach rate. This paint provides boaters with a high-performance antifouling that is compatible with virtually every solvent-based bottom paint, including those containing tin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGloss finish\u003c\/li\u003e\n\u003cli\u003eTin-Free multi season performance\u003c\/li\u003e\n\u003cli\u003eEffective in fresh, brackish, and salt waters\u003c\/li\u003e\n\u003cli\u003ePremium quality raw materials and biocides\u003c\/li\u003e\n\u003cli\u003eEconea Biocide Fights both Hard and Soft growth\u003c\/li\u003e\n\u003cli\u003eHighest grade of cuprous oxide available to help keep barnacles away\u003c\/li\u003e\n\u003cli\u003eHigh solids volume content maximizes surface coverage, reducing application time\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually every solvent-based bottom paint, including those containing tin\u003c\/li\u003e\n\u003cli\u003e32.7% Cuprous Oxide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish: \u003c\/strong\u003eGloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume Solids:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e61%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids by Weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e82%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e300 grams per liter \/ 2.5 lbs. per gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Leach Rate:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5.98 Micrograms\/cm2\/Day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e228-408 sq. ft.\/gal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePack Size: \u003c\/strong\u003e1 US Gallon\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003c\/strong\u003e 1005TF-Black, 1002TF-Blue\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Sea Hawk Islands 44 TF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk Islands 44 TF Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using Sea Hawk 2053 Reducer. Islands 44 TF has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e:  228-408 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Bursh, Rolling, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness\u003c\/strong\u003e: 3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4.0-7.0 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.4-4.3 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSea Hawk 2053 Reducer (10% maximum)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDrying Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSubstrate Temp.\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTouch Dry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eLaunch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e77° F\u003c\/td\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003ctd\u003e1 hour\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003e12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95° F\u003c\/td\u003e\n\u003ctd\u003e1 hour\u003c\/td\u003e\n\u003ctd\u003e1 hour\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003e12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*The drying times above are based on 4-7 mils wet at 50% humidity\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSurface Preparation and Application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eKnown Compatibility of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply minimum 2 coats of Island 44 TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eUnknown Compatibility of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e \u003cstrong\u003ePoor condition of existing antifoulant\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/li\u003e\n\u003cli\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF. Allow 3-6 hours between coats and a minimum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eNon-Sanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of contaminants.\u003c\/li\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Island 44 TF. Apply first coat thinned 20% and let dry overnight. Apply two more coats allowing 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel\/Aluminum Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Based Antifoulant Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.\u003c\/li\u003e\n\u003cli\u003eSeal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF, allow 3-6 hours between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper-Free Antifouling Application for Aluminum Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF, allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Sea Hawk Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea_Hawk_Mission_Bay_App_Guide.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"38\" height=\"37\"\u003e\u003cstrong\u003eClick here to download Sea Hawk Islands 44 TF Bottom Paint Application Guide\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098116718726,"sku":"S-H-1005TFGL","price":404.93,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098116751494,"sku":"S-H-1002TFGL","price":404.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Islands_44_T_photo__94233.jpg?v=1770148704"},{"product_id":"sea-hawk-sharkskin","title":"Sea Hawk Sharkskin Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk Sharkskin Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eThe Sea Hawk Sharkskin is a traditional 45.2% copper-based hard-modified epoxy bottom paint. Made to aggressively combat all types of marine fouling including sea grass, green weed, barnacles, and other fouling organisms found in both salt and fresh water. Can be applied over most antifouling coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter color consistency for color matching\u003c\/li\u003e\n\u003cli\u003eHighest grade cuprous oxide available\u003c\/li\u003e\n\u003cli\u003eMost effective copper release rate\u003c\/li\u003e\n\u003cli\u003eConsistent viscosity means better flow and rolling ability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish: \u003c\/strong\u003eSemi-gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Content: \u003c\/strong\u003e45.2%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC: \u003c\/strong\u003e365 Grams\/liter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e320 sq. ft.\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available: \u003c\/strong\u003e6145-Black, 6142-Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size: \u003c\/strong\u003e1 US Gallon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Sea Hawk Sharkskin Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk Sharkskin Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using Sea Hawk 2053. Sharkskin has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e: 320 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, Rolling, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness\u003c\/strong\u003e: 5.0 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness\u003c\/strong\u003e: 3.1 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp\u003c\/strong\u003e: 50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner\u003c\/strong\u003e: If necessary maximum 10% with Sea Hawk 2033\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"3\" cellpadding=\"3\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDrying Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e  \u003cstrong\u003eSubstrate Temp\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eTouch Dry\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eOvercoating Time (Min)\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eLaunch\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  73°F\u003c\/td\u003e\n\u003ctd\u003e  2 hours\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  95°F\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation and Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKnown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply minimum 2 coats of Sharkskin. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eUnknown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of SHARKSKIN. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003ePoor condition of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/li\u003e\n\u003cli\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Sharkskin. Allow 3-6 hours between coats and a minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass Sanding Method\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Sharskin. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass Non-Sanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Sharkskin. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of contaminants.\u003c\/li\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Sharkskin. Apply first coat thinned 20% and let dry overnight.\u003c\/li\u003e\n\u003cli\u003eApply two more coats allowing 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel\/Aluminum Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast to near white or white metal SSPC-SP-10 or equivalent.\u003c\/li\u003e\n\u003cli\u003eRemove residue by brush or compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Based Antifoulant Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.\u003c\/li\u003e\n\u003cli\u003eSeal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Sharkskin, allow 3-6 hours between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper-Free Antifouling Application for Aluminum Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Sharkskin, allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Sea Hawk Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea_Hawk_Mission_Bay_App_Guide.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"41\" height=\"39\"\u003e\u003cstrong\u003eClick here to download Sea Hawk Sharkskin Bottom Paint Application Guide\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098117865606,"sku":"S-H-6145GL","price":207.85,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098117898374,"sku":"S-H-6142GL","price":207.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Sharkskin_Bottom_Paint__31381.jpg?v=1770148532"},{"product_id":"sea-hawk-tropikote","title":"Sea Hawk Tropikote Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk Tropikote Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eThe Sea Hawk Tropikote Bottom Paint is a top of the line hard antifouling bottom paint that contains over 75% cuprous oxide. The multi-season bottom paint combats aggressively all types of fouling and reduces hull maintenance with year round trouble free performance. Tropikote is suitable for any vessel and has superior adhesion to fiberglass, wood, and steel hulls. You can use this paint for over coating without the feat of lifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent viscosity means better flow and rolling ability\u003c\/li\u003e\n\u003cli\u003eBetter color consistency for color matching\u003c\/li\u003e\n\u003cli\u003eHighest copper content in the industry (75.8%)\u003c\/li\u003e\n\u003cli\u003eHighest quality grade of cuprous oxide available\u003c\/li\u003e\n\u003cli\u003eMay be used on fast or slow moving vessels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish: \u003c\/strong\u003eSemi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Content: \u003c\/strong\u003e75.8%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC: \u003c\/strong\u003e288 Grams\/liter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e320 sq. ft.