{"title":"Ablative Bottom Paints","description":"","products":[{"product_id":"act","title":"Interlux ACT Ablative Antifouling Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux ACT Ablative Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux ACT is a trusted single-season ablative bottom paint that delivers excellent season-to-season protection in moderate to heavy fouling waters. Using Ablative Copolymer Technology, the coating slowly wears away with use, continually exposing fresh biocide at the surface. This controlled erosion helps prevent marine growth while eliminating the heavy paint build-up and aggressive sanding associated with many hard bottom paints.\u003c\/p\u003e\n\u003cp\u003eWith a higher copper content and a built-in Slime Fighter additive, ACT is very effective at controlling shell fouling such as barnacles and zebra mussels, as well as weed, slime and algae. It can be used on fiberglass, wood and properly primed metal hulls (not aluminum) in fresh, salt and brackish water, making it a versatile choice for a wide range of powerboats and sailboats.\u003c\/p\u003e\n\u003cp\u003eAvailable in popular colors including black, blue, red, green and brown, ACT is a go-to ablative paint for boaters and boatyards looking for reliable performance and easier maintenance between haul-outs.\u003c\/p\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eBest Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-season antifouling protection for powerboats and sailboats\u003c\/li\u003e\n\u003cli\u003eBoats kept in moderate to heavy fouling waters (algae, slime, barnacles, zebra mussels)\u003c\/li\u003e\n\u003cli\u003eFresh, salt, and brackish water marinas and moorings\u003c\/li\u003e\n\u003cli\u003eOwners who want an ablative coating that minimizes paint build-up and sanding at recoat time\u003c\/li\u003e\n\u003cli\u003eFiberglass, wood, and properly primed steel or lead hulls below the waterline (not suitable for aluminum)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAblative Copolymer Technology:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCoating wears away in a controlled manner during use, continuously exposing fresh biocide and helping prevent premature wear-through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh copper content with Slime Fighter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFormulated to control hard growth such as barnacles and zebra mussels and soft growth like weed, slime and algae, keeping the hull cleaner for longer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced paint build-up:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBecause the film gradually erodes, there is less old paint to sand off at recoat time compared to many hard bottom paints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeason-to-season protection:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProvides dependable single-season protection when applied at the recommended film thickness and coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-water versatility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCan be used in fresh, salt, and brackish waters, ideal for boats that move between different environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible application:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCan be applied by brush, roller, or airless spray over most existing antifouling coatings that are in sound condition, following Interlux compatibility guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eApplication \u0026amp; System Overview\u003c\/h3\u003e\n\u003cp\u003eInterlux ACT can be applied over most well-adhered antifouling paints or as part of an Interlux system over properly prepared bare substrates. Always read the product label and technical datasheet before starting your bottom paint project.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFiberglass, wood, and properly primed steel or lead below the waterline (not for aluminum hulls or drives).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExisting antifouling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfirm compatibility using the Interlux antifouling compatibility chart. The existing coating must be aged, firmly adhered, and in good condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eApply a minimum of two full coats, with an extra stripe coat on high-wear areas such as the waterline, chines, leading edges and rudders. Three coats are recommended on bare wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethods:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eApply by brush, 3\/8\" nap solvent-resistant roller, or airless spray using equipment suitable for solvent-based marine coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStir or shake ACT thoroughly before and during application to keep the copper and resins evenly mixed. Thin only if necessary, and never more than the maximum amount specified on the label.\u003c\/p\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eSurface Preparation Overview\u003c\/h3\u003e\n\u003cp\u003eProper surface preparation is critical to adhesion and antifouling performance. The summary below should be used in conjunction with the full Interlux instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously painted surfaces – good condition\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScrub the bottom to remove slime, salts and loose growth, then rinse and allow to dry.\u003c\/li\u003e\n\u003cli\u003eSand the existing coating with 80-grit wet-or-dry paper as recommended to create a smooth, dull surface.\u003c\/li\u003e\n\u003cli\u003eRemove all sanding residue and apply the recommended number of coats of ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously painted surfaces – poor condition\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely remove loose, flaking, or excessively built-up antifouling paint.\u003c\/li\u003e\n\u003cli\u003eFor fiberglass and wood, use an appropriate paint remover such as Interstrip 299E; for steel, sandblast to near white metal.\u003c\/li\u003e\n\u003cli\u003eOnce the substrate is clean and sound, follow the appropriate bare fiberglass, bare wood, or primed metal system before applying ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove mold-release agents and wax with the recommended Interlux fiberglass prep products.\u003c\/li\u003e\n\u003cli\u003eFair any imperfections with a suitable marine fairing compound.\u003c\/li\u003e\n\u003cli\u003eFollow either the no-sand, sanding, or blister-prevention system recommended by Interlux, typically involving a primer or barrier coat such as InterProtect® 2000E before applying ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand the surface smooth with 80-grit paper and remove sanding dust.\u003c\/li\u003e\n\u003cli\u003eApply the first coat of ACT thinned slightly with the recommended thinner to aid penetration, then apply additional full-strength coats as directed.\u003c\/li\u003e\n\u003cli\u003eFill seams if needed with an appropriate seam compound before finishing with full coats of ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrimed steel or lead\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrime bare metal below the waterline according to Interlux recommendations.\u003c\/li\u003e\n\u003cli\u003eWithin the primer’s overcoat window, apply the specified number of coats of ACT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eApplication Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply only when the product and surface temperatures are at or above the minimum temperature specified on the label (typically 50°F \/ 10°C and above).\u003c\/li\u003e\n\u003cli\u003eUse quality solvent-resistant rollers and brushes designed for marine coatings.\u003c\/li\u003e\n\u003cli\u003eRespect the stated drying and recoat times between coats and before launching the boat.\u003c\/li\u003e\n\u003cli\u003eDo not apply ACT over tin-based copolymer antifouling paints.\u003c\/li\u003e\n\u003cli\u003eAfter haul-out, clean the coated surface before relaunching to help reactivate the film and maintain performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways consult the full\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"ACT Bottom Paint Technical Data Sheet\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Interlux-ACT-Bottom-Paint-Application-Instructions.pdf\" target=\"_blank\"\u003eInterlux ACT technical datasheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand product label for complete preparation, application, safety, and dry-time information before beginning your bottom painting project.\u003c\/p\u003e\n\u003ch3 class=\"classyunicodedone\"\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use Interlux ACT on aluminum hulls or outdrives?\u003c\/strong\u003e\u003cbr\u003eNo. Interlux ACT is not recommended for aluminum hulls, outdrives, or underwater aluminum components. It is designed for use on fiberglass, wood, and properly primed steel or lead below the waterline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs ACT suitable for freshwater and brackish water as well as saltwater?\u003c\/strong\u003e\u003cbr\u003eYes. ACT is formulated as a single-season ablative antifouling paint that can be used in fresh, salt, and brackish waters when applied at the recommended film thickness and coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply ACT over my existing bottom paint?\u003c\/strong\u003e\u003cbr\u003eIn many cases, yes. ACT can be applied over most existing antifouling paints that are aged, tightly adhered, and in good condition. The bottom should be cleaned and prepared as directed, and you should always refer to the Interlux antifouling compatibility chart before overcoating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats of Interlux ACT do I need?\u003c\/strong\u003e\u003cbr\u003eMost boats require at least two full coats of ACT for proper single-season protection, with an additional stripe coat on high-wear areas such as the waterline, chines, rudders, and leading edges. Bare wood and boats in heavy fouling areas may benefit from an extra coat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before launch after applying ACT?\u003c\/strong\u003e\u003cbr\u003eDry and launch times depend on temperature and conditions, but under typical warm-weather conditions you can usually launch the boat the next day after the final coat. Always follow the specific dry-time guidance on the Interlux product label and technical datasheet for your conditions.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"BLACK \/ QT","offer_id":43098110722182,"sku":"ILX-Y7790U-QT","price":63.07,"currency_code":"USD","in_stock":true},{"title":"BLACK \/ Gal.","offer_id":43098110754950,"sku":"ILX-Y7790U-1","price":194.99,"currency_code":"USD","in_stock":true},{"title":"BLUE \/ Gal.","offer_id":43098110787718,"sku":"ILX-Y6690U-1","price":194.99,"currency_code":"USD","in_stock":true},{"title":"BLUE \/ QT","offer_id":43098110820486,"sku":"ILX-Y6690U-QT","price":63.07,"currency_code":"USD","in_stock":true},{"title":"BROWN \/ Gal.","offer_id":43098110853254,"sku":"ILX-Y8890U-1","price":194.99,"currency_code":"USD","in_stock":true},{"title":"GREEN \/ Gal.","offer_id":43098110886022,"sku":"ILX-Y5590U-1","price":194.99,"currency_code":"USD","in_stock":true},{"title":"RED \/ Gal.","offer_id":43098110918790,"sku":"ILX-Y4490U-1","price":194.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/ACT__40018_1.jpg?v=1770419861"},{"product_id":"aqua-one","title":"Interlux Aqua One Ablative Antifouling Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Aqua One Ablative Antifouling Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux\u003cspan\u003e \u003c\/span\u003eis a leading manufacturer of antifouling paint and has been protecting boats with their complete line of protective paints for over a century. Their name is synonymous with unmatched quality and protection.\u003c\/p\u003e\n\u003cp\u003eInterlux Aqua One is a cost-effective ablative antifouling paint and is known for its self-polishing attributes. It can easily be applied with a roller or brush. Aqua One is manufactured with the latest technology in ablative paints to provide comprehensive coverage in all water types. It is designed to limit build-up to avoid sanding between applications.\u003c\/p\u003e\n\u003cp\u003eInterlux Aqua One Ablative Antifouling Paint is a water-based paint that is environmentally safe. It contains a low VOC which produces less odor, making it safe to use indoors and improves drying time. Application is suggested for below the waterline. Interlux Aqua One is not suitable for Aluminum\/alloy or zinc spray materials. Applying over soft antifouling paints is not recommended. It is safe to use on GRP, wood, steel, iron, lead, and over most soft antifouling paints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Protection\u003c\/strong\u003e: The latest in enhanced technology that combines powerful antifouling performance with outstanding protection in all waters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Apply:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEasy to use with brush or roller, indoors or outdoors, and has low odor and VOC emissions. Fast drying times for year-around use and launch. Ablative action wears away with use, minimizing build up and avoiding heavy sanding between applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmentally Responsible:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe solution for boat owners looking for protection, performance and fuel efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArea: Below the waterline\u003c\/li\u003e\n\u003cli\u003eFinish\/Sheen: Matte\u003c\/li\u003e\n\u003cli\u003eSuitable for Aluminum: No\u003c\/li\u003e\n\u003cli\u003eCoverage: 375 sq. ft\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 138 g\/l average\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAirless spray, Airmix, Brush, or Roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2-3 by brush\/roller. Bare wood: 3 coats (first thinned).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e375 ft2\/gl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended DFT per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended WFT per Coat:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater. Thin no more than 10%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Interlux Aqua One Ablative Antifouling Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"2\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDrying\/Overcoating Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTouch Dry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eImmersion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eOvercoat by (min)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e41°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 hours\u003c\/td\u003e\n\u003ctd\u003e48 hours\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e59°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 hours\u003c\/td\u003e\n\u003ctd\u003e8 hours\u003c\/td\u003e\n\u003ctd\u003e5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e73°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 hours\u003c\/td\u003e\n\u003ctd\u003e6 hours\u003c\/td\u003e\n\u003ctd\u003e4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e95°F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003ctd\u003e6 hours\u003c\/td\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePainted Surfaces in Good Condition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove all traces of loose paint and contamination by sanding the entire surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePainted Surfaces in Poor Condition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely remove all old antifouling paint using Interstrip 299E for fiberglass and wood.\u003c\/li\u003e\n\u003cli\u003eSandblast to near white metal for steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove mold release wax using Fiberglass Surface Prep YMA601V.\u003c\/li\u003e\n\u003cli\u003eFill any surface imperfections with Interlux Watertite.\u003c\/li\u003e\n\u003cli\u003eFollow one of the application systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - No Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface using the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Interlux Interprotect 2000E.\u003c\/li\u003e\n\u003cli\u003eFollowing overcoating guidelines for the primer, apply at least two coats of Interlux Aqua One allowing appropriate drying times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface using the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply at least two coats of Interlux Aqua One allowing appropriate drying times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Blister Prevention System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface following the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper and remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply Interprotect 2000E to a thickness of 10 mils.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grit paper then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply the first coat of Interlux Aqua One thinned by 10% with water.\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Sea Compound Brown 30.\u003c\/li\u003e\n\u003cli\u003eApply 2 more coats of Aqua-One unreduced, allowing the appropriate dry times between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCan be applied over GRP, Wood, Steel\/Iron, and Lead. Do not use on aluminum\/alloy or zinc sprayed metals. Interlux Aqua One can be applied over most solvent-based antifoulings. Do not apply over soft antifouling paints.\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Aqua_One_Technical_Data_Sheet.pdf.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"50\" height=\"48\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Aqua_One_Technical_Data_Sheet.pdf.pdf?v=1770916769\"\u003e\u003cstrong\u003eClick Here to Download Aqua One Antifouling Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Qt","offer_id":43098111246470,"sku":"ILX-YBE179Q","price":53.28,"currency_code":"USD","in_stock":true},{"title":"Black \/ Gal","offer_id":43098111279238,"sku":"ILX-YBE179G","price":148.96,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098111312006,"sku":"ILX-YBE169G","price":148.96,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098111344774,"sku":"ILX-YBE169Q","price":53.28,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098111377542,"sku":"ILX-YBE159G","price":148.96,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098111410310,"sku":"ILX-YBE149G","price":148.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/interlux_aqua_one_photo__87395.jpg?v=1770916814"},{"product_id":"eco-hrt-1","title":"Pettit ECO HRT Copper-Free Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit ECO Hybrid Reactive Technology (HRT) Copper-Free Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit ECO HRT Copper-Free Antifouling Paint is engineered with the latest technology available to create a strong hybrid paint film able to handle the harshest marine environments without building up over time. Pettit HRT ECO’s smooth durable paint surface is designed to wear away over time thereby eliminating paint build up as well as the need for sanding. Pettit HRT ECO Copper-Free Bottom Paint is safe for use on any aluminum-hulled boat. This copper-free bottom paint provides excellent antifouling protection; hauling and relaunching won't reduce its effectiveness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is HRT?\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eHybrid Reactive Technology utilizes high-density biocide to maximize effectiveness. That along with film modifiers to reduce yearly build-up, it can maintain color consistency and lower weight impact on the water vessel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is ECO?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eECO means the paint uses Econea instead of copper. Econea is a copper free biocide that provides great protection at very low concentrations. Pettit HRT ECO contains 6% Econea which has been shown to be as effective as bottom paints made with roughly 50% copper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in gallons\u003c\/li\u003e\n\u003cli\u003eCopper free\u003c\/li\u003e\n\u003cli\u003eSafe for aluminum boats\u003c\/li\u003e\n\u003cli\u003eEconomical hybrid protection\u003c\/li\u003e\n\u003cli\u003eSmooth durable polishing finish\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eSingle Season Antifouling Paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eActive Ingredients:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6% Econea\u003c\/li\u003e\n\u003cli\u003e4.8% Zinc Omadine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1200 Blue, 1300 Pontoon Gray, 1800 Black\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much ECO HRT do I need for my boat?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 Gallon Pettit ECO HRT Copper-Free Antifouling Paint covers 500 Sq Ft\u003c\/li\u003e\n\u003cli\u003eBoat Length X Width X .85 = Sq Ft per coat of paint (Example: 30ft boat 8.5 wide is 216.75 Sq Ft Per Coat)\u003c\/li\u003e\n\u003cli\u003eMultiple Sq Ft by Number of Coats 2-3 for total number of Sq ft for the job.\u003c\/li\u003e\n\u003cli\u003eWholesale Marine would recommend 1 Gallon for this Job. 2 Coats + Some Extra for Touch Up or waste.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Pettit ECO HRT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePettit ECO HRT Copper-Free Antifouling Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap roller cover. Apply using thin coats. ECO HRT has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEggshell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e500 ft2\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 minimum per season with additional coat at waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.7 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.5 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\"\u003e120 Brushing Thinner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePettit HRT ECO can be applied over most aged hard and ablative antifouling coatings.\u003c\/li\u003e\n\u003cli\u003eOld tin copolymers must be removed completely or sealed with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-specialty-tiecoat-metal-marine-primer-for-all-paint-types.html\"\u003ePettit 6627 Tie-Coat Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ebefore applying this product.\u003c\/li\u003e\n\u003cli\u003eIf the previous coating is in good condition, thoroughly sand with 80 grit sandpaper then solvent clean with Pettit 120 Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of ECO HRT.\u003c\/li\u003e\n\u003cli\u003eIf the previous coating is soft or in poor condition, remove to the bare surface by sanding or using paint remover. Proceed with an appropriate bare system as described below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-bio-blue-marine-hull-surface-prep-79179.html\"\u003e92 Bio-Blue Hull Surface Prep\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor de-waxed several times with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-bottom-prep-fiberglass-marine-dewaxer.html\"\u003ePettit D-95 Dewaxer\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eProceed with either sanding method, or one of the non-sanding methods below:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSanding Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter the surface has been de-waxed, sand thoroughly with 8 grit production paper to a dull, frosty finish and rewash the sanded surface with Pettit 120 Thinner to remove sanding residue. Then apply two thin coats of ECO HRT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Sanding Method (1):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePrep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit D95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip- Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of Pettit HRT ECO .\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Sanding Method (2):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThoroughly clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a coarse Scotch-Brite pad in a swirling motion. Thoroughly rinse all residue from the surface and let dry. Then apply one coat of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\"\u003ePettit-Protect High Build Epoxy Primer\u003c\/a\u003e. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of ECO HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBare wooden hulls should be sanded thoroughly with 80 grit sandpaper and wiped clean of sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-specialty-tiecoat-metal-marine-primer-for-all-paint-types.html\"\u003e6627 Tie-Coat Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ethinned 25% with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-epoxy-marine-thinner.html\"\u003e97 Epoxy Thinner\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003edirectly to the bare wood. Allow 4 hours to dry.\u003c\/li\u003e\n\u003cli\u003eApply two thinned coats of ECO HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Steel and Cast Iron\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt; remove loose rust and scale from the metal surface.\u003c\/li\u003e\n\u003cli\u003eScrape, sandblast or wire brush to 2-3 mil profile. Immediately clean the surface using a vacuum or fresh air blast.\u003c\/li\u003e\n\u003cli\u003eApply two coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-6980-rustlok-steel-anti-corrosive-marine-primer-79634.html\"\u003ePettit 6980 Rustlok Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efollowed by two to three coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\"\u003ePettit 4700\/4701 High Build Epoxy Primer.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFollow with two thin coats of Pettit HRT ECO.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel, Bronze, Lead, and Non-Aluminum Alloys\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent clean then abrade to clean bright metal by sanding with 60-80 grit sandpaper, sandblasting or wire brushing.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-prop-coat-barnacle-barrier-aerosol\/\"\u003eProp Coat Barnacle Barrier 1792\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin coats of ECO HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor maximum corrosion resistance, sandblast to clean, bright metal and remove blasting residue with clean, dry air or brush.\u003c\/li\u003e\n\u003cli\u003eApply one to two coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-alumaprotect-epoxy-barrier-coat-primer\/\"\u003ePettit 4400\/4401 Aluma Protect Epoxy Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efollowed by two coats of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\"\u003ePettit Protect High Build Epoxy Primer.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of ECO HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe above system utilizes Aluma Protect to form the most effective barrier over roughed aluminum. Aluma Protect provides maximum resistance to fresh or salt water, eliminating corrosion. Following with Pettit Protect creates an impenetrable shell making this a lifestyle system free of corrosion.\u003c\/p\u003e\n\u003cp\u003eAbove information sourced from Pettit's ECO HRT Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-ECO-HRT-Bottom-Paint-Application-Instructions.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"53\" height=\"51\"\u003e\u003cstrong\u003eClick to Download Pettit ECO HRT Copper Free Antifouling Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/5067e860-e4c7-013e-f544-2ec1a3f21564\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098117308550,"sku":"PET-1800G","price":232.13,"currency_code":"USD","in_stock":false},{"title":"Blue \/ Gal","offer_id":43098117341318,"sku":"PET-1200G","price":232.13,"currency_code":"USD","in_stock":false},{"title":"Pontoon Gray \/ Gal","offer_id":43103305007238,"sku":"PET-1300G","price":232.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/ECO_HRT_Copper-Free_Bottom_Paint__40814.jpg?v=1770419140"},{"product_id":"fiberglass-bottomkote-nt","title":"Interlux Fiberglass Bottomkote NT","description":"\u003ch2 class=\"classyunicodedone\"\u003e\n\u003cstrong\u003eInterlux Fiberglass Bottomkote NT\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eAntifouling Marine Paint\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-5f1ba9b9-7fff-b342-f123-94dc64fbd4ef\"\u003e\u003cstrong\u003eGet the best of both worlds with Interlux Fiberglass Bottomkote NT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e, a hybrid antifouling paint that combines the durability of a hard coating with the benefits of a slow-polishing ablative formula\u003c\/strong\u003e. \u003c\/span\u003e\u003cspan\u003eMade for long-lasting protection, Interlux Fiberglass Bottomkote reduces paint buildup while maintaining a smooth, fuel-efficient hull. It's ideal for saltwater and freshwater applications, offering excellent coverage and adhesion to fiberglass surfaces. Its innovative technology ensures consistent performance throughout the season, making it a go-to choice for boaters seeking reliable antifouling protection with minimal maintenance. \u003c\/span\u003e\u003cspan\u003eChoose from red, green, blue, or black.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual resin formulation combines and optimizes the benefits of hard and ablative paints.\u003c\/li\u003e\n\u003cli\u003eSurface continuously smooths with use, thereby providing a fast, fuel efficient coating\u003c\/li\u003e\n\u003cli\u003eFast drying - paint and launch on the same day\u003c\/li\u003e\n\u003cli\u003eUniversal, Interlux Fiberglass Bottomkote NT is a cost-effective choice for all power and sail boats in all waters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e400 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e2 minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e449 g\/lt - maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e1 US Quart, 1 US Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYBB349 Red, YBB359 Green, YBB369 Blue, YBB379 Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ecuprous oxide:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e25%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003e\u003cstrong\u003eSpecial Thinner 216\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For thinning or surface prep\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-brush-ease-marine-paint-flow-enhancer.html\"\u003e\u003cstrong\u003eBrush-Ease 433\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For thinning or surface prep\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-interprotect-2000e-epoxy-marine-barrier-coat-kit-79094.html\"\u003e\u003cstrong\u003eInterProtect 2000E\u003c\/strong\u003e\u003c\/a\u003e- Universal primer for above \u0026amp; below waterline\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003e\u003cspan lang=\"EN\"\u003eHow to Apply Interlux Fiberglass Bottomkote NT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eApply Interlux Fiberglass Bottomkote NT over existing antifouling paints provided the old coating is tightly adhered and is undamaged. Use Fiberglass Bottomkote NT on fiberglass, wood, or properly primed steel and lead. Unsuitable for use on tin-based copolymer antifouling paints. Use a minimum of 2 coats. Shake\/stir paint thoroughly prior to applying.