\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available: \u003c\/strong\u003e2145-Black, 2142-Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size: \u003c\/strong\u003e1 US Gallon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Sea Hawk Tropikote Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk Tropikote Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using water. Tropikote has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e:  320 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Bursh, Rolling, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5.0 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.2 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp\u003c\/strong\u003e: 50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSea Hawk 2033 Paint Thinner (10% maximum)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"3\" cellpadding=\"3\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDrying Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e  \u003cstrong\u003eSubstrate Temp.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eTouch Dry\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eMin\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eMax\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eMinimum Launch\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  73°F\u003c\/td\u003e\n\u003ctd\u003e  2 hours\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  N\/A\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  95°F\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  N\/A\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSurface Preparation and Application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eKnown Compatibility of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply minimum 2 coats of Tropikote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eUnknown Compatibility of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Tropikote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePoor condition of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/li\u003e\n\u003cli\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush. Using either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Tropikote. Allow 3-6 hours between coats and a minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Tropikote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Sanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Tropikote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of contaminants.\u003c\/li\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Tropikote. Apply first coat thinned 20% and let dry overnight. Apply two more coats allowing 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel\/Aluminum Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Based Antifoulant Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.\u003c\/li\u003e\n\u003cli\u003eSeal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Tropikote, allow 3-6 hours between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper-Free Antifouling Application for Aluminum Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish. \u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Tropikote, allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Sea Hawk Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea_Hawk_Mission_Bay_App_Guide.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"38\"\u003eClick here to download Sea Hawk Tropikote Bottom Paint Application Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098111017094,"sku":"S-H-2145GL","price":364.72,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098111049862,"sku":"S-H-2142GL","price":364.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Tropikote_Bottom_Paint__29314.jpg?v=1770148236"},{"product_id":"skidless-compound","title":"Pettit Specialty Skidless Marine Compound","description":"\u003cp\u003e\u003cstrong\u003ePettit Specialty Skidless Marine Compound\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade of fine silicon oxide, Pettit Skidless Compound is added to topside paints to yield a non-skid deck surface. This additive may be mixed into paint or shaken over a wet freshly painted deck surface and allowed to dry. Once coat is dry, blow off excess and top-coat with final coat of topside paint.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Pint","offer_id":43098111213702,"sku":"PET-9900P","price":29.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Specialty_Skidless_Marine_Compound_photo__50820.jpg?v=1771379017"},{"product_id":"trinidad-hd","title":"Pettit Trinidad 75 Hard Antifouling Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Trinidad 75 Hard Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit Trinidad 75 Bottom Paint is an extremely effective hard antifouling paint for professional applicators. Trinidad 75 utilizes an extremely high load of cuprous oxide to combat even the most extreme fouling conditions. Its durable, hard modified epoxy finish has excellent adhesion and is highly abrasion resistant. Trinidad 75 utilizes fast dry technology so you can paint and launch in the same day. When left in the water, Trinidad 75 will provide years of dependable service.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pettt-hull-defense.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettt-hull-defense.jpg\" alt=\"pettt-hull-defense.jpg\" width=\"116\" height=\"130\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e Pettit Trinidad 75 provides excellent antifouling protection and is backed by the industry's strongest limited warranty. Pettit's Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Trinidad 75 offers the most dependable and trusted antifouling protection in the industry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProven track record of unparalleled performance\u003c\/li\u003e\n\u003cli\u003eDesigned for extreme fouling conditions with a high copper load\u003c\/li\u003e\n\u003cli\u003eLeft In the water, Trinidad 75 provides classic, year-round service\u003c\/li\u003e\n\u003cli\u003eFast dry technology = paint and launch same day\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: 1 US Gallon\u003c\/li\u003e\n\u003cli\u003eFinish: Flat\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: 1074FD Blue, 1079FD Special Black\u003c\/li\u003e\n\u003cli\u003eNumber of Coats Recommended: 2 minimum per season\u003c\/li\u003e\n\u003cli\u003eCoverage: 4450 ft2\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 329 grams\/liter\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 60.9%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\" target=\"_blank\"\u003ePettit Protect Epoxy Primer\u003c\/a\u003e - Primer for bare fiberglass applications\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-bio-blue-marine-hull-surface-prep-79179.html\" target=\"_blank\"\u003ePettit 92 Bio-Blue Hull Surface Prep\u003c\/a\u003e - For bare fiberglass applications\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Trinidad 75 Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Trinidad 75 paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Trinidad 75 Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Trinidad 75 Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Trinidad 75 provides. (450 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Trinidad 75 has a coverage of 450 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Trinidad 75 Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit Trinidad 75 Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap (maximum 3\/8\" nap) roller cover. Over-application will virtually assure inadequate coating performance. Mix paint thoroughly to ensure ingredients are evenly dispersed throughout the can. Follow all surface preparation instructions to ensure proper coating performance. Trinidad 75 should not be applied to aluminum hulls or outdrives.\u003c\/p\u003e\n\u003cp\u003eTrinidad 75 is heavily loaded with cuprous oxide; as a result, settling can occur. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Trinidad 75 Application\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/trinidad-75-application.jpg\" alt=\"Pettit Trinidad 75 Application\" width=\"600\" height=\"338\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e Brush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2 minimum per season\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 mils (3.6 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 450 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e 40°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003e120 Brushing Thinner (Max 10%)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"2\" cellpadding=\"2\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  2 HR\u003c\/td\u003e\n\u003ctd\u003e  8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  4 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003ctd\u003e 24 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTrinidad 75 can be applied over most aged hard antifouling coatings.\u003c\/li\u003e\n\u003cli\u003eIf previous paint is in good condition, sand painted surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eSolvent clean with 120 Brushing Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Trinidad 75.\u003c\/li\u003e\n\u003cli\u003eIf previous coating is soft or in poor condition, remove to the bare surface by sanding or using paint remover.\u003c\/li\u003e\n\u003cli\u003eProceed with appropriate bare system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or dewaxed several times with D-95 Dewaxer. Then proceed with one of the systems below:\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand hull thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cem\u003eNon-Sanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, dewax surface with 92 Bio-Blue Surface Prep using a course nylon scuff pad.\u003c\/li\u003e\n\u003cli\u003eRinse all residue from surface and let dry.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Pettit Protect Epoxy Primer 4700\/4701 following primer label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two or three coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarrier Coat\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrepare the fiberglass surface as mentioned above (sanding method).\u003c\/li\u003e\n\u003cli\u003eApply two to three coats of Pettit Protect Epoxy Primer per label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two or three coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply a coat of Trinidad 75 thinned 25% with Pettit 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eAllow an overnight dry then lightly sand and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt.\u003c\/li\u003e\n\u003cli\u003eRemove loose rust and scale from the metal surface by scraping or sandblasting.