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods\u003c\/strong\u003e: Roller, Brush, Airless Spray, or Conventional Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 mils (4.1 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e400 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 95°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSpecial Thinner 216 or Brush-Ease 433\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"98\"\u003e\n\u003cp align=\"center\"\u003eTemp\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"178\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"186\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"98\"\u003e\n\u003cp align=\"center\"\u003e95°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp align=\"center\"\u003e1\/2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"178\"\u003e\n\u003cp align=\"center\"\u003e1 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"186\"\u003e\n\u003cp align=\"center\"\u003e3 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"98\"\u003e\n\u003cp align=\"center\"\u003e75°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp align=\"center\"\u003e1 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"178\"\u003e\n\u003cp align=\"center\"\u003e2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"186\"\u003e\n\u003cp align=\"center\"\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"98\"\u003e\n\u003cp align=\"center\"\u003e60°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp align=\"center\"\u003e2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"178\"\u003e\n\u003cp align=\"center\"\u003e4 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"186\"\u003e\n\u003cp align=\"center\"\u003e10 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation \u0026amp; Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces (Good Condition)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRefer to the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Interlux-Antifouling-Compatibility-Chart.pdf\"\u003eInterlux Antifouling Compatibility Chart\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand prepare the surface as required.\u003c\/li\u003e\n\u003cli\u003eApply at least 2 coats of Fiberglass Bottomkote NT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces (Poor Condition)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely remove all old antifouling paint using Interstrip 299E for fiberglass and wood.\u003c\/li\u003e\n\u003cli\u003eFor steel, sandblast to near white metal.\u003c\/li\u003e\n\u003cli\u003eFollow the appropriate application systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove mold release wax and other contaminants to ensure that the antifouling paint properly adheres to the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove mold release wax using either\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-fiberglass-marine-surface-prep-mold-release-remover-79097.html\"\u003eFiberglass Surface Prep YMA601V\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-fiberglass-solvent-boat-wash-wax-remover.html\"\u003eFiberglass Solvent Wash 202\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFill any surface imperfections with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-watertite-2-part-epoxy-marine-filler-compound-38170.html\"\u003eInterlux Watertite YAV135\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eAfter the surface has been cleaned, follow one of the Fiberglass application systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - No Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-fiberglass-marine-surface-prep-mold-release-remover-79097.html\"\u003eFiberglass Surface Prep YMA601V\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eApply one coat of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-interprotect-2000e-epoxy-marine-barrier-coat-kit-79094.html\"\u003eInterlux InterProtect 2000E\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Sanding System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand the entire surface well with 80 grit paper until flat matte finish is obtained.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Interlux Bottomkote NT allowing appropriate drying times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grit paper, then remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply the first coat of Interlux Fiberglass Bottomkote NT thinned by 10% with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eSpecial Thinner 216\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-brush-ease-marine-paint-flow-enhancer.html\"\u003eBrush-Ease 433\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFill seams with Interlux Seam Compound 30 (if necessary)\/\u003c\/li\u003e\n\u003cli\u003eApply 2 or more coats of Interlux Fiberglass Bottomkote NT unthinned, allowing for appropriate dry times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThin only if necessary and do not thin more than 10%.\u003c\/li\u003e\n\u003cli\u003eFor airless spray, use tip size 0.53-0.66 mm\/21-26 thou. Use pressure 170-204 bar\/2500-3000 psi.\u003c\/li\u003e\n\u003cli\u003eFor conventional spray, use pressure pot tip size 1.8-2.2 mm\/70-85 thousand. Use pressure 4.08-4.76 bar\/60-70 psi (gun pressure), 10-15 psi (pot pressure).\u003c\/li\u003e\n\u003cli\u003eFor roller application, use a 3\/8\" nap solvent resistant roller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Fiberglass_Bottomkote_NT_Data_Data_Sheet.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"42\" height=\"40\"\u003e\u003c\/strong\u003e\u003cstrong\u003eClick Here to Download Interlux Fiberglass Bottomkote NT Datasheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Gal","offer_id":43098114785414,"sku":"ILX-YBB-379G","price":138.83,"currency_code":"USD","in_stock":true},{"title":"Black \/ Qt","offer_id":43098114818182,"sku":"ILX-YBB-379Q","price":50.02,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098114850950,"sku":"ILX-YBB-369Q","price":50.02,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098114883718,"sku":"ILX-YBB-369G","price":138.83,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098114916486,"sku":"ILX-YBB-359G","price":138.83,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098114949254,"sku":"ILX-YBB-349G","price":138.83,"currency_code":"USD","in_stock":true},{"title":"Red \/ Qt","offer_id":43098114982022,"sku":"ILX-YBB-349Q","price":50.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/interlux_fiberglass_bottomkote_NT_photo__36037.jpg?v=1770152166"},{"product_id":"hydrocoat-eco","title":"Pettit Hydrocoat Eco Ablative Antifouling Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Hydrocoat Eco Ablative Antifouling Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-e26b3029-7fff-27be-9c74-469a082a38b2\"\u003e\u003cstrong\u003eGo green without sacrificing performance with Pettit Hydrocoat Eco, a copper-free antifouling paint formulated for superior multi-season protection.\u003c\/strong\u003e\u003cspan\u003e Using advanced Econea biocide technology, this water-based ablative formula effectively prevents marine growth while reducing environmental impact. Its self-polishing action minimizes paint buildup, ensuring a smooth, fuel-efficient hull. Perfect for boats in both saltwater and freshwater, it applies easily and cleans up with just soap and water. Hydrocoat Eco is the ideal choice for eco-conscious boaters seeking reliable antifouling performance. \u003c\/span\u003e\u003cspan\u003eAvailable in white, blue, black, or brown.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePettit’s hydrocoat formula has been leading the way in marine ablative technology for 20 years.  These water-based paints are industry leaders, and the Pettit Hydrocoat Eco is the newest breakthrough in ablative antifouling paints. It is formulated with the newest, groundbreaking water-based copolymer formula.\u003c\/p\u003e\n\u003cp\u003ePettit Hydrocoat Eco uses Pettit’s exclusive organic biocide formula - Econea. This copper and metal-free biocide bottom paint is raising the bar in ablative antifouling paints. The Pettit Hydrocoat Eco provides multi-season protection against the harshest of conditions. The paint film slowly wears away with use and is effective in and out of the water.  The Pettit Hydrocoat Eco is a tough slime-fighting inhibitor that is a great choice for jet drives, outdrives, and outboard motors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy application and cleanup with soap \u0026amp; water\u003c\/li\u003e\n\u003cli\u003eWater-based,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecopper-free\u003c\/strong\u003e, self-polishing ablative antifouling paint\u003c\/li\u003e\n\u003cli\u003eCo-polymer ablative technology eliminates sanding and paint build-up\u003c\/li\u003e\n\u003cli\u003eDual-biocides provide outstanding multi-season protection in all conditions\u003c\/li\u003e\n\u003cli\u003eUses the power of organic ECONEA™ for better protection and a greener earth\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eBiocide: 6.0% ECONEA\u003c\/li\u003e\n\u003cli\u003eAdditives: 4.8% Zinc Pyrithione\u003c\/li\u003e\n\u003cli\u003eCoverage: 430sq.ft.\/gal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eHydrocoat ECO is comparable to Interlux Micron CF and Pettit Ultima Eco\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Hydrocoat Eco Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Hydrocoat Eco paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Hydrocoat ECO Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Hydrocoat ECO Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Hydrocoat Eco provides. (430 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Hydrocoat Eco has a coverage of 430 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Hydrocoat Eco Antifouling Paint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 minimum with additional coat at waterline recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness per Coat:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.4 mils (4.0 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50° F. Min. \/ 90°F. Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e\u003ccol span=\"4\" width=\"64\"\u003e\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" colspan=\"4\" width=\"256\" height=\"20\"\u003e\u003cstrong\u003eDry Time* (HOURS)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003e90°\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e1\/4 HR\u003c\/td\u003e\n\u003ctd\u003e1.5 HR\u003c\/td\u003e\n\u003ctd\u003e12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003e70°\u003c\/td\u003e\n\u003ctd\u003e1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003e50°\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e48 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo paint old, hard antifoulings, thoroughly wipe down the surface with 120 Brushing Thinner, pying particular attention to waterline areas, then sand painted surface with 80 grit sandpaper. Wipe clean of sanding residue with water and apply hydrocoat Eco. Old tin or copper copolymers or Teflon based antifoulings should be sanded thoroughly with 80 grit sandpaper to remove the chalky outer surface, wiped clean of sanding residue, and then may be over coated directly with Hydrocoat Eco. Traditional, soft antifoulings should be removed before applying Hydrocoat Eco.*The above dry times are minimums. Hydrocoat Eco may be recoated after the minimum time shown. There is no maximum dry time before launching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer or 120 Brushing Thinner. Sand thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash the sanded surface with 120 Brushing Thinner to remove sanding residue. Then apply two or three coats of Hydrocoat Eco, following application instructions. Careful observation of the above instructions will help ensure long term adhesion of this and subsequent years’ antifouling paint.\u003c\/p\u003e\n\u003cp\u003eTo eliminate the sanding operation, prep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit 95 Dewaxer only. Then apply one thin coat of Pettit 6998 Skip-Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three coats of Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003eEasy 2-Step Sandless Method - Thoroughly clean and prep hull using 92 Bio-Blue and a Scotch-brite pad as described above. Make sure that the entire surface has a dull, frosty finish. Wipe surface to remove any excess moisture and apply two coats of Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBarrier Coat:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFiberglass bottoms potentially can form osmotic blisters within the gelcoat and into the laminate. To render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method) then apply three coats of Pettit Protect 4700\/4701 High Build Epoxy Primer per label directions. Apply two or three finish coats of Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlistered Fiberglass:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSee Pettit Technical Bulletin TB-1000 Gelcoat Blister Repair and Prevention Specification for detailed instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare Aluminum:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSandblast to clean, bright metal and remove blasting residue with clean, dry compressed air or a clean brush. Immediately apply three coats of Pettit 4400\/4401 Aluma Protect Epoxy Primer followed by two finish coats of this product. Read and follow carefully the instructions on the Pettit 4400\/4401 Aluma Protect Epoxy Primer label. If the surface to be painted is smooth aluminum, apply one coat of 6455\/044 Metal Primer and allow to dry for 2 hours, then apply two finish coats of this product. Read and follow carefully the instructions for application and top-coating on the 6455\/044 primer label.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSand entire surface with 80 grit paper; wash clean with 120 Brushing Thinner. Apply a coat of Hydrocoat Eco thinned 25% with water, allow an overnight dry, lightly sand and wipe clean. Apply two finish coats of Hydrocoat Eco. Any metal parts must be primed before applying the bottom paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Hulls:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo remove loose rust and scale from the metal surface, scrape, sandblast or wire brush. Solvent clean the surface to remove grease and dirt then apply one or two coats of Pettit 6980 Rustlok* followed by two coats of Pettit 4700\/4701 High Build Epoxy Primer. Follow with Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnderwater Metal Parts:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAbrade to clean bright metal by scraping, sandblasting or wire brushing. Solvent clean and apply one thin coat of Pettit 6455\/044 Metal Primer*. Let dry two hours and apply two coats of Pettit 6627 Tie Coat Primer*. Let the second coat of 6627 Tie-Coat Primer dry at least four hours and apply Hydrocoat Eco.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*These are simplified systems for small areas. Please consult your Pettit representative or the Pettit Technical Department for more complex, professional systems. Always read the labels or tech sheets for all products specified herein before using.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Hydrocoat_ECO.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Hydrocoat_ECO.pdf\"\u003eClick to Download Pettit Hydrocoat Eco Antifouling Paint Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098116784262,"sku":"PET-1804G","price":393.31,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098116817030,"sku":"PET-1204G","price":393.31,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098116849798,"sku":"PET-1604G","price":393.31,"currency_code":"USD","in_stock":true},{"title":"White \/ Gal","offer_id":43098116882566,"sku":"PET-1104G","price":393.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Hydrocoat_Eco_Ablative_Antifouling_Paint__35743.jpg?v=1770151845"},{"product_id":"hydrocoat","title":"Pettit Hydrocoat Ablative Antifouling Paint","description":"\u003ch3 class=\"classyunicodedone\"\u003e\u003cstrong\u003e$25 Rebate Per Gallon on Pettit Hydrocoat\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e– Valid through May 31 (Limit 2 gallons per customer). \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/pettit-protect-your-adventure-rebate-tear-tab-2026.pdf?v=1772221726\" target=\"_blank\" title=\"Pettit Rebate Form\" rel=\"noopener\"\u003eDownload Rebate Form\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003ePettit Hydrocoat Antifouling Bottom Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eProtect your hull with Pettit Hydrocoat, an eco-friendly, water-based paint that delivers multi-season antifouling protection.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eThis ablative formula wears away gradually, preventing paint buildup while continuously exposing fresh biocide for long-lasting defense against marine growth. Ideal for use in saltwater and freshwater, Hydrocoat bottom paint applies smoothly with easy soap-and-water cleanup. With its low-VOC composition and durable finish, \u003c\/span\u003e\u003cspan\u003ePettit Hydrocoat\u003c\/span\u003e\u003cspan\u003e is a top choice for boaters seeking reliable antifouling without the harsh solvents. \u003c\/span\u003e\u003cspan\u003eAvailable in blue or black\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePettit Hydrocoat is an eco-friendly water-based marine bottom paint that meets all local and state regulations. It is formulated with no harsh smells or solvents. The Pettit Hydrocoat Antifouling Bottom Paint is the industry leader in water-based ablative antifouling paints. It is formulated to be self-polishing and no pre-sanding is required. Pettit Hydrocoat helps protect bottoms from frequent cleaning, bleaching, trailering, and launching that can wear down boat finishes.\u003c\/p\u003e\n\u003cp\u003ePettit Hydrocoat Antifouling Bottom Paint comes in blue and black color options and is sold by the gallon. Its water-based formula makes it easy to apply with a brush or roller, and clean-up is easy with just soap and water. Use on aluminum hulls or outdrives is not recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-polishing\u003c\/li\u003e\n\u003cli\u003e40% Cuprous Oxide\u003c\/li\u003e\n\u003cli\u003eCopolymer Ablative technology\u003c\/li\u003e\n\u003cli\u003ePTFE for a slick fast finish\u003c\/li\u003e\n\u003cli\u003eMulti-season Ablative\u003c\/li\u003e\n\u003cli\u003eMinimal Odor, Easy Clean-up with Water\u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly\u003c\/li\u003e\n\u003cli\u003eComparable to Interlux Micron CSC, and Pettit Horizons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Water-based ablative\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: 1240 Blue, 1840 Black\u003c\/li\u003e\n\u003cli\u003eDrying Time: To overcoat 3hrs; To launch; 6hrs. @ 70°F\u003c\/li\u003e\n\u003cli\u003eNumber of Coats Recommended: 2-3\u003c\/li\u003e\n\u003cli\u003eCoverage: 490 ft2\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 150 grams\/liter\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 40.43%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\"\u003ePettit Protect Epoxy Primer\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Primer for bare fiberglass applications\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\"\u003ePettit 120 Thinner\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e- For surface prep\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow Much Pettit Hydrocoat Waterbased Bottom Paint Do I Need for My Boat?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Hydrocoat paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e \u003cimg class=\"__mce_add_custom__\" title=\"pettit-hydrocoat-how-many-coats.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-hydrocoat-how-many-coats.jpg\" alt=\"pettit-hydrocoat-how-many-coats.jpg\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col type=\"1\" start=\"1\"\u003e\n\u003col type=\"1\" start=\"1\"\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Hydrocoat provides. (490 square feet per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Hydrocoat has a coverage of 490 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow To Apply Pettit Hydrocoat Antifouling Bottom Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePettit Hydrocoat is easily applied using a brush, roller, or sprayer. For rollers, use a high-quality short nap (maximum 3\/16\" nap) roller cover. Apply using thin coats, as over-application will cause surface imperfections and shorter wear. Before applying, mix the paint thoroughly. Clean and properly prepare surfaces prior to painting. TIP: For the smoothest possible finish: thin the paint 5-10% with clean fresh water. Wet the surface with fresh water. This will provide a truer color and smoother finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods\u003c\/strong\u003e: Brush, Roller, Airless or Conventional Spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 minimum with an additional coat at the waterline recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1.5 mils (3.75 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e490 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eClean, fresh water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"104\"\u003e\n\u003cp\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"175\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"183\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"104\"\u003e\n\u003cp\u003e90°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp\u003e1\/4 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"175\"\u003e\n\u003cp\u003e1-1\/2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"183\"\u003e\n\u003cp\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"104\"\u003e\n\u003cp\u003e70°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp\u003e1\/2 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"175\"\u003e\n\u003cp\u003e3 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"183\"\u003e\n\u003cp\u003e10 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"104\"\u003e\n\u003cp\u003e50°F\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"162\"\u003e\n\u003cp\u003e1 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"175\"\u003e\n\u003cp\u003e6 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"183\"\u003e\n\u003cp\u003e16 HR\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*The above dry times are minimums. Hydrocoat may be recoated after the minimum time shown. There is no maximum dry time before launching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf the previous coating is in good condition, thoroughly sand with 80-grit sandpaper then solvent clean with Pettit 120 Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003cli\u003eIf the previous coating is soft or in poor condition, remove it to the bare surface by sanding or using paint remover.\u003c\/li\u003e\n\u003cli\u003eProceed with an appropriate bare system as described below.\u003c\/li\u003e\n\u003cli\u003eOld tin or copper copolymers or Teflon-based antifoulings should be sanded thoroughly with 80-grit sandpaper to remove the chalky outer surface.\u003c\/li\u003e\n\u003cli\u003eWipe clean of sanding residue, then over-coat directly with Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAll fiberglass, regardless of age, should be thoroughly cleaned with Pettit 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D95 Dewaxer. Proceed with either the sanding method or the non-sanding method:\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAfter the surface has been dewaxed, sand thoroughly with 80-grit paper to a dull, frosty finish.\u003c\/li\u003e\n\u003cli\u003eRewash the surface with Pettit 120 Thinner to remove residue.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Pettit Hydrocoat Antifouling Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eNon-Sanding Method:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, de-wax, and etch the surface with Pettit 92 Bio-Blue Hull Surface Prep using a medium Scotch-Brite pad in a swirling motion.\u003c\/li\u003e\n\u003cli\u003eRinse all residue from the surface and let dry. Make sure the entire surface has a dull, frosty finish.\u003c\/li\u003e\n\u003cli\u003eWipe the surface to remove any excess moisture.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarrier Coats\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTo render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method).\u003c\/li\u003e\n\u003cli\u003eApply two or three coats of Pettit Protect High Built Epoxy Primer per label directions.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBare wooden hulls should be sanded thoroughly with 80-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eWipe clean of sanding residue with Pettit 120 Thinner.\u003c\/li\u003e\n\u003cli\u003eA coat of Pettit 6627 Tie-Coat Primer thinned 25% with Pettit 97 Epoxy Thinner should be applied directly to the bare wood.\u003c\/li\u003e\n\u003cli\u003eAllow to dry for four hours.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly sand with 80-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eIf priming is necessary on bare wood spots, apply a touch-up coat of Pettit 6627 Tie-Coat Primer thinned 25% with Pettit Epoxy Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats of Pettit Hydrocoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHydrocoat does not require sanding between coats.\u003c\/li\u003e\n\u003cli\u003eSlight variations in color and surface texture are not uncommon and will not affect performance.\u003c\/li\u003e\n\u003cli\u003eWhen spraying, do not thin Pettit Hydrocoat more than 10%, or inadequate paint film thickness will occur.\u003c\/li\u003e\n\u003cli\u003eBurnishing the surface to create a slicker finish should be done with 400-600 grit wet-or-dry sandpaper after the coating has dried for seven days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euse this product on aluminum hulls and outdrives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Hydrocoat.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003eClick to Download Pettit Hydrocoat Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Qt","offer_id":43098117570694,"sku":"PET-1840Q","price":97.59,"currency_code":"USD","in_stock":true},{"title":"Black \/ Gal","offer_id":43098117603462,"sku":"PET-1840G","price":266.95,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098117636230,"sku":"PET-1240G","price":266.95,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098117668998,"sku":"PET-1240Q","price":97.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/pettit_hydrocoat_photo__09101.jpg?v=1770151685"},{"product_id":"inflatable-boat-paint","title":"Pettit Inflatable Boat Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit Inflatable Boat Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit's Inflatable Boat Bottom Paint is a water-based paint that provides multi-season protection against algae, barnacles, and all types of marine and fresh water fouling. Its water-based formula results in a product that is easy to apply, environmentally responsive, and is safer to use. This bottom paint exceeds even the most stringent air pollution (VOC) regulations. Pettit's Inflatable Boat Bottom Paint withstands frequent trailering, beaching, and launching while offering excellent antifouling protection. This paint is resistant to cracking, peeling, and flaking and is suitable for use on PVC or Hypalon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater-based formula\u003c\/li\u003e\n\u003cli\u003eAblative technology eliminates sanding and paint build-up\u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly, easy to apply and cleanup with soap \u0026amp; water\u003c\/li\u003e\n\u003cli\u003eUnlimited dry time to launch - can be painted in fall or winter\u003c\/li\u003e\n\u003cli\u003eComplies with all air pollution (VOC) regulations\u003c\/li\u003e\n\u003cli\u003eContains PTFE which reduces drag\u003c\/li\u003e\n\u003cli\u003eSold in quarts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFinish: Flat\u003c\/li\u003e\n\u003cli\u003eCoverage: 430 sq. ft\/gal\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: 2 Minimum\u003c\/li\u003e\n\u003cli\u003eApplication Methods: Brush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003eVOC: 150 g\/l max.\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 25.25%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003ePettit 120 Brushing Thinner\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For surface prep\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-epoxy-marine-thinner.html\" target=\"_blank\"\u003ePettit 97 Epoxy Thinner\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e- For surface prep\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Inflatable Boat Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit's Inflatable Boat Bottom paint is very easily applied by brush, roller, or spray. It is necessary to thoroughly mix Pettit Inflatable Boat Bottom Paint prior to application. Before using, check sides and bottom of can to make sure all the pigment has been mixed in. When rolling, thin the paint approximately 5-10% with clean fresh water and wet the surface to be painted with clean fresh water as well. This aids the \"hold out\" of the coating, resulting in truer color and smoother finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods\u003c\/strong\u003e: Brush, Roller, Airless or Conventional Spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 minimum with additional coat at waterline recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDry Film Thickness: \u003c\/strong\u003e1.5 mils (3.75 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e430 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eClean, fresh water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  1\/4 HR\u003c\/td\u003e\n\u003ctd\u003e  1 HR\u003c\/td\u003e\n\u003ctd\u003e  12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  2 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  1 HR\u003c\/td\u003e\n\u003ctd\u003e  4 HR\u003c\/td\u003e\n\u003ctd\u003e  48 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRubberized Fabric Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWash surface to be painted with a mild detergent and water solution, then rinse thoroughly with clean water. Allow to dry.\u003c\/li\u003e\n\u003cli\u003ePour a moderate amount of of 97 Epoxy Thinner onto a bronze wood pad.