\u003c\/li\u003e\n\u003cli\u003eBlow off residue then apply one or two coats of Pettit 6980 Rustlok Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with two coats of Pettit 4700\/4701 Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eApply two or three finish coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not use Pettit Trinidad 75 on aluminum hulls and outdrives.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/PPettit-Trinidad-75-Application-Instruction.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"64\" height=\"62\"\u003e\u003cstrong\u003eClick to Download Pettit Trinidad 75 Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Blue \/ Gal","offer_id":43098111705222,"sku":"PET-1271G","price":299.95,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098228686982,"sku":"PET-1671G","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Trinidad-75__33338_593d6c1f-ed72-4aa2-8c65-10f9bff83d41.jpg?v=1770148089"},{"product_id":"toplac-plus","title":"Interlux Toplac Plus Marine Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Toplac Plus Marine Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux Toplac Plus delivers a hard, high-gloss polyurethane finish designed for topside applications above the waterline. This one-part marine paint features superior flow and leveling characteristics that produce smooth roller finishes without tipping. Apply it to hulls, decks, cabins, and trim using brush, roller, or spray methods. With coverage of 587 square feet per gallon, you'll need 2-3 coats for optimal protection. The formula works with single-part primers, enamels, and polyurethanes while offering excellent UV resistance. Available in bright, crisp colors that maintain their appearance in harsh marine environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHard, high gloss, one-part polyurethane finish\u003c\/li\u003e\n\u003cli\u003eExcellent flow and leveling characteristics\u003c\/li\u003e\n\u003cli\u003eSmooth Roller Finish with no Tipping required\u003c\/li\u003e\n\u003cli\u003eTopside paint - Recommended for use above true waterline\u003c\/li\u003e\n\u003cli\u003eFor use with single-part primers, enamels, or polyurethanes\u003c\/li\u003e\n\u003cli\u003eAvailable in a range of bright, crisp colors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller or spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 Minimum (only 1 may be needed for touch-up\/repair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e587 sq. ft\/gal per coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThinner\/Cleaner\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e2333N Reducing Solvent\u003c\/li\u003e\n\u003cli\u003e333 Brushing Thinner\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"\/products\/special-thinner\" target=\"_blank\"\u003e216 Special Thinner\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow To Apply Toplac Plus\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e:  Brush, Roller, Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDry Film Thickness per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1-1.5 mils (2-3 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e587 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e41°F Min. \/ 95°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinning:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAdd 10% 2333N reducing solvent for brushes and 216 Special Thinner for spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e333 Brushing Liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  Touch Dry\u003cbr\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  Overcoating Substrate\u003cbr\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  95°F\u003c\/td\u003e\n\u003ctd\u003e  1 Hour\u003c\/td\u003e\n\u003ctd\u003e  6 Hour Min \/ 24 Hour Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  77°F\u003c\/td\u003e\n\u003ctd\u003e  2 Hours\u003c\/td\u003e\n\u003ctd\u003e  8 Hour Min \/ 2 Day Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  59°F\u003c\/td\u003e\n\u003ctd\u003e  3 Hours\u003c\/td\u003e\n\u003ctd\u003e  16 Hour Min \/ 3 Day Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  41°F\u003c\/td\u003e\n\u003ctd\u003e  6 Hours\u003c\/td\u003e\n\u003ctd\u003e  24 Hour Min \/ 4 Day Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure. Do not use in temperatures below 41° F\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation \u0026amp; Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surface:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIn poor condition remove all previous coatings and prime the substrate, referring to the primer\/undercoat technical datasheet for further preparation instructions.\u003c\/li\u003e\n\u003cli\u003eIn good condition wash down with a suitable detergent, rinse with fresh water and allow to dry\u003c\/li\u003e\n\u003cli\u003eAbrade with 280 - 320 grit paper and remove sanding residue\u003c\/li\u003e\n\u003cli\u003eWipe with Brushing LIquid 333 and allow to dry completely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eAll Substrates:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrime with a suitable primer or primer\/undercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand the undercoat smooth with 120 - 400 grit wet or dry paper\u003c\/li\u003e\n\u003cli\u003eRemove dust with a dust wipe\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of Toplac Plus with 8-16 hours depending on ambient temperature (refer to the table above)\u003c\/li\u003e\n\u003cli\u003eAmbient temperatures should be between 41° F and 95° F\u003c\/li\u003e\n\u003cli\u003eDo not exceed 10% thinner by volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Interlux_Toplac_Plus_Application_Information.pdf\"\u003e\u003cimg height=\"60\" width=\"60\" alt=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" title=\"pdficon.png\" class=\"__mce_add_custom__\"\u003eClick here for Interlux Toplac Plus Topside Boat Paint Application Information\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg class=\"warningImg\" alt=\"warning sign\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"productWarning\" href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Atlantic Gray \/ Qt","offer_id":43098113015942,"sku":"ILX-YLK684\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Bondi Blue \/ Qt","offer_id":43098113048710,"sku":"ILX-YLK898\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Bounty \/ Qt","offer_id":43098113081478,"sku":"ILX-YLK292\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Cream \/ Qt","offer_id":43098113114246,"sku":"ILX-YLK027\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Donegal Green \/ Qt","offer_id":43098113147014,"sku":"ILX-YLK541\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Flag Blue \/ Qt","offer_id":43098113179782,"sku":"ILX-YLK990\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Ivory \/ Qt","offer_id":43098113212550,"sku":"ILX-YLK187\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Jet Black \/ Qt","offer_id":43098113245318,"sku":"ILX-YLK999\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Lauderdale Blue \/ Qt","offer_id":43098113278086,"sku":"ILX-YLK936\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Matterhorn White \/ Qt","offer_id":43098113310854,"sku":"ILX-YLK198\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Mediterranean White \/ Gal","offer_id":43098113343622,"sku":"ILX-YLK184\/1GLUS","price":172.5,"currency_code":"USD","in_stock":true},{"title":"Mediterranean White \/ Qt","offer_id":43098113376390,"sku":"ILX-YLK184\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Off White \/ Qt","offer_id":43098113409158,"sku":"ILX-YLK192\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Oxford Blue \/ Qt","offer_id":43098113441926,"sku":"ILX-YLK993\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Oyster White \/ Qt","offer_id":43098113474694,"sku":"ILX-YLK194\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Platinum \/ Qt","offer_id":43098113507462,"sku":"ILX-YLK151\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Rochelle Red \/ Qt","offer_id":43098113540230,"sku":"ILX-YLK299\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Sapphire Blue \/ Qt","offer_id":43098113572998,"sku":"ILX-YLK830\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Snow White \/ Gal","offer_id":43098113605766,"sku":"ILX-YLK000\/1GLUS","price":172.5,"currency_code":"USD","in_stock":true},{"title":"Snow White \/ Qt","offer_id":43098113638534,"sku":"ILX-YLK000\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Qt","offer_id":43098113671302,"sku":"ILX-YLK101\/1QTUS","price":60.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Toplac_Plus__82381.jpg?v=1770148030"},{"product_id":"trilux-33","title":"Interlux Trilux 33 Antifouling Boat Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Trilux 33 Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFor reliable antifouling on aluminum and fiberglass boats, Trilux 33\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e delivers outstanding multi-season protection\u003c\/strong\u003e.\u003c\/span\u003e\u003cspan\u003e This advanced \u003c\/span\u003e\u003cspan\u003eTrilux 33\u003c\/span\u003e\u003cspan\u003e antifouling paint features a slow-polishing formula that minimizes buildup while keeping hulls smooth and fuel-efficient. Ideal for outboards, sterndrives, and aluminum hulls, its copper-free formula prevents galvanic corrosion, making it a top choice for metal surfaces. It provides long-lasting defense against marine growth in both saltwater and freshwater environments. Easy to apply and highly effective, \u003c\/span\u003e\u003cspan\u003eTrilux 33\u003c\/span\u003e\u003cspan\u003e ensures your boat stays cleaner, longer. \u003c\/span\u003e\u003cspan\u003eAvailable in blue, green, red, or gray.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsidered the safest, most effective antifouling paint for use on aluminum boats, outdrives, and outboards.\u003c\/li\u003e\n\u003cli\u003eFor use on fiberglass, wood, and all underwater metal surfaces.\u003c\/li\u003e\n\u003cli\u003eExclusive Biolux Technology blocks slime.\u003c\/li\u003e\n\u003cli\u003eSlow polishing formula to avoid seasonal paint build-up\u003c\/li\u003e\n\u003cli\u003eAvailable in a range of bright colors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLow sheen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage (Approx):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush\/roller - 399 ft²\/gal   |     Spray - 266 ft²\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e390 g\/lt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors\u003c\/strong\u003e: YBA060 Blue, YBA063 Black, YBA068 White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 US Quart, 1 US Gallon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterlux Special Thinner\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThinning and cleaning on bare wood\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterlux InterProtect\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEpoxy barrier for blister protection and priming\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterlux Fiberglass Solvent Wash\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo clean bare fiberglass prior to application\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003eApply the product to clean, dry, and properly prepared surfaces only. Prime metal surfaces with InterProtect or Primocon. Trilux bottom paint should NOT be applied to tin-based paint such as Micron 33. Use at least two coats of Trilux 33 for optimal results.