\u003c\/li\u003e\n\u003cli\u003eChoose a small area and scrub the surface lightly but thoroughly. Wipe off any excess 97 Epoxy Thinner.\u003c\/li\u003e\n\u003cli\u003eRepeat the process until the entire surface to be painted has been scrubbed and wiped clean.\u003c\/li\u003e\n\u003cli\u003eApply a generous coat of Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003cli\u003eAllow the paint to dry to recoat and apply a second full coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eFiberglass Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWash the fiberglass with Pettit 97 Epoxy Thinner to remove grease and dirt.\u003c\/li\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper to a dull, frosty finish.\u003c\/li\u003e\n\u003cli\u003eRewash sanded surface with 97 Epoxy Thinner.\u003c\/li\u003e\n\u003cli\u003eApply at least two coats of Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Coated Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTo repaint surfaces painted with this product:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eScrub the finish with an abrasive pad and recoat with a fresh coat of Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo paint old, hard antifoulings:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly wipe down the surface with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eSand surface with 80 grit sandpaper. Wipe clean with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo paint old tin or copper copolymers or Teflon-based paints:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper to remove chalky outer surface.\u003c\/li\u003e\n\u003cli\u003eWipe clean of sanding residue.\u003c\/li\u003e\n\u003cli\u003eOvercoat directly with Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTraditional, soft antifoulings should be removed before applying Inflatable Boat Bottom Paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not use Pettit Inflatable Boat Bottom Paint on aluminum hulls, outdrives, or lower units.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-Inflatable-Boat-Bottom-Paint-Application-Instructions.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"61\" height=\"59\"\u003e\u003cstrong\u003eClick to Download Pettit Inflatable Boat Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"BLACK \/ Qt","offer_id":43098117832838,"sku":"PET-1841Q","price":66.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Inflatable_Boats_SKUs_-_black__62160.jpg?v=1770151560"},{"product_id":"micron-extra-spc","title":"Interlux Micron Extra SPC Antifouling Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eInterlux Micron Extra SPC Antifouling Paint\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInterlux is known for its high-quality antifouling paints that have been manufactured using only superior ingredients and developed for long-lasting results in all types of waters. Interlux Micron Extra Self Polishing Copolymer (SPC) antifouling paint is designed to provide premium multi-seasonal performance in every climate, from frigid to tropical. The paint’s SPC technology provides remarkable protection by slowly polishing away its laminated surface, whether docked or out on the water, to provide a smoother, more efficient hull while minimizing paint build up.\u003c\/p\u003e\n\u003cp\u003eInterlux Micron Extra SPC is suitable for all types of boats. It can be applied to fiberglass, wood, and previously antifouled surfaces, but is not recommended for aluminum boat bottoms. It is available in five popular colors. Two coats are recommended for complete coverage. When applied, Interlux Micron Extra SPC antifouling paint will dry with a matte finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eFor use on fiberglass, wood, and previously painted surfaces. NOTE: Do not use on aluminum.\u003c\/li\u003e\n\u003cli\u003eAntifouling paint offers multi-season protection 24\/7\/365\u003c\/li\u003e\n\u003cli\u003eMicron Extra SPC can be launched and relaunched without repainting\u003c\/li\u003e\n\u003cli\u003eThe Self Polishing Copolymer works at a constant rate for a smoother hull finish that offers greater efficiency\u003c\/li\u003e\n\u003cli\u003eIdeal for use in Brackish, Fresh, and Saltwater in both cold and tropical climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eMatte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 Coats minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 US Gallon, 1 US Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTheoretical Coverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush\/Roller: 414ft2\/gal | Spray: 276ft2\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003c\/strong\u003e450 Red, 451 Blue, 452 Black, 453 Dark Blue, 454 Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e328 g\/lt average\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eSpecial thinner 216\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- For wiping down previously painted surfaces and thinning\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-fiberglass-solvent-boat-wash-wax-remover.html\"\u003eFiberglass Solvent Wash 202\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- To clean bare fiberglass prior to application\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-interprotect-epoxy-barrier-coat-kit-white\/\"\u003eInterprotect\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Epoxy barrier for blister protection, prevention, and priming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"2\" cellpadding=\"2\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature F° (C°)*\u003c\/td\u003e\n\u003ctd\u003eTouch Dry\u003c\/td\u003e\n\u003ctd\u003eOvercoating\u003c\/td\u003e\n\u003ctd\u003eImmersion Time Minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e41°F (5° C)\u003c\/td\u003e\n\u003ctd\u003e1 Hour\u003c\/td\u003e\n\u003ctd\u003e16 Hours\u003c\/td\u003e\n\u003ctd\u003e24 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59°F (15° C)\u003c\/td\u003e\n\u003ctd\u003e45 Minutes\u003c\/td\u003e\n\u003ctd\u003e10 Hours\u003c\/td\u003e\n\u003ctd\u003e18 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F (23° C)\u003c\/td\u003e\n\u003ctd\u003e30 Minutes\u003c\/td\u003e\n\u003ctd\u003e6 Hours\u003c\/td\u003e\n\u003ctd\u003e12 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95­°F (35° C)\u003c\/td\u003e\n\u003ctd\u003e20 Minutes\u003c\/td\u003e\n\u003ctd\u003e4 Hours\u003c\/td\u003e\n\u003ctd\u003e8 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*If air temperature falls below 41°F (5°C) during the dry time prior to immersion, extend the dry times 12 hours minimum\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Interlux Micron Extra SPC Ablative Antifouling Pain\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eApplication Methods: Air atomized, Brush, Roller\u003c\/li\u003e\n\u003cli\u003eRecommended DFT per coat\u003c\/li\u003e\n\u003cli\u003eBrush\/Roller: 2.4mils dry per coat\u003c\/li\u003e\n\u003cli\u003eSpray: 3.6 mils dry per coat\u003c\/li\u003e\n\u003cli\u003eRecommended WFT per coat\u003c\/li\u003e\n\u003cli\u003eBrush\/Roller: 3.9 mils wet per coat\u003c\/li\u003e\n\u003cli\u003eSpray: 5.8 mils wet per coat\u003c\/li\u003e\n\u003cli\u003eMinimum Ambient Temperature: 41°F (5° C)\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient temperature: 95°F (35°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePreviously Antifouled Surfaces:\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eIn Good condition: Remove loose paint by sanding with 80 grit paper. Remove sanding residue\u003c\/li\u003e\n\u003cli\u003eIn Poor condition: Remove old antifouling paint completely before refinishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBare Fiberglass\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eIt is very important that bare fiberglass is properly prepared to prevent delamination of the antifouling paint. Begin by scrubbing the surface thoroughly with a stiff brush using soap and water to remove loose dirt and contamination.\u003c\/li\u003e\n\u003cli\u003eFlush with fresh water to remove the soap residue and allow it to dry.\u003c\/li\u003e\n\u003cli\u003eRemove mold release wax using one of the following Interlux products: Fiberglass Surface Prep or Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cli\u003eAfter the surface has been properly cleaned, follow one of the application systems below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiberglass No Sand System\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eClean the surface following the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eApply one coat of InterProtect 2000E or Fiberglass No-Sand Primer following the label instructions for applying the primer and overcoating with antifouling paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiberglass Sanding System\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eClean the surface following the preparation procedure above.\u003c\/li\u003e\n\u003cli\u003eSand the entire surface well with 80 grade paper until flat matte finish is obtained.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlister Prevention System\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eApply the InterProtect system for the prevention of blisters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBare Wood\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eSand with 80 grade paper.\u003c\/li\u003e\n\u003cli\u003eThen apply  the first coat reduced by 10% with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Seam Compound Brown 30.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Micron_Extra_SPC_Application-Instructions.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003eClick here for Interlux Micron Extra SPC Technical Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"BLACK \/ Gal.","offer_id":43098118127750,"sku":"ILX-YBC452G","price":394.52,"currency_code":"USD","in_stock":true},{"title":"BLACK \/ Qt","offer_id":43098118160518,"sku":"ILX-YBC452Q","price":157.8,"currency_code":"USD","in_stock":true},{"title":"BLUE \/ Qt","offer_id":43098118193286,"sku":"ILX-YBC451Q","price":161.03,"currency_code":"USD","in_stock":false},{"title":"GREEN \/ Gal.","offer_id":43098118226054,"sku":"ILX-YBC454G","price":394.52,"currency_code":"USD","in_stock":true},{"title":"RED \/ Gal.","offer_id":43098118258822,"sku":"ILX-YBC450G","price":402.56,"currency_code":"USD","in_stock":false},{"title":"DARK BLUE \/ Gal","offer_id":43103308021894,"sku":"ILX-YBC453G","price":402.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Interlux_Micron_Extra_SPC_photo__21470.jpg?v=1770151498"},{"product_id":"micron-navigator","title":"Interlux Micron Navigator w\/Biolux Antifouling Water Based Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Micron Navigator w\/Biolux Antifouling Water Based Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eInterlux Micron Navigator is a copper free antifouling paint with a water based formula. The Micron antifouling formula offers multi-season long lasting polishing protection. Dual utilization of Biolux and Econea boosts anitfouling performance in any conditions and salt water, fresh water, and brackish water. The fast drying formula has been engineered for application in  temperatures as low as 41° F. Micron Navigator is easily applied over most antifouling paints and can be sed on any substrate including primed underwater metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater based Copper Free formula\u003c\/li\u003e\n\u003cli\u003eUse on Fiberglass, Wood, Aluminum\u003c\/li\u003e\n\u003cli\u003eMulti-Season\u003c\/li\u003e\n\u003cli\u003eFast Dry Tech\u003c\/li\u003e\n\u003cli\u003eLow Temperature application\u003c\/li\u003e\n\u003cli\u003ePolishing Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: US Gallon or Quart\u003c\/li\u003e\n\u003cli\u003eRecommended usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: Black (YBD779), Blue (YBD769), Green (YBD759), Red (YBD749), White (YBD704)\u003c\/li\u003e\n\u003cli\u003eDrying time: 30 minutes Touch Dry; 2 hours Overcoat; 6 hours immersion @ 77°F\u003c\/li\u003e\n\u003cli\u003eNumber of Coats: 2 coats for multi-season performance when the recommended DFT is applied\u003c\/li\u003e\n\u003cli\u003eRecommended DFT per coat: 1.5 mils dry per coat\u003c\/li\u003e\n\u003cli\u003eRecommended WFT per coat: 4 mils wet per coat\u003c\/li\u003e\n\u003cli\u003eCoverage: 408 ft²\/gal - Brush\/Roller\u003c\/li\u003e\n\u003cli\u003eVOC: 8.89 g\/lt (average)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Interlux Micron Navigator w\/Biolux Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMixing: Shake or Stir throughly before use. Use a wooden or plastic stirring stick. Leave to stand for 10 minutes after stirring for air bubbles to disperse.\u003c\/li\u003e\n\u003cli\u003eThinner: thinning\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003erecommended unless for Bare Wood (see preparation section)\u003c\/li\u003e\n\u003cli\u003eOther: Antifouling coatings should only be vacuum sanded or wet sanded.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNever\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eburn off old antifouling coatings. True color will develop after immersion. To prevent premature failure, ensure correct amount of paint is applied using the coverage as a guide.\u003c\/li\u003e\n\u003cli\u003eApplication Methods: Brush, Roller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eGood Condition:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eRemove all traces of loose paint and contamination by sanding\u003c\/li\u003e\n\u003cli\u003eSand the entire surface well with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePoor Condition:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely remove all old antifouling paint with paint stripper and proceed\u003c\/li\u003e\n\u003cli\u003eProceed with the application system for bare work as described below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass (Polyester or Vinylester) Epoxy\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eScrub the surface with soap and water using a stiff brush\u003c\/li\u003e\n\u003cli\u003eApply Fiberglass Surface Prep YMA601V with a 3\/8\" nap roller\u003c\/li\u003e\n\u003cli\u003eDewax the surface working in 10x10 foot areas. Ensure the YMA601V is removed before drying. Scrub the Surface Prep with a 3M Doodlebug or brown Scotch-Brite pad.\u003c\/li\u003e\n\u003cli\u003eOnce all areas have been scrubbed use wet rags or high pressure rinse to remove all traces of the Fiberglass Surface Prep. *change rags frequently*\u003c\/li\u003e\n\u003cli\u003eWipe down with clean cloths, repeating the process until water no longer beads.\u003c\/li\u003e\n\u003cli\u003eThe surface must be clean and dry prior to application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Refer to the surface preparation instructions above before application*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Simple No Sand System\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eFollow the above Surface Preparation instructions\u003c\/li\u003e\n\u003cli\u003eApply the Micron Navigator within 4 hours of cleaning\u003c\/li\u003e\n\u003cli\u003eIf this time is exceeded rinse with fresh water and allow to dry\u003c\/li\u003e\n\u003cli\u003eIf exceeding 2 months between de-waxing and painting, repeat cleaning instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass - Blister Prevention System\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eFollow the above Surface Preparation instructions\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade (grit) paper\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003cli\u003eApply Interprotect 2000E to a thickness of 10 mils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarewood:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grade (grit) paper\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue\u003c\/li\u003e\n\u003cli\u003eApply the first coat of Micron Navigator thinned 10% with water\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Seam Comppound Brown 30\u003c\/li\u003e\n\u003cli\u003eApply 2 more coats of Micron Navigator unreduced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eAluminum\/Underwater Metals:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGritblast or sand with medium grade (grit) emery cloth to a bright metal finish and wipe clean\u003c\/li\u003e\n\u003cli\u003eApply one coat of Interprotect 2000E that has been thinned 15-20% with reducing solvent 2316N\u003c\/li\u003e\n\u003cli\u003eApply the interprotect the same day as blasting or sanding\u003c\/li\u003e\n\u003cli\u003eApply 3-4 additional coats of INterprotect 2000E, unthinned\u003c\/li\u003e\n\u003cli\u003eApply Micron Navigator following the recommended overcoating times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eFactory Finished Aluminum:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrime with Primocon\u003c\/li\u003e\n\u003cli\u003eApply 2 coats of Micron Navigator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eDry Times\u003c\/h2\u003e\n\u003ctable border=\"1\" cellspacing=\"2\" cellpadding=\"2\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e41° F\u003c\/td\u003e\n\u003ctd\u003e59° F\u003c\/td\u003e\n\u003ctd\u003e77° F\u003c\/td\u003e\n\u003ctd\u003e95° F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch Dry\u003c\/td\u003e\n\u003ctd\u003e1.5 hours\u003c\/td\u003e\n\u003ctd\u003e60 minutes\u003c\/td\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003ctd\u003e15 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvercoat\u003c\/td\u003e\n\u003ctd\u003e6 hours\u003c\/td\u003e\n\u003ctd\u003e4 hours\u003c\/td\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003ctd\u003e60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImmersion\u003c\/td\u003e\n\u003ctd\u003e48 hours\u003c\/td\u003e\n\u003ctd\u003e8 hours\u003c\/td\u003e\n\u003ctd\u003e6 hours\u003c\/td\u003e\n\u003ctd\u003e60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Micron_Navigator_TDS.pdf\"\u003e\u003cspan\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003eClick here to download Micron Navigator Technical Data Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"BLACK \/ Qt","offer_id":43098111115398,"sku":"ILX-YBD779Q","price":121.14,"currency_code":"USD","in_stock":true},{"title":"WHITE \/ Qt","offer_id":43098111148166,"sku":"ILX-YBD704Q","price":121.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Interlux_Micron_Navigator_photo__40770.jpg?v=1770151413"},{"product_id":"micron-cf","title":"Interlux Micron CF Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Micron CF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eAntifouling Copper-Free Paint with Econea\u003c\/p\u003e\n\u003cp\u003eMicron® CF features all the fantastic benefits of Micron technology-without copper. Micron CF is your multi season antifouling solution with its Biolux® Slime Blocking Technology to combat slime and Econea™ to ward off barnacles and zebra mussels. Micron CF features self polishing that reduces paint build- up and the self-smoothing paint reduces friction and improves fuel efficiency. Micron CF is available in 4 bright colors including Shell White as well as a crisp black. A high solids formulation, Micron CF offers reduced solvent emissions and is VOC compliant. Safe on all hull materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo sanding or prep work required.\u003c\/li\u003e\n\u003cli\u003eCopper free formula\u003c\/li\u003e\n\u003cli\u003eHaul \u0026amp; Relaunch without repainting\u003c\/li\u003e\n\u003cli\u003eReduced solvent emissions\u003c\/li\u003e\n\u003cli\u003eTouch dry – 1 hour; Dry to overcoat – 2 hours; Dry to launch – 6 hours minimum\u003c\/li\u003e\n\u003cli\u003eVOC compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Micron technology?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicron Technology is the basis of all Micron bottom paints and the formulations are second to none. Micron Technology was first introduced to the industry in the early 80's and has evolved into the class leading antifouling paints. \u003cbr\u003e- Longest lasting, multi-season ability to haul and re-launch without repainting \u003cbr\u003e- Controlled polishing like a bar of soap reduces paint build up, eliminating the need for sanding \u003cbr\u003e- Micron Technology polishes to a smoother surface than hard antifoulings - maximizing fuel savings \u003cbr\u003e- Unlike old fashion high copper bottom paints, Micron uses less copper more efficiently for longest lasting antifouling protection\u003c\/p\u003e\n\u003cp\u003eMicron Technology vs old fashioned hard antifoulings\u003cbr\u003eAfter many years of using old fashioned hard high copper bottom paints, the paint film continues to build up, become brittle, and starts to crack and flake off. Micron Technology antifoulings polish at a controlled rate and therefore will never build up. It is this controlled polishing that enables Micron to be used on all boats, in all waters, and at all times! No paint build up means that you will never have to remove old layers of Micron and spend precious hours or money each time you want to repaint.\u003c\/p\u003e\n\u003cp\u003eMicron Technology and fuel savings\u003cbr\u003eThere's another added benefit to controlled polishing: fuel savings! The roughness caused by old fashioned hard high copper bottom paints creates extra drag on boat bottoms requiring the use of more horsepower. With extra horsepower comes extra fuel consumption, extra fuel consumption means more money at the fuel pump. There is only one way to ensure that the bottom is smooth and that is to choose Micron Technology. Micron Technology antifouling polishes at a controlled rate leaving your bottom smooth - remember the smoother the bottom paint, the lower the resistance; the lower the surface resistance the better the fuel economy.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e------------------------------------------------------------------------------------------------\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003cp class=\"tab_label\"\u003e\u003cstrong\u003e\u003cspan\u003eHow To Apply Micron CF\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION DATA METHOD\u003c\/strong\u003e: Airless Spray, Brush, Conventional Spray, Roller  \u003cem\u003eDO NOT SPRAY\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewithout following proper safety procedures for spray application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDRY FILM THICKNESS PER COAT: \u003c\/strong\u003e2 mils (3 wet mils)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e 518 sq. ft\/gal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION TEMP:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e41°F Min. \/ 95°F Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHINNER:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSpecial Thinner 216\u003c\/p\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Touch\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003ctd\u003eTo Launch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e9 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePREVIOUSLY PAINTED SURFACES:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIn Good Condition with Pacifica or Trilux 33: Sand with 80 grade (grit) paper. Remove sanding residue. TBT Copolymers: If these coatings are more than a year old, wet sand the surface with 80 (grit) grade paper to a clean, firmly attached surface. Remove sanding residue. Apply 1-2 coats of TBT Sealer. Sand surface with 80 grade (grit) paper to a clean firmly attached surface. Remove sanding residue. Non-TBT Copolymers: Apply 1 coat of Primocon. Hard Antifoulings: Sand surface with 80 grade (grit) paper to a clean firmly attached surface. Remove sanding residue. Apply Micron CF. In Poor Condition: Remove antifouling paint in poor condition with Interstrip Semi-Paste 299E. Sand and wipe clean with Fiberglass Solvent Wash 202.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIt is very important that bare fiberglass be properly prepared to completely remove the mold release wax. This will prevent delamination of the antifouling paint. Begin by scrubbing the surface thoroughly with a stiff brush using soap and water to remove loose dirt and contamination. Flush with fresh water to remove the soap residue and allow to dry. Remove mold release wax using one of the following Interlux products, Fiberglass Surface Prep YMA601 or Fiberglass Solvent Wash 202 following the product label instructions. To be certain the contamination has been removed, run water over the surface. If the water beads up or separates, repeat cleaning process. When the water sheets off, all contamination has been removed. After the surface has been properly cleaned, follow one of the application systems below. No Sand System - Apply one thin, continuous coat of Interprotect 2000E or Fiberglass No-Sand Primer. Sanding System - Sand with 80 grade (grit) paper. Remove sanding residue and wipe with Fiberglass Solvent Wash 202.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBARE WOOD:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSand with 80 grade (grit) paper. Remove sanding residue. Apply first coat reduced 10% with Special Thinner 216. Fill seams, if necessary, with Seam Compound Brown 30.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUNDERWATER METAL PARTS:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSandblast or sand with medium grade (grit) emery cloth to a bright metal finish and wipe clean. Apply one coat of Interprotect 2000E that has been thinned 15-20% with Reducing Solvent 2316N. Apply the Interprotect the same day as blasting or sanding. When the Interprotect 2000E is thumbprint tacky apply the first coat of Micron CF. Apply 2-3 coats of Micron CF following the proper dry times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAt least 2 coats should be applied. Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges. Thinning Do not exceed 10% maximum. Airless Spray Pressure: 170-204 bar\/2500-3000 psi. Tip Size: 0.53 mm\/0.021\" Conventional Spray Pressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 10-15 psi (pot pressure). Tip Size: 1.8-2.2 mm\/0.071-0.087\" Other To prevent premature failure, ensure correct amount of paint is applied using the coverage as a guide. Apply to clean, dry, properly prepared surfaces only. Surface must be dry and clean, and free from grease, loose paint etc. Do not apply Micron CF directly to aluminum. All metal surfaces must be primed with Interprotect 2000E\/2001E or Primocon. Do not apply direct to tin-based paint such as Micron® 33, Micron® 44 or Tri-Lux® IIT.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Micron_CF.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Micron_CF.pdf\"\u003eHow to Apply\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/YBD100_Micron_CF_Blue_MSDS.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"42\" height=\"40\"\u003eMSDS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Gal","offer_id":43098111737990,"sku":"ILX-YBD103G","price":371.71,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098111770758,"sku":"ILX-YBD100G","price":371.71,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098111803526,"sku":"ILX-YBD101G","price":371.71,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098111836294,"sku":"ILX-YBD102G","price":371.71,"currency_code":"USD","in_stock":true},{"title":"Shell White \/ Gal","offer_id":43103307169926,"sku":"ILX-YBD104G","price":371.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/MicronCF__55678.jpg?v=1770151315"},{"product_id":"micron-csc","title":"Interlux Micron CSC Antifouling Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003ch1 dir=\"ltr\" class=\"classyunicodedone\"\u003eInterlux Micron CSC Antifouling Bottom Paint\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-4896b11a-7fff-9470-d911-b7b9be33890b\"\u003e\u003cstrong\u003eStay ahead of marine growth with Interlux Micron CSC, a premium self-polishing antifouling paint designed for long-lasting performance.\u003c\/strong\u003e\u003cspan\u003e This Interlux boat paint gradually wears away over time, ensuring a fresh layer of biocide is always exposed for consistent protection. Its multi-season formula is ideal for boats in both saltwater and freshwater, reducing the need for frequent haul-outs. With a smooth, fuel-efficient finish and easy application, Micron CSC is a trusted choice for boaters who want reliable antifouling without the extra work. \u003c\/span\u003e\u003cspan\u003eAvailable in blue, green, red, or gray.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eFeatures\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSuperior Multi-Season Protection \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDesigned for powerboats and sailboats, Micron bottom paint delivers consistent antifouling performance across a wide range of marine environments, providing year-round defense against fouling.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMatte Finish for a Clean Look \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMicron CSC provides a smooth, matte finish, ensuring a sleek appearance while offering maximum protection below the waterline.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSelf-Polishing Ablative Formula \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInterlux Micron CSC gradually wears away as the boat moves, revealing fresh layers of biocide (37.2% Cuprous oxide) to combat marine growth continuously. This means:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eNo unnecessary buildup of old paint layers\u003c\/li\u003e\n\u003cli\u003eMinimal sanding between repaints\u003c\/li\u003e\n\u003cli\u003eLess maintenance and easier touch-ups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIdeal for Haul-Outs and Relaunching\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eUnlike many antifouling coatings, Micron bottom paint remains effective even after haul-outs, making it a smart choice for seasonal storage, trailered boats, and dry-stored vessels.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEasy Application and Fast Drying\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe bottom paint can be applied using a brush, roller, or spray, and it dries quickly for minimal downtime. Its high film-build formula also delivers durability and longevity in every coat.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEnvironmentally Responsible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMicron CSC is a more eco-conscious alternative to traditional bottom paints, with its low solvent emissions and high solids composition.