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Brush, roller, airless or conventional spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 mils (3.6 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e443.7 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e41° F. Min. \/ 95°F. Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSpecial Thinner 216\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Touch\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003ctd\u003eTo Launch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e5 HR\u003c\/td\u003e\n\u003ctd\u003e10 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e20 HR\u003c\/td\u003e\n\u003ctd\u003e30 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Aluminum\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with medium grit emery cloth to a bright metal finish. Wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply one very thin coat of Vinyl-Lux Primewash 353-354.\u003c\/li\u003e\n\u003cli\u003ePrime with InterProtect 2000E\/2001E.\u003c\/li\u003e\n\u003cli\u003eNote: on sandblasted aluminum, the Viny-Lux Primewash can be omitted if priming with InterProtect the same day as blasting.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Interlux Trilux 33 Antifouling Bottom Paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFactory Finished Aluminum\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrime with Primocon\u003c\/li\u003e\n\u003cli\u003eApply two coats of Interlux Trilux 33\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eScrub well using soap and water and a stiff brush. Rinse with fresh water.\u003c\/li\u003e\n\u003cli\u003eWipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cli\u003eWhile the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned.\u003c\/li\u003e\n\u003cli\u003eNo-Sand System:\u003c\/li\u003e\n\u003cli\u003eApply one thin, continuous coat of Interlux Fiberglass No-Sand Primer.\u003c\/li\u003e\n\u003cli\u003eSanding System:\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper. Remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eWipe with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grade paper.\u003c\/li\u003e\n\u003cli\u003eClean with 216 Thinner.\u003c\/li\u003e\n\u003cli\u003eApply the first coat reduced by 10% with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Seam Compound Brown 30.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eEpoxy Coated Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eSand with 120 to 180 grade paper.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue.\u003c\/li\u003e\n\u003cli\u003eWipe with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cli\u003ePrime with Interprotect 2000E\/2001E.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWith Interlux Trilux 33 Bottom Paint:\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper.\u003c\/li\u003e\n\u003cli\u003eOther antifoulings:\u003c\/li\u003e\n\u003cli\u003eSand surface and wipe clean.\u003c\/li\u003e\n\u003cli\u003ePrime with Primocon.\u003c\/li\u003e\n\u003cli\u003eRemove antifouling paint in poor condition with Interstrip Semi-Paste 299E.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirless spray pressure should be 170-204 bar\/2500-3000 psi. Use tip size 0.53 mm\/21 thousand.\u003c\/li\u003e\n\u003cli\u003eFor conventional spray, pressure pot pressure should be 3.44-4.47 bar\/50-65 psi (gun pressure); 10-15 psi (pot pressure).\u003c\/li\u003e\n\u003cli\u003eConventional spray tip size should be 1.8-2.2mm\/70-85 thou.\u003c\/li\u003e\n\u003cli\u003eBare wood applications should get 3 coats of Interlux Trilux 33.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Trilux_33.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Trilux_33.pdf\"\u003eClick to Download Interlux Trilux 33 Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Qt","offer_id":43098114130054,"sku":"ILX-YBA063Q","price":109.63,"currency_code":"USD","in_stock":true},{"title":"Black \/ Gal","offer_id":43098114162822,"sku":"ILX-YBA063G","price":372.79,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098114195590,"sku":"ILX-YBA060Q","price":109.43,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098114228358,"sku":"ILX-YBA060G","price":372.79,"currency_code":"USD","in_stock":true},{"title":"White \/ Qt","offer_id":43098114261126,"sku":"ILX-YBA068Q","price":109.63,"currency_code":"USD","in_stock":true},{"title":"White \/ Gal","offer_id":43098114293894,"sku":"ILX-YBA068G","price":372.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Trilux33_1GLUS__08369.jpg?v=1770147893"},{"product_id":"trinidad-75","title":"Pettit Trinidad 75 Hard Antifouling Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Trinidad 75 Hard Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit Trinidad 75 Bottom Paint is an extremely effective hard antifouling paint for professional applicators. Trinidad 75 utilizes an extremely high load of cuprous oxide to combat even the most extreme fouling conditions. Its durable, hard modified epoxy finish has excellent adhesion and is highly abrasion resistant. Trinidad 75 utilizes fast dry technology so you can paint and launch in the same day. When left in the water, Trinidad 75 will provide years of dependable service.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pettt-hull-defense.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettt-hull-defense.jpg\" alt=\"pettt-hull-defense.jpg\" width=\"116\" height=\"130\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e Pettit Trinidad 75 provides excellent antifouling protection and is backed by the industry's strongest limited warranty. Pettit's Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Trinidad 75 offers the most dependable and trusted antifouling protection in the industry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProven track record of unparalleled performance\u003c\/li\u003e\n\u003cli\u003eDesigned for extreme fouling conditions with a high copper load\u003c\/li\u003e\n\u003cli\u003eLeft In the water, Trinidad 75 provides classic, year-round service\u003c\/li\u003e\n\u003cli\u003eFast dry technology = paint and launch same day\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: 1 US Gallon\u003c\/li\u003e\n\u003cli\u003eFinish: Flat\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: 1074FD Blue, 1079FD Special Black\u003c\/li\u003e\n\u003cli\u003eNumber of Coats Recommended: 2 minimum per season\u003c\/li\u003e\n\u003cli\u003eCoverage: 4450 ft2\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 329 grams\/liter\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 60.9%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\" target=\"_blank\"\u003ePettit Protect Epoxy Primer\u003c\/a\u003e - Primer for bare fiberglass applications\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-bio-blue-marine-hull-surface-prep-79179.html\" target=\"_blank\"\u003ePettit 92 Bio-Blue Hull Surface Prep\u003c\/a\u003e - For bare fiberglass applications\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Trinidad 75 Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Trinidad 75 paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Trinidad 75 Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Trinidad 75 Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Trinidad 75 provides. (450 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Trinidad 75 has a coverage of 450 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Trinidad 75 Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit Trinidad 75 Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap (maximum 3\/8\" nap) roller cover. Over-application will virtually assure inadequate coating performance. Mix paint thoroughly to ensure ingredients are evenly dispersed throughout the can. Follow all surface preparation instructions to ensure proper coating performance. Trinidad 75 should not be applied to aluminum hulls or outdrives.\u003c\/p\u003e\n\u003cp\u003eTrinidad 75 is heavily loaded with cuprous oxide; as a result, settling can occur. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Trinidad 75 Application\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/trinidad-75-application.jpg\" alt=\"Pettit Trinidad 75 Application\" width=\"600\" height=\"338\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e Brush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2 minimum per season\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 mils (3.6 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 450 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e 40°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003e120 Brushing Thinner (Max 10%)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"2\" cellpadding=\"2\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  2 HR\u003c\/td\u003e\n\u003ctd\u003e  8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  4 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003ctd\u003e 24 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTrinidad 75 can be applied over most aged hard antifouling coatings.\u003c\/li\u003e\n\u003cli\u003eIf previous paint is in good condition, sand painted surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eSolvent clean with 120 Brushing Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Trinidad 75.\u003c\/li\u003e\n\u003cli\u003eIf previous coating is soft or in poor condition, remove to the bare surface by sanding or using paint remover.\u003c\/li\u003e\n\u003cli\u003eProceed with appropriate bare system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or dewaxed several times with D-95 Dewaxer. Then proceed with one of the systems below:\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand hull thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cem\u003eNon-Sanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, dewax surface with 92 Bio-Blue Surface Prep using a course nylon scuff pad.\u003c\/li\u003e\n\u003cli\u003eRinse all residue from surface and let dry.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Pettit Protect Epoxy Primer 4700\/4701 following primer label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two or three coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarrier Coat\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrepare the fiberglass surface as mentioned above (sanding method).\u003c\/li\u003e\n\u003cli\u003eApply two to three coats of Pettit Protect Epoxy Primer per label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two or three coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply a coat of Trinidad 75 thinned 25% with Pettit 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eAllow an overnight dry then lightly sand and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt.\u003c\/li\u003e\n\u003cli\u003eRemove loose rust and scale from the metal surface by scraping or sandblasting.\u003c\/li\u003e\n\u003cli\u003eBlow off residue then apply one or two coats of Pettit 6980 Rustlok Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with two coats of Pettit 4700\/4701 Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eApply two or three finish coats of Trinidad 75.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not use Pettit Trinidad 75 on aluminum hulls and outdrives.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/PPettit-Trinidad-75-Application-Instruction.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"64\" height=\"62\"\u003e\u003cstrong\u003eClick to Download Pettit Trinidad 75 Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Blue \/ Gal","offer_id":43098114687110,"sku":"PET-1074FDG","price":382.39,"currency_code":"USD","in_stock":true},{"title":"Special \/ Gal","offer_id":43098114719878,"sku":"PET-1079FDG","price":382.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Trinidad-75__33338.jpg?v=1770147805"},{"product_id":"ultrakote","title":"Interlux Ultra-Kote Hard Antifouling Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Ultra-Kote Hard Antifouling High Copper Bottom Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-cf52994d-7fff-fcaf-246a-e3ed482928aa\"\u003e\u003cstrong\u003eFor tough, long-lasting protection, Interlux Ultra Kote delivers a durable, hard finish that resists fouling in high-growth waters.\u003c\/strong\u003e\u003cspan\u003e This high-performance Interlux Ultra bottom paint is made to withstand heavy use, making it ideal for powerboats and racing vessels that demand a smooth, efficient hull. Its advanced formula provides excellent adhesion and wear resistance, ensuring season-long antifouling protection. Ultra Kote offers reliable defense against barnacles and algae while maintaining a sleek, fuel-efficient surface. \u003c\/span\u003e\u003cspan\u003eAvailable in blue, black, green or red.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eProtect your vessel with Interlux Ultra-Kote Bottom Paint, formulated to keep your hull free from fouling and optimized for performance. This hard, durable coating provides excellent protection against all types of marine growth, ensuring your boat maintains its speed and efficiency. Ideal for boats in high-fouling areas, Ultra-Kote offers a strong defense, keeping your underwater surfaces clean and smooth season after season.\u003c\/p\u003e\n\u003cp\u003eThe Interlux Ultra-Kote is a high performance antifouling paint that is perfect for areas that experience moderate to severe fouling. Designed to provide maximum performance, the high copper hard coating provides excellent long term protection from shell fouling, such as barnacles. Thanks to the fast drying formula Ultra-Koat allows you to paint and launch in the same day. Can be used on Fiberglass, wood, or properly primed still with the addition of color stability for a uniform look. Able to be used in fresh water, salt water, \u0026amp; brackish water.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003eNote\u003c\/em\u003e:\u003c\/strong\u003e Green Ultra-Kote (Part Number Y3559U1) is not available to ship to California\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks on Fiberglass, wood, and steel boats\u003c\/li\u003e\n\u003cli\u003eFor use in Fresh water, Salt water, \u0026amp; Brackish water\u003c\/li\u003e\n\u003cli\u003eFast dry formula\u003c\/li\u003e\n\u003cli\u003eHigh Copper\u003c\/li\u003e\n\u003cli\u003eLong term protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: US Gallon\u003c\/li\u003e\n\u003cli\u003eFinish: Matte\u003c\/li\u003e\n\u003cli\u003eRecommended usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: Red (Y3449U), Green (Y3559U), Blue (Y3669U), Black Y3779U\u003c\/li\u003e\n\u003cli\u003eDrying time: Touch dry 1hrs; To launch 8hrs. @73° F\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: 2 coats, 3 on bare wood (first coat thinned)\u003c\/li\u003e\n\u003cli\u003eCoverage: 506 ft²\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 327 g\/lt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Interlux Ultra-Kote Hard Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMixing: Stir or shake contents thoroughly before use\u003c\/li\u003e\n\u003cli\u003eThinner:\u003cspan\u003e \u003c\/span\u003eSpecial Thinner 216\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eBrush Ease 433\u003c\/li\u003e\n\u003cli\u003eThinning: Thin only if necessary. Thin no more than 10% (except conventional spray). Use\u003cspan\u003e \u003c\/span\u003eBrush Ease 433\u003cspan\u003e \u003c\/span\u003eif roller or brush drags during application\u003c\/li\u003e\n\u003cli\u003eCleaner:\u003cspan\u003e \u003c\/span\u003eSpecial Thinner 216\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eBrush Ease 433\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAirless Sprayer\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePressure: 170-204 bar\/2500-3000 psi\u003c\/li\u003e\n\u003cli\u003eTip Size: .53mm \/21 thou.\u003c\/li\u003e\n\u003cli\u003eMust be thinned 5-10% bu volume with\u003cspan\u003e \u003c\/span\u003eSpecial Thinner 216\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eConventional Spray\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePressure Pot: Pressure : 3.44-4.47 bar\/50-65 psi (gun pressure); 10-15 psi (pot pressure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTip Size: 1.83-2.2 mm\/70-85 thou.\u003c\/li\u003e\n\u003cli\u003eThin 10-15\" with\u003cspan\u003e \u003c\/span\u003eSpecial Thinner 216\u003cspan\u003e \u003c\/span\u003efor application by Pressure Pot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eRoller\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eUse a 3\/8\" nap solvent resistant roller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eGood Condition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove all traces of loose paint \u0026amp; contamination by sanding\u003c\/li\u003e\n\u003cli\u003eSand using an 80 grit wet-dry sandpaper\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePoor Condition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely remove all old antifouling paint\u003c\/li\u003e\n\u003cli\u003eFor Fiberglass \u0026amp; wood use\u003cspan\u003e \u003c\/span\u003eInterstrip 299E\u003c\/li\u003e\n\u003cli\u003eFor Steel sandblast to a near white metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass Preparation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eFiberglass must be properly prepared to prevent delamination\u003c\/li\u003e\n\u003cli\u003eRemove mold release wax using\u003cspan\u003e \u003c\/span\u003eFiberglass Surface Prep YMA601V\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eFiberglass Solvent Wash 202\u003c\/li\u003e\n\u003cli\u003eFill any surface imperfections with\u003cspan\u003e \u003c\/span\u003eInterlux Watertite\u003c\/li\u003e\n\u003cli\u003eOnce surface is properly prepared follow the application system below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - No Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean following the above preparation procedure\u003c\/li\u003e\n\u003cli\u003eApply one coat of Interprotect 2000E or Fiberglass No-Sand Primer\u003c\/li\u003e\n\u003cli\u003eFollowing overcoating guidelines for the primer, apply 2 coats of Ultra-Kote allowing appropriate drying times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean following the above preparation procedure\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade (grit) paper\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003cli\u003eApply at least 2 coats of Ultra-Kote allowing for appropriate dry times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Blister Prevention System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean following the above preparation procedure\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade (grit) paper\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003cli\u003eApply Interprotect 2000E to a thickness of 10 mils\u003c\/li\u003e\n\u003cli\u003eApply at least two coats of Ultra-Kote unthinned, allowing for the appropriate dry times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarewood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grade (grit) paper\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003cli\u003eApply the first coat of Ultra-Kote thinned 10% with\u003cspan\u003e \u003c\/span\u003eSpecial Thinner 216\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eBrush-Ease 433\u003c\/li\u003e\n\u003cli\u003eIf necessary, fill seams with Seam Compound Brown 30\u003c\/li\u003e\n\u003cli\u003eApply 2 or more coats of Ultra-Kote unthinned, allowing for appropriate dry times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eUnderwater Metals\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDo\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euse on aluminum\u003c\/li\u003e\n\u003cli\u003eContact Interlux Technical Service Dept. 1-800-468-7589 for full information\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Interlux_Ultra_Kote_Application.pdf?v=1771443042\" target=\"_blank\"\u003e\u003cspan\u003e\u003cimg height=\"60\" width=\"60\" alt=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" title=\"pdficon.png\" class=\"__mce_add_custom__\"\u003eClick here to download Interlux Ultra-Kote Application Guide\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg class=\"warningImg\" alt=\"warning sign\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"productWarning\" href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"BLACK \/ Gal.","offer_id":43098115047558,"sku":"ILX-Y3779U1","price":204.81,"currency_code":"USD","in_stock":true},{"title":"BLUE \/ Gal.","offer_id":43098115080326,"sku":"ILX-Y3669U1","price":204.81,"currency_code":"USD","in_stock":true},{"title":"GREEN \/ Gal.","offer_id":43098115113094,"sku":"ILX-Y3559U1","price":204.81,"currency_code":"USD","in_stock":true},{"title":"RED \/ Gal.","offer_id":43098115145862,"sku":"ILX-Y3449U1","price":204.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/UltraKote.jpg?v=1770147725"},{"product_id":"unepoxy-hrt","title":"Pettit Unepoxy HRT Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePettit Unepoxy HRT Bottom Paint\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePettit Unepoxy HRT is formulated to provide outstanding protection at a very affordable price. Unepoxy HRT has a smooth durable finish that is able to withstand beaching, trailering, and season long abuse. This antifouling paint uses the latest technology available to create a hybrid paint film that's strong enough to handle the tough marine environment without building up over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHRT: Hybrid Reactive Technology\u003c\/strong\u003e features high density biocide utilization to maximize effectiveness, along with film modifiers to reduce yearly build-up, maintain color consistency, and lower weight.