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eAvailable Colors and Pack Sizes\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\" align=\"center\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e \u003ccol width=\"348\"\u003e \u003ccol width=\"114\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eColor\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eCode\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eBlue\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5580\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eGreen\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5581\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eRed\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5582\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eBlack\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5583\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eShark White (may turn green above the waterline)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eY5584\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"center\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e \u003ccol width=\"155\"\u003e \u003ccol width=\"248\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003ePack Sizes\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eAvailability \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e1 US Quart\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eAvailable\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e1 US Gallon\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eAvailable\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e3 US Gallon\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003eGreen, Blue, Red \u0026amp; Black - US Only)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eApplication and Coverage\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eFor optimal performance, apply a minimum of two coats. Areas exposed to higher water friction, such as chines, rudders, stern gear, and leading edges, should receive an additional stripe coat.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMicron CSC bottom paint can be applied using a roller, brush, or spray. Each coat should have a dry film thickness of 2 mils and cover approximately 439.7 square feet per gallon.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor best results, apply in temperatures between 50°F and 90°F. If thinning is needed, use Brush-Ease 433 or Special Thinner 216.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eDrying and Recoat Times \u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e90°F: Dries to touch in 1 hour, ready to recoat or launch in 16 hours.\u003c\/li\u003e\n\u003cli\u003e70°F: Dries to touch in 4 hours, ready to recoat or launch in 16 hours.\u003c\/li\u003e\n\u003cli\u003e50°F: Dries to touch in 4 hours, ready to recoat or launch in 16 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" class=\"classyunicodedone\"\u003eSurface Preparation\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003ePreviously Painted Surfaces\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eIf the existing paint is intact, sand lightly with 80-grit sandpaper to remove dust and loose paint, then clean thoroughly.\u003c\/li\u003e\n\u003cli\u003eIf the paint is peeling or deteriorated, strip away the damaged layers using Interstrip Semi-Paste 299E before repainting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eProper surface preparation is critical to ensure strong adhesion and prevent delamination.\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eClean the surface with soap, water, and a stiff brush, then rinse to remove all residue.\u003c\/li\u003e\n\u003cli\u003eEliminate any mold-release wax using\u003cspan\u003e \u003c\/span\u003eFiberglass Solvent Wash 202\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eFiberglass Surface Prep YMA601V, following manufacturer instructions. \u003c\/li\u003e\n\u003cli\u003eUse Interlux Watertite to repair imperfections and surface flaws as needed.\u003c\/li\u003e\n\u003cli\u003eChoose between two priming options:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eNo-Sand System: Apply Fiberglass No-Sand Primer or\u003cspan\u003e \u003c\/span\u003eInterProtect 2000E\u003cspan\u003e \u003c\/span\u003eas per label instructions.\u003c\/li\u003e\n\u003cli\u003eSanding System: Use 80-grit sandpaper to create a dull, textured surface, then wipe away debris before painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eSmooth the surface with 80-grit sandpaper, then clean away dust with\u003cspan\u003e \u003c\/span\u003eBrush Ease 433.\u003c\/li\u003e\n\u003cli\u003eFor the initial coat, use\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003eSpecial Thinner 216\u003c\/a\u003eto thin the paint by 10%.\u003c\/li\u003e\n\u003cli\u003eIf gaps or seams need sealing, apply Seam Compound Brown 30 as required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eImportant Notes\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eNot suitable for aluminum hulls or fittings.\u003c\/li\u003e\n\u003cli\u003eDo not apply over tin-based copolymer antifouling paints.\u003c\/li\u003e\n\u003cli\u003eColors may fade over time, especially near the waterline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes Interlux Micron CSC antifouling paint work on all hull materials?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMicron CSC is compatible with wood, fiberglass, and properly primed metal surfaces but should not be used on aluminum hulls or fittings due to potential corrosion risks.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan this paint be applied over existing antifouling paint? \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eYes, as long as the previous coating is intact and properly prepped. If the old paint is peeling or is in poor condition, it should be removed before applying Micron CSC.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is the coverage area per gallon of Interlux Micron CSC?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWhen applied correctly, one gallon provides approximately 439.7 square feet of coverage.\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Qt","offer_id":43098113736838,"sku":"ILX-5583Q","price":98.58,"currency_code":"USD","in_stock":true},{"title":"Black \/ Gal","offer_id":43098113769606,"sku":"ILX-5583G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098113802374,"sku":"ILX-5580Q","price":98.58,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098113835142,"sku":"ILX-5580G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"Green \/ Qt","offer_id":43098113867910,"sku":"ILX-5581Q","price":98.58,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098113900678,"sku":"ILX-5581G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098113933446,"sku":"ILX-5582G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"Red \/ Qt","offer_id":43098113966214,"sku":"ILX-5582Q","price":98.58,"currency_code":"USD","in_stock":true},{"title":"White \/ Gal","offer_id":43098113998982,"sku":"ILX-5584G","price":349.26,"currency_code":"USD","in_stock":true},{"title":"White \/ Qt","offer_id":43098114031750,"sku":"ILX-5584Q","price":98.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/MicronCSC__89761.jpg?v=1770151188"},{"product_id":"odyssey-hd","title":"Pettit Odyssey HD Ablative Antifouling Bottom Paint","description":"\u003ch3 class=\"classyunicodedone\"\u003e\n\u003cstrong\u003e$25 Rebate Per Gallon on Pettit Hydrocoat\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e– Valid through May 31 (Limit 2 gallons per customer). \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/pettit-protect-your-adventure-rebate-tear-tab-2026.pdf?v=1772221726\" target=\"_blank\" title=\"Pettit Rebate Form\" rel=\"noopener\"\u003eDownload Rebate Form\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch2 class=\"classyunicodedone\"\u003ePettit Odyssey HD Ablative Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit Odyssey HD Bottom Paint is a multi-season antifouling paint that combines controlled polishing ablative technology with a high copper content. Odyssey HD provides a paint film strong enough to handle tough fouling waters from coast to coast. This bottom paint is 50 state VOC-compliant and will not build up over time, leaving running surfaces smooth and clean. Odyssey HD's copolymer resins withstand hauling and relaunching without losing effectiveness for both power and sailboats. Additionally, Odyssey is fast-drying and provides multi-season protection.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pettt-hull-defense.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettt-hull-defense.jpg\" alt=\"pettt-hull-defense.jpg\" width=\"116\" height=\"130\"\u003e\u003c\/p\u003e\n\u003cp\u003e Pettit Odyssey HD provides excellent antifouling protection and is backed by the industry's strongest limited warranty. The Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Odyssey HD offers the most dependable and trusted antifouling paint in the industry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-season protection\u003c\/li\u003e\n\u003cli\u003eFast dry, VOC-compliant for boatyards\u003c\/li\u003e\n\u003cli\u003eHigh-copper ablative protection in all waters\u003c\/li\u003e\n\u003cli\u003eSmooth polishing finish prevents buildup and sanding\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eCovered by HD (Hull Defense) 18 month limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: 1 US Gallon, 1 US Quart\u003c\/li\u003e\n\u003cli\u003eType: Copper-based ablative\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: 1207 Blue, 1807 Black, 1227 Dark Blue, 1307 Green, 1607 Red\u003c\/li\u003e\n\u003cli\u003eDrying Time: To overcoat 3hrs; To launch; 10hrs. @ 70°F\u003c\/li\u003e\n\u003cli\u003eNumber of Coats Recommended: 2\u003c\/li\u003e\n\u003cli\u003eCoverage: 475 ft2\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 330 grams\/liter\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 45.7%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\" target=\"_blank\"\u003ePettit Protect Epoxy Primer\u003c\/a\u003e - Primer for bare fiberglass applications\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003ePettit 120 Thinner \u003c\/a\u003e- For surface prep\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Odyssey HD Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Odyssey paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Odyssey Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Odyssey Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Odyssey HD provides. (475 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Odyssey HD has a coverage of 475 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Odyssey HD Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eOdyssey HD is easily applied by brush, roller, or spray. When rolling, use only a high-quality roller cover. Prior to application, it is necessary to thoroughly mix the paint before using. Odyssey HD contains cuprous oxide, so there is a tendency for settling to occur. Shake the can of paint on a mechanical paint shaker, a wooden paddle, or an electric drill mixer. Before using, check the sides and bottom of can to ensure all the pigment has been mixed in. Adhere to all application instructions to obtain optimum performance. If spraying, make sure not to thin more than 10% or inadequate paint film thickness will occur.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness: \u003c\/strong\u003e1.6 mils (3.2 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 475 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e 50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003e120 Brushing Thinner or 121 Spraying Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  1\/4 HR\u003c\/td\u003e\n\u003ctd\u003e  1-1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  3 HR\u003c\/td\u003e\n\u003ctd\u003e  10 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  1 HR\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTo paint old hard and ablative bottom paints, thoroughly wipe down the surface with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eSand painted surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eFor old tin or copper copolymers or Teflon-based bottom pants, sand thoroughly with 80 grit sandpaper to remove outer surface.\u003c\/li\u003e\n\u003cli\u003eWipe clean and apply two coats of Odyssey HD.\u003c\/li\u003e\n\u003cli\u003eSoft, sloughing paint should be removed prior to applying Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or dewaxed several times with D-95 Dewaxer. Then proceed with one of the systems below:\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand hull thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cem\u003eNon-Sanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, dewax surface with 92 Bio-Blue Surface Prep using a course nylon scuff pad.\u003c\/li\u003e\n\u003cli\u003eRinse all residue from surface and let dry.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Pettit Protect Epoxy Primer 4700\/4701 following primer label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarrier Coat\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrepare the fiberglass surface as mentioned above (sanding method).\u003c\/li\u003e\n\u003cli\u003eApply two - three coats of Pettit Protect Epoxy Primer per label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 6627 Tie-Coat Primer thinned 25% with 97 Epoxy Thinner directly to bare wood.\u003c\/li\u003e\n\u003cli\u003eAllow drying for 4 hours then apply two un-thinned coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly sand existing hard antifouling paint\u003c\/li\u003e\n\u003cli\u003eIf priming is necessary on bare wood spots, apply a touch-up coat of 6627 Tie-Coat Primer thinned 25% with Epoxy thinner.\u003c\/li\u003e\n\u003cli\u003eApply coats of Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt.\u003c\/li\u003e\n\u003cli\u003eRemove loose rust and scale from the metal surface by scraping or sandblasting.\u003c\/li\u003e\n\u003cli\u003eBlow off residue then apply one or two coats of Pettit 6980 Rustlok Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with two coats of Pettit 4700\/4701 Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with Odyssey HD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not use Pettit Odyssey HD on aluminum hulls and outdrives.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-Odyssey-HD-Application-Instructions.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"64\" height=\"62\"\u003e\u003cstrong\u003eClick to Download Pettit Odyssey HD Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098115178630,"sku":"PET-1807G","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098115211398,"sku":"PET-1207G","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Dark Blue \/ Gal","offer_id":43103255396486,"sku":"PET-1227G","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43103291965574,"sku":"PET-1307G","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43103291998342,"sku":"PET-1607G","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/PET-1207G__17580.jpg?v=1770171811"},{"product_id":"odyssey-60","title":"Pettit Odyssey 60 Ablative Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Odyssey 60 Multi-Season Ablative Boat Bottom Paint\u003c\/h2\u003e\n\u003cp\u003ePettit Odyssey 60 is a high-copper, multi-season ablative bottom paint. This ablative paint delivers exceptional multi-season performance against fouling by offering the highest copper content available in an ablative paint. With significantly more copper than competitors, Odyssey 60 offers stronger protection at a better value. It provides protection in all water types and is compatible over most bottom paints.\u003c\/p\u003e\n\u003cp\u003ePettit Odyssey 60 features fast dry technology, providing quick turnaround and increased production for all applicators. Unique controlled erosion technology minimizes coating build-up while keeping underwater surfaces smooth. Its ablative surface wears away with use, providing a continuous supply of fresh biocides while eliminating the need for sanding. Odyssey 60 can be hauled and re-launched without repainting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pettt-hull-defense.