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeasonal antifouling\u003c\/li\u003e\n\u003cli\u003eEconomical hybrid protection\u003c\/li\u003e\n\u003cli\u003eSmooth durable polishing finish\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eDurable finish withstands beaching, trailering, and season long abuse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1211 Blue, 1311 Green, 1611 Red, 1811 Black\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Unepoxy HRT Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Unepoxy HRT paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Unepoxy HRT Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Unepoxy HRT Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Unepoxy HRT provides. (500 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Unepoxy HRT has a coverage of 500 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Unepoxy HRT\u003c\/h2\u003e\n\u003cp\u003eUnepoxy HRT is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 5-10% using \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003e120 Brushing Thinner\u003c\/a\u003e\u003c\/span\u003e. Unepoxy HRT has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 500 ft2\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e 3\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e 1 minimum per season with additional coat at waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e 3.75 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e 1.5 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e 50°F Min. \/ 90°F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e \u003cspan\u003e\u003ca title=\"Pettit 120 Brushing Thinner\" href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003e120 Brushing Thinner\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Do not apply Unepoxy HRT on aluminum hulls or outdrives**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor old hard and ablative bottom paints, begin by thoroughly wiping down the surface with 120 Brushing Thinner. Pay extra attention to waterline areas. Then sand the painted surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eOld tin or copper copolymers, or Teflon-based antifouling paints should be sanded thoroughly with 80 grit sandpaper to remove the chalky outer surface. Wipe clean ten apply one coat of Unepoxy HRT.\u003c\/li\u003e\n\u003cli\u003eSoft, sloughing antifouling paints should be removed before applying Unepoxy HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-bio-blue-marine-hull-surface-prep-79179.html\" target=\"_blank\"\u003e92 Bio-Blue Hull Surface Prep\u003c\/a\u003e\u003c\/span\u003e or de-waxed several times with \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-eco-hrt-copper-free-bottom-paint\/\" target=\"_blank\"\u003ePettit D-95 Dewaxer\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Sanding Method (1): \u003c\/strong\u003ePrep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit D95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip- Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three thin coats of Unepoxy HRT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Sanding Method (2): \u003c\/strong\u003eThoroughly clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a course Scotch-Brite pad in a swirling motion. Thoroughly rinse all residue from surface and let dry. Then apply one coat of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-gray-high-build-epoxy-barrier-primer-coat\/\" target=\"_blank\"\u003ePettit-Protect High Build Epoxy Primer\u003c\/a\u003e\u003c\/span\u003e. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of Unepoxy HRT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBare wooden hulls should be sanded thoroughly with 80 grit sandpaper and wiped clean of sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-eco-hrt-copper-free-bottom-paint\/\" target=\"_blank\"\u003e6627 Tie-Coat Primer\u003c\/a\u003e\u003c\/span\u003e thinned 25% with \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-epoxy-marine-thinner.html\" target=\"_blank\"\u003e97 Epoxy Thinner\u003c\/a\u003e\u003c\/span\u003e directly to the bare wood. Allow 4 hours to dry.\u003c\/li\u003e\n\u003cli\u003eApply two un-thinned coats of Unepoxy HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease a dirt; remove loose rust and scale from the metal surface.\u003c\/li\u003e\n\u003cli\u003eScrape, sandblast or wire brush to 2-3 mil profile. Blow off residue.\u003c\/li\u003e\n\u003cli\u003eApply one or two coats of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-rustlok-steel-anti-corrosive-marine-primer\/\" target=\"_blank\"\u003ePettit 6980 Rustlok Primer\u003c\/a\u003e\u003c\/span\u003e followed by two coats of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\" target=\"_blank\"\u003ePettit 4700\/4701 High Build Epoxy Primer.\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFollow with Unepoxy HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUnderwater Metal Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent clean then abrade to clean bright metal by sanding with 60-80 grit sandpaper, sandblasting or wire brushing.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-prop-coat-barnacle-barrier-aerosol\/\" target=\"_blank\"\u003eProp Coat Barnacle Barrier 1792\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin coats of Unepoxy HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Pettit's Unepoxy HRT Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-Unepoxy-HRT-Antifouling-Paint-Application-Instructions.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"80\" height=\"77\"\u003e\u003cspan\u003e\u003cstrong\u003eClick to Download Pettit Unepoxy HRT Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098115440774,"sku":"PET-1811G","price":143.36,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098115473542,"sku":"PET-1211G","price":143.36,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098115506310,"sku":"PET-1311G","price":143.36,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098115539078,"sku":"PET-1611G","price":143.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Unepoxy_HRT_Bottom_Paint__53039.jpg?v=1770147622"},{"product_id":"vc-offshore-w-teflon","title":"Interlux VC Offshore Antifouling Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eInterlux VC Offshore Antifouling Boat Bottom Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFormulated for high-performance boats, Interlux VC Offshore Antifouling Bottom Paint delivers a smooth, ultra-durable finish that resists fouling while reducing drag.\u003c\/strong\u003e\u003cspan\u003e This hard, low-friction VC Offshore paint is ideal for racing and powerboats, providing superior protection in saltwater and freshwater environments. Its fast-drying, solvent-based formula allows for easy sanding and burnishing, ensuring maximum speed and efficiency on the water. With no paint buildup over time, it's the perfect choice for boaters who demand top-tier performance and long-lasting antifouling protection. \u003c\/span\u003e\u003cspan\u003eAvailable in blue, red, or black to complement your vessel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSold in Gallons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVC Offshore for racing, sailing and performance power boats is formulated with Fluoro microadditive for a hard, smooth low friction surface that can be burnished to a very low profile. When polished, VC Offshore yields a very hard finish for maximum durability and reduced friction for increased performance. VC Offshore is suitable for use in fresh and salt water.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor racing, sailing and power boats\u003c\/li\u003e\n\u003cli\u003eSuitable for fresh and salt water\u003c\/li\u003e\n\u003cli\u003eHard, Smooth finsh\u003c\/li\u003e\n\u003cli\u003eLow friction finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 3 colors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack (ILX-V118)\u003c\/li\u003e\n\u003cli\u003eBlue (ILX-V116)\u003c\/li\u003e\n\u003cli\u003eRed (ILX-V117)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003e\u003cstrong\u003eInterlux Special Thinner\u003c\/strong\u003e\u003c\/a\u003e: For thinning and clean-up\u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003ch2 class=\"tab_label classyunicodedone\"\u003eHow to Apply\u003c\/h2\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION DATA METHOD\u003c\/strong\u003e: Brush, Conventional Spray, Roller(Pressure Pot)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDRY FILM THICKNESS PER COAT: \u003c\/strong\u003e2 mils (5.1 wet mils)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e 300 sq. ft\/gal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION TEMP:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50° F. Min. \/ 95°F. Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHINNER:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eViny-Lux® Solvent 355 or Special Thinner 216\u003c\/p\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Touch\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003ctd\u003eTo Launch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003ctd\u003e8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e12 HR\u003c\/td\u003e\n\u003ctd\u003e16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePREVIOUSLY PAINTED SURFACES:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRemove, unless it is vinyl based. Scrape and sand old vinyl coatings which are not adhering, clean and dry surface. Remove antifouling paint in poor condition with Interstrip Semi-Paste 299E.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBegin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Sand with 80 grade (grit) paper. Remove sanding residue. Wipe with Fiberglass Solvent Wash 202.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE WOOD:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSand with 80 grade (grit) paper. Clean with Special Thinner 216. Apply 1st coat thinned 10% with VinyLux® Solvent 355.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE METAL:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSandblast and apply 4-5 coats of Interprotect® 2000E\/2001E. If blasting is not possible (or if more than 2 hours has passed since blasting) sand or grind with coarse emery cloth and apply a self-etching primer prior to Interprotect 2000E\/2001E or Interprotect 3000\/3001.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eApply 3 coats of VC Offshore*. BURNISHING: After the final coat of VC Offshore* has cured, wet sand with 400 grade (grit) paper, removing any imperfections in the coat. Burnish with fine bronze wool until a shiny, super smooth finish is obtained. Apply an extra coat if wet sanding or burnishing. Conventional Spray Pressure Pot: Pressure: 3.44-4.08 bar\/50-60 psi (gun pressure), pot pressure 10-15 psi. Tip Size: 1.8-2.2 mm\/70-85 thou. Spraying of antifouling paints is prohibited in Canada. Other Do not apply thin coats. Do not apply VC Offshore* in thin coats as this will lead to a rougher surface and additional sanding. It may also lead to premature fouling.\u003c\/p\u003e\n\u003cp\u003eProduct temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F.\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAmbient temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. \u003cbr\u003eSubstrate temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eApply to clean, dry, properly prepared surfaces only. Bare surfaces must be sanded. Do not apply VC Offshore* over non-vinyl antifouling paints. Do not apply VC Offshore* over aluminum. Do not use on aluminum boats, outdrives or outboards without proper barrier coats.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Gal.","offer_id":43098116587654,"sku":"ILX-V118G","price":466.63,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal.","offer_id":43098116620422,"sku":"ILX-V116G","price":466.63,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal.","offer_id":43098116653190,"sku":"ILX-V117G","price":466.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/InterluxVCOffshore_57723db1-fdd8-408f-8242-f157bfebf0d6.jpg?v=1770147341"},{"product_id":"vivid","title":"Pettit Vivid Hard SR Ablative Antifouling Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Vivid Ablative Antifouling Boat Paint\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWith bold color and powerful protection, Pettit bottom paint delivers a bright, smooth, hard finish with long-lasting antifouling performance.\u003c\/strong\u003e\u003cspan\u003e Multi-season Pettit Vivid bottom paint combines bright, eye-catching pigments with a durable, self-polishing formula that resists marine growth while maintaining fuel efficiency. Ideal for use on fiberglass, aluminum, and wooden hulls, it's perfect for boaters who want both aesthetics and reliability. Designed for both saltwater and freshwater, Vivid offers excellent adhesion and is available in vibrant blue, green, yellow, or red, as well as classic black or white. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA top marine paint brand,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/brands\/Pettit-Paint.html\"\u003ePettit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eis known for its innovative and high-quality bottom paints. They are committed to providing their customers with the latest in technology in bottom paints. Pettit Vivid brings\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit\/\"\u003ePettit bottom paints\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto a new level. Their paints are widely considered to be some of the best on the market.\u003c\/p\u003e\n\u003cp\u003ePettit Vivid bottom paint is formulated to have the brightest, most vibrant colors with several color choices as well. Responding to customer requests, Pettit now offers the whitest of white tints in Pettit bottom paints. Pettit Vivid bottom paint is formulated with a hybrid technology that incorporates both the benefits of ablative paints along with hard paints. Pettit Vivid bottom paint dries to a smooth finish and withstands day-to-day use and trailering. Pettit Vivid bottom paint is easy to apply, and Wholesale Marine’s pros recommend that surfaces are primed first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVivid's Hybrid technology offers all the advantages of ablative and hard paints\u003c\/li\u003e\n\u003cli\u003eClean, bright colors including true white and black\u003c\/li\u003e\n\u003cli\u003eDual-biocides provide excellent multi-season protection\u003c\/li\u003e\n\u003cli\u003eExcellent for Racing, Trailering, or Rack-Stored Boats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1261 Blue, 1861 Black, 1661 Red, 1361 Green, 1461 Yellow, 1161 White\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Vivid Color Swatches\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-vivid-color-swatches.jpg\" alt=\"Pettit Vivid Color Swatches\" width=\"438\" height=\"77\"\u003e\u003c\/p\u003e\n\u003cp\u003eColors can be mixed to achieve a broad spectrum of new bright bottom paint colors. Refer to the color chart for mixing information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish: Flat\u003c\/li\u003e\n\u003cli\u003eSolids by Weight: 83%\u003c\/li\u003e\n\u003cli\u003eCoverage: 440 ft2\/gal.\u003c\/li\u003e\n\u003cli\u003eVOC: 330 grams\/liter (max)\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Thiocyanate - 25.0% | Zinc Pyrithione - 2.80%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\"\u003ePettit 120 Brushing Thinner\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For thinning in brush and roller applications\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-121-paint-spraying-thinner-quart.html\"\u003ePettit 121 Spraying Thinner\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For thinning in spray applications\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\"\u003ePettit Protect Epoxy Barrier Coat Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Suggested primer - especially for white or light colored applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow Much Pettit Vivid Bottom Paint Do I Need for My Boat?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much vivid paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e \u003cimg class=\"__mce_add_custom__\" title=\"Pettit Vivid Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Vivid Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Vivid provides. (440 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Vivid has a coverage of 440 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow To Apply Pettit Vivid Bottom Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePettit Vivid bottom paint can be easily applied by brush, roller, or spray. Prior to application, mix paint thoroughly to ensure pigments are evenly dispersed throughout the can. All surfaces must be clean, dry, and properly prepared prior to painting. When rolling, use only a high-quality short nap (maximum 3\/16\" nap) roller cover. Apply using thin coats; over-application of this product will cause inadequate coating performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush, roller, airless or conventional spray. When applying by roller use a short nap (3\/16 inch maximum) roller cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1 minimum per season with additional coats for extended service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 mils (3.1 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e440 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e120 Brushing Thinner. 121 Spraying Thinner, or 120VOC Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e \u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90°F\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003ctd\u003e16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70°F\u003c\/td\u003e\n\u003ctd\u003e8 HR\u003c\/td\u003e\n\u003ctd\u003e24 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e16 HR\u003c\/td\u003e\n\u003ctd\u003e48 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*The above dry times are minimums. Vivid may be recoated after the minimum time shown. There is no maximum dry time before launching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation and Application Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePreviously Painted Surfaces\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the previous coating is in good condition:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly sand with 80-grit sandpaper. Solvent clean with Pettit 120 or 120VOC Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin coats of Vivid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIf the previous coating is soft or in poor condition:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove to the bare surface by sanding or using paint remover.\u003c\/li\u003e\n\u003cli\u003eProceed with appropriate bare system as described below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eBare Fiberglass\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer.\u003c\/li\u003e\n\u003cli\u003eProceed with either the Sanding Method or one of the Non-Sanding Methods below:\u003c\/li\u003e\n\u003cli\u003eSanding Method:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAfter dewaxing, sand thoroughly with 80-grit paper to a dull, frosty finish.\u003c\/li\u003e\n\u003cli\u003eRewash the surface with Pettit 120 or 120VOC Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin coats of Pettit Vivid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNon-Sanding Method #1\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, de-wax, and etch the surface with Pettit 92 Bio-Blue Hull Surface Prep using a medium Scotch-Brite pad in swirling motion; or wash the fiberglass at least three times using Pettit D95 Dewaxer.\u003c\/li\u003e\n\u003cli\u003eApply one thin coat of Pettit 6998 Skip-Sand Primer.\u003c\/li\u003e\n\u003cli\u003eApply two thin finish coats of Pettit Vivid bottom paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNon-Sanding Method #2\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, de-wax, and etch the surface with Pettit 92 Bio-Blue Hull Surface Prep using a medium Scotch-Brite pad in swirling motion.\u003c\/li\u003e\n\u003cli\u003eThoroughly rinse all residue from the surface and let dry.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Pettit 4740\/4741 H2-Prime Epoxy Primer or Pettit Protect High Build Primer.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Vivid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eBarrier Coat\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFiberglass bottoms potentially can form osmotic blisters within the gelcoat and into the laminate. To render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method).\u003c\/li\u003e\n\u003cli\u003eApply two or three coats of Pettit Protect 4700\/4701 Epoxy Primer or Vivid Epoxy Primer 4100\/4101.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Vivid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eBare Wood\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSand the entire surface with 80 grit paper and wash clean with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply a coat of Vivid thinned 25% with 120 Brushing Thinner\u003c\/li\u003e\n\u003cli\u003eAllow to dry overnight, lightly sand and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Pettit Vivid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eBare Aluminum\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor maximum corrosion resistance, sandblast to clean, bright metal.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue with clean, dry compressed air or a clean brush.\u003c\/li\u003e\n\u003cli\u003eImmediately apply 2 coats of Pettit 6627 Tie-Coat Primer.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin finish coats of Pettit Vivid Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirless sprayer\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eMust be at least 3\/4 horsepower\u003c\/li\u003e\n\u003cli\u003e Use a .017 to .019 spray tip\u003c\/li\u003e\n\u003cli\u003eThin Vivid 5% using Pettit 121 Spraying Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eConventional Air Gun\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eMust use a pressure pot with 15 to 20 psi on pot\u003c\/li\u003e\n\u003cli\u003eThin product 15% using Pettit 121 Spraying Thinner\u003c\/li\u003e\n\u003cli\u003eUse a .070 spray tip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRolling and Tipping\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThin Vivid 10% with Pettit 120 Brushing Thinner\u003c\/li\u003e\n\u003cli\u003eApply using thin coats using a 1\/8\" to 3\/16\" smooth nap roller\u003c\/li\u003e\n\u003cli\u003eCover only enough area that can be tipped before the paint film dries\u003c\/li\u003e\n\u003cli\u003eTip the surface using a quality natural bristle paint brush in a fore and aft direction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eBurnishing Vivid for a Smooth Racing Finish\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBurnishing can be achieved by using a buffer at 1750 rpms, a wool pad, and a Meguiar's Diamond Cut Compound (M85).\u003c\/li\u003e\n\u003cli\u003eThe low-dusting, low-splatter compound creates an effect similar to applying a finishing glaze.\u003c\/li\u003e\n\u003cli\u003eBurnishing Vivid with Meguiar's Diamond Cut will give you a porcelain-like racing finish without compromising antifouling performance.\u003c\/li\u003e\n\u003cli\u003eWhen burnishing, it is recommended to apply a third coat of Pettit Vivid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Qt","offer_id":43098116915334,"sku":"PET-1861Q","price":133.11,"currency_code":"USD","in_stock":false},{"title":"Black \/ Gal","offer_id":43098116948102,"sku":"PET-1861G","price":374.95,"currency_code":"USD","in_stock":false},{"title":"Blue \/ Qt","offer_id":43098116980870,"sku":"PET-1261Q","price":133.11,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098117013638,"sku":"PET-1261G","price":374.95,"currency_code":"USD","in_stock":false},{"title":"Green \/ Qt","offer_id":43098117046406,"sku":"PET-1361Q","price":139.94,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098117079174,"sku":"PET-1361G","price":374.95,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098117111942,"sku":"PET-1661G","price":374.95,"currency_code":"USD","in_stock":true},{"title":"Red \/ Qt","offer_id":43098117144710,"sku":"PET-1661Q","price":134.47,"currency_code":"USD","in_stock":true},{"title":"White \/ Qt","offer_id":43098117177478,"sku":"PET-1161Q","price":133.11,"currency_code":"USD","in_stock":true},{"title":"White \/ Gal","offer_id":43098117210246,"sku":"PET-1161G","price":374.95,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Qt","offer_id":43098117243014,"sku":"PET-1461Q","price":139.94,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Gal","offer_id":43098117275782,"sku":"PET-1461G","price":374.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/pettit_vivid_hard_SR_photo__33382.jpg?v=1770146696"},{"product_id":"brush-ease","title":"Interlux Brush Ease 433 Marine Paint Thinner","description":"\u003cdiv class=\"productView-description\" id=\"description-tab\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eInterlux Brush Ease 433 Marine Paint Thinner\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInterlux Brush-Ease 433 is a slow drying solvent to ease brushing and rolling and to improve flow. Interlux Brush-Ease 433 should only be used in products where it is specified in the directions, mostly antifouling paints, it is not an all purpose solvent.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in quarts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with specified antifouling paints including Micron CSC, Micron Extra and Trilux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Apply:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd small increments, in accordance with individual product directions.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Brush-Ease_433.pdf\" title=\"How to Apply PDF\" target=\"_parent\"\u003e\u003cimg height=\"39\" width=\"40\" alt=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" title=\"pdficon.png\" class=\"__mce_add_custom__\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/How_to_Apply_Brush-Ease_433.pdf?v=1770692544\"\u003e\u003cstrong\u003eHow to Apply\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Y433_Brush_Ease_MSDS.pdf\"\u003e\u003cimg height=\"41\" width=\"43\" alt=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" title=\"pdficon.png\" class=\"__mce_add_custom__\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Y433_Brush_Ease_MSDS.pdf?v=1770692544\"\u003eMSDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg class=\"warningImg\" alt=\"warning sign\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"productWarning\" href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Interlux Paint","offers":[{"title":"Qt","offer_id":43107124150406,"sku":"ILX-433Q","price":21.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/BrushEase433_1Q__85169.jpg?v=1770692398"},{"product_id":"brushing-liquid","title":"Interlux 333Q Marine Brushing Thinner","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eInterlux 333Q Marine Brushing Thinner\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInterlux Brushing Thinner is a slow drying solvent to ease brushing and facilitate the flow of specified paint coatings. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlow Drying Solvent\u003c\/li\u003e\n\u003cli\u003eUsed to Ease Brushing and Facilitate the flow of Coatings\u003c\/li\u003e\n\u003cli\u003eExtends Paint Drying Time in Hot Weather\u003c\/li\u003e\n\u003cli\u003eRecommended In Various Topside Systems for Removing Sanding Residue from Fiberglass and Wood Surfaces\u003c\/li\u003e\n\u003cli\u003eSold in Quarts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication and Use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd small increments, in accordance with individual product directions. \u003c\/p\u003e\n\u003cp\u003eCompatible with specified topside paints including Brightside and Toplac.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Y333_Brushing_Thinner_MSDS.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"48\" height=\"46\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Y333_Brushing_Thinner_MSDS.pdf?v=1770917172\" target=\"_blank\" title=\"Brushing Thinner MSDS\" rel=\"noopener\"\u003e\u003cspan\u003eMSDS\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Interlux Paint","offers":[{"title":"Qt","offer_id":43107124347014,"sku":"ILX-333Q","price":24.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/BrushingLiq333__07899.jpg?v=1770917246"},{"product_id":"brushing-thinner-120","title":"Pettit 120 Brushing Thinner","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit 120 Brushing Thinner\u003c\/h2\u003e\n\u003cp\u003ePettit 120 Brushing Thinner is a general purpose thinner for thinning brushing enamels for easier application. Many paints when stored for some time before use will increase in viscosity and should be thinned with a good thinner for normal brush application. 120 Brushing Thinner evaporates at a moderate rate and is completely out of the paint film in several hours. Surfaces can also be washed with this thinner prior to preparation or painting to remove any contamination or sanding residue.\u003c\/p\u003e\n\u003cp\u003eUp to 10% is the normal recommended usage, some very hot and windy days may require more thinner. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize - Quart. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse: \u003c\/strong\u003eAdd up to 10% of the thinner to any of Pettit enamel, primer and varnishes. Mix in thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Can Be Shipped Ground Only in the 48 Contiguous States**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Qt","offer_id":43107124543622,"sku":"PET-120Q","price":28.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/brushing-thinner-120__83124.jpg?v=1770682005"},{"product_id":"captains-varnish","title":"Pettit Captain's Varnish Traditional Marine Varnish","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit Captain's Varnish Aerosol Spray\u003c\/h2\u003e\n\u003cp\u003ePettit's Captain Varnish is a favorite among traditional marine industry professionals. Captain's Varnish 1015 is highly regarded for its ease of application, outstanding gloss retention and tough yet flexible durability. A combination of phenolic and alkyd resins blended with tung and linseed oils provide excellent performance. It's warm, light amber hue will enhance the rich, classic bright work appearance. Contains ultraviolet absorbers and filters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTraditional warm, amber color\u003c\/li\u003e\n\u003cli\u003eProvides outstanding gloss retention\u003c\/li\u003e\n\u003cli\u003eExtra U.V. protection\u003c\/li\u003e\n\u003cli\u003eExtremely durable finish\u003c\/li\u003e\n\u003cli\u003eEasy to apply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePettit\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-ez-wood-sealer\/\"\u003e\u003cspan\u003e \u003c\/span\u003e2018 EZ-Wood Sealer\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage: 30 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: Bare Wood: 4 minimum  |  Existing Varnish: 2 minimum\u003c\/li\u003e\n\u003cli\u003eApplication Temp: 40°F Min \/ 90°F Max \u003c\/li\u003e\n\u003cli\u003eDrying @ 70°: 2 Hours to touch and 12 hours for recoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Captain's Varnish\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface completely smooth with 180-320 grit production paper. Wipe surface to remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eFor the first coat use Pettit EZ Wood Sealer followed by at least 4 coats of Captain's Varnish\u003c\/li\u003e\n\u003cli\u003eApply a generous covering coat of Pettit Clear Sealer. Let it dry overnight and thoroughly sand with 220 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eLet each coat dry overnight, sand with 220 grit sandpaper and clean off residue before applying the next coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eVarnished Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove all the old varnish with a paint and varnish remover or by sanding.\u003c\/li\u003e\n\u003cli\u003eBleach the wood if necessary to remove water stains.\u003c\/li\u003e\n\u003cli\u003eProceed with the system for bare wood above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Captains_Varnish.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Captains_Varnish.pdf\"\u003eClick to Download Pettit Captain's Varnish Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Aerosol","offer_id":43107124740230,"sku":"PET-1015A","price":23.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit-Captains-Varnish-Aerosol-Spray__15501.jpg?v=1770917738"}],"url":"https:\/\/truewindmarine.com\/collections\/boat-bottom-paint.oembed","provider":"True Wind Marine","version":"1.0","type":"link"}