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettt-hull-defense.jpg\" alt=\"pettt-hull-defense.jpg\" width=\"116\" height=\"130\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e Pettit Odyssey 60 provides excellent antifouling protection and is backed by the industry's strongest limited warranty. The Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Odyssey 60 offers the most dependable and trusted antifouling paint in the industry.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast dry, VOC compliant standard for boatyards\u003c\/li\u003e\n\u003cli\u003eHigh-copper (65%) ablative protection in all waters\u003c\/li\u003e\n\u003cli\u003eSmooth polishing finish prevents buildup and sanding\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eCovered by HD (Hull Defense) 18 Month Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack Size: 1 US Gallon\u003c\/li\u003e\n\u003cli\u003eType: Copper-based ablative\u003c\/li\u003e\n\u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e\n\u003cli\u003eColors Available: 1265 Blue, 1365 Green, 1665 Red, 1865 Black\u003c\/li\u003e\n\u003cli\u003eNumber of Coats Recommended: 2 minimum\u003c\/li\u003e\n\u003cli\u003eCoverage: 440 ft2\/gal\u003c\/li\u003e\n\u003cli\u003eVOC: 370 grams\/liter\u003c\/li\u003e\n\u003cli\u003eBiocide: Cuprous Oxide 65%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\" target=\"_blank\"\u003ePettit Protect Epoxy Primer\u003c\/a\u003e - Primer for bare fiberglass applications\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003ePettit 120 Thinner \u003c\/a\u003e- For surface prep\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Odyssey 60 Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Odyssey 60 paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Odyssey 60 Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Odyssey 60 Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Odyssey 60 provides. (440 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Odyssey 60 has a coverage of 440 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Odyssey 60 Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eOdyssey 60 is heavily loaded with cuprous oxide. As a result, there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. Adhere to all application instructions, precautions, conditions, and limitations to obtain optimum performance.\u003c\/p\u003e\n\u003cp\u003eWhen spraying, do not thin Odyssey 60 more than 10% (12 ounces per gallon) or inadequate paint film thickness will occur. When applying by roller, use a short nap (3\/8\" maximum) roller cover.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2 minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness: \u003c\/strong\u003e2 mils (3.6 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 440 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e 50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003e120 Brushing Thinner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e  Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e  To Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  90°F\u003c\/td\u003e\n\u003ctd\u003e  1\/4 HR\u003c\/td\u003e\n\u003ctd\u003e  3 HR\u003c\/td\u003e\n\u003ctd\u003e  8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  70°F\u003c\/td\u003e\n\u003ctd\u003e  1\/2 HR\u003c\/td\u003e\n\u003ctd\u003e  6 HR\u003c\/td\u003e\n\u003ctd\u003e  16 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  50°F\u003c\/td\u003e\n\u003ctd\u003e  1 HR\u003c\/td\u003e\n\u003ctd\u003e  12 HR\u003c\/td\u003e\n\u003ctd\u003e  24 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is in good condition, thoroughly sand with 80 grit paper then solvent clean with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two finish coats of Odyssey 60.\u003c\/li\u003e\n\u003cli\u003eIf previous coating is soft or in poor condition, remove to the bare surface by sanding or using EZ Speed Strip 125.\u003c\/li\u003e\n\u003cli\u003eProceed with appropriate bare system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or dewaxed several times with D-95 Dewaxer. Then proceed with one of the systems below:\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand hull thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash with 120 Brushing Thinner.\u003c\/li\u003e\n\u003cli\u003eApply two or three thin coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cem\u003eNon-Sanding Method:\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean, dewax surface with 92 Bio-Blue Surface Prep using a course nylon scuff pad.\u003c\/li\u003e\n\u003cli\u003eRinse all residue from surface and let dry.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Pettit Protect Epoxy Primer 4700\/4701 following primer label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two or three thin coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBarrier Coat\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrepare the fiberglass surface as mentioned above (sanding method).\u003c\/li\u003e\n\u003cli\u003eApply two - three coats of Pettit Protect Epoxy Primer per label instructions.\u003c\/li\u003e\n\u003cli\u003eApply two or three thin coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand thoroughly with 80 grit sandpaper and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply a coat of 6627 Tie-Coat Primer thinned 25% with 97 Epoxy Thinner directly to bare wood.\u003c\/li\u003e\n\u003cli\u003eAllow drying for 4 hours then apply two un-thinned coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly sand existing hard antifouling paint\u003c\/li\u003e\n\u003cli\u003eIf priming is necessary on bare wood spots, apply a touch-up coat of 6627 Tie-Coat Primer thinned 25% with Epoxy thinner.\u003c\/li\u003e\n\u003cli\u003eApply coats of Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt.\u003c\/li\u003e\n\u003cli\u003eRemove loose rust and scale from the metal surface by scraping or sandblasting.\u003c\/li\u003e\n\u003cli\u003eBlow off residue then apply one or two coats of Pettit 6980 Rustlok Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with two coats of Pettit 4700\/4701 Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with Odyssey 60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDo not use Pettit Odyssey 60 on aluminum hulls and outdrives.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-Odyssey-60-Bottom-Paint-Application-Instructions.pdf\" target=\"_blank\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"64\" height=\"62\"\u003e\u003cstrong\u003eClick to Download Pettit Odyssey 60 Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098115571846,"sku":"PET-1865G","price":411.06,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098115604614,"sku":"PET-1265G","price":411.06,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098115637382,"sku":"PET-1665G","price":411.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Odyssey_60_Ablative_Bottom_Paint___64159.jpg?v=1770171454"},{"product_id":"odyssey-triton","title":"Pettit Odyssey Triton Ablative Antifouling Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Odyssey Triton Ablative Antifouling Paint\u003c\/h2\u003e\n\u003cp\u003eThe Pettit Odyssey Triton Ablative Antifouling Paint delivers exceptional tri-biocide multi season performance. Combining the reliability of Copper Thiocyanate, versatile organic boosting biocide Zinc Pyrithione, and the impressive strength of ECONEA. The ingredient combination Makes Odyssey Triton effective against all types of fouling found in even the harshest marine environments. Pettit is introducing a whole new level of performance while preventing build up and keeping underwater surfaces smooth.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pettt-hull-defense.jpg\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettt-hull-defense.jpg\" alt=\"pettt-hull-defense.jpg\" width=\"116\" height=\"130\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePettit Odyssey HD provides excellent antifouling protection and is backed by the industry's strongest limited warranty. The Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Odyssey HD offers the most dependable and trusted antifouling paint in the industry.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThree biocides provide unparalleled multi-season protection in the harshest environments\u003c\/li\u003e\n\u003cli\u003eMaximum fuel efficiency and reduced build-up\u003c\/li\u003e\n\u003cli\u003eMaximum protection against all types of marine growth\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eCovered by the enhanced HD (Hull Defense) 24 Month Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFlat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e400 ft²\/gallon @ 2 mils thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 minimum per season\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSold in Gallons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1299G Blue , 1899G Black, 1399G Green, 1699G Red, 1199G White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Odyssey Triton Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Odyssey Triton paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Odyssey Triton Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Odyssey Triton Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Odyssey Triton provides. (450 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Odyssey Triton has a coverage of 450 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Odyssey Triton Bottom Paint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Data Method:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush, Roller, or Airless or Conventional Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness Per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 Mils dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e400 sq²\/gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e50° F Min \/ 90°F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePettit 120 Brushing Thinner. Do not thin more than 10% (12 ounces per Gallon)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Times:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eMinimum recoat time is 4 hours @ 70°F. Minimum time between final coat and launching is 16 hours. Under cold or damp conditions increase dry times by 50%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit-Odyssey-Triton-Application\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/odyssey-triton-application.jpg\" alt=\"Pettit-Odyssey-Triton-Application\" width=\"600\" height=\"339\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the previous coating is in good condition thoroughly sand with 80-grit sandpaper, then clean with the 120 Brushing Thinner solvent to remove residue. Apply two finish coats of the Odyssey Triton.\u003c\/li\u003e\n\u003cli\u003eIf the previous coating is soft or in poor condition remove to the bare surface by sanding or using a paint or varnish remover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer or 120 Brushing Thinner. Sand thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash the sanded surface with 185 Ablative Thinner or 120 Brushing Thinner to remove sanding residue. Then apply two or three coats of the Odyssey Triton following application instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo eliminate the sanding operation, prep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit 95 Dewaxer only. Then apply one thin coat of Pettit 6998 Skip-Sand Primer or 6999 Sandless Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three coats of Odyssey Triton.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Aluminum:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAbrade the surface to clean, bright metal by sanding, wire-brushing, or sandblasting. Blow off or vacuum sanding residue so that surface is clean and dry.\u003c\/li\u003e\n\u003cli\u003eThen immediately apply two coats of Pettit Aluma Protect 4400\/4401 Aluminum Epoxy Primer. Let dry for two hours and then apply two coats of Pettit Protect Epoxy Primer 4700\/4701 while following instructions.\u003c\/li\u003e\n\u003cli\u003eAfter the second coat of Pettit Protect wait 5-8 hours (no more or less) and apply the first coat of Odyssey Triton. Follow up with one or two additional coats of Odyssey Triton.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUnderwater Metal Parts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply Pettit Protect 4700\/4701. Follow surface preparation instructions and priming underwater metal running gear specification via Pettit Protect label or product data sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098117374086,"sku":"PET-1899G","price":479.36,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098117406854,"sku":"PET-1699G","price":479.36,"currency_code":"USD","in_stock":true},{"title":"White \/ Gal","offer_id":43098117439622,"sku":"PET-1199G","price":479.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Odyssey-Triton__98648.jpg?v=1770171321"},{"product_id":"pacifica-plus-w-biolux","title":"Interlux Pacifica Plus Antifouling Marine Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Pacifica Plus Antifouling Marine Paint with Biolux\u003c\/h2\u003e\n\u003cp\u003eInterlux Pacifica antifouling paint is specially designed to battle slime and contains Econea to help ward off barnacles, algae, and other underwater organisms. It is formulated with a dual biocide antifouling that uses Biolux Slime Blocking technology.\u003c\/p\u003e\n\u003cp\u003eInterlux Pacifica is easy to apply with a roller or brush. The overall performance and protection provided by Interlux Pacifica are directly related to the amount of antifouling paint applied. A thin layer may lead to premature fouling. A thicker layer will protect your boat much longer.  Interlux Pacifica is safe to use for both fresh and saltwater applications and is safe for all boats including aluminum, wood, fiberglass, and steel.\u003c\/p\u003e\n\u003cp\u003eInterlux Pacifica uses Econea technology, which is a copper-replacement technology. It allows antifouling performance to work at very low concentrations.  It is safer for use on aluminum, unlike its Copper Oxide counterparts. Once emitted from paint film, it breaks down quickly. It is formulated to protect against more severe organisms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCopper-free bottom paint\u003c\/li\u003e\n\u003cli\u003eContains Econea™ to control shell growth and Biolux® Slime-Blocking technology\u003c\/li\u003e\n\u003cli\u003eClean, crisp, bright colors\u003c\/li\u003e\n\u003cli\u003eHigh solids, reduced solvent emissions\u003c\/li\u003e\n\u003cli\u003eFast dry, low odor\u003c\/li\u003e\n\u003cli\u003ePolishing action for improved fuel efficiencies, which equals reduced Carbon Dioxide and Sulfur Dioxide into the air\u003c\/li\u003e\n\u003cli\u003eSuitable for all substrates, including aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLow Sheen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Area:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBelow the waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e330 g\/lt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Size: \u003c\/strong\u003e1 US Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYBB260-Blue, YBB262-Red, YBB263-Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/interlux-special-marine-paint-thinner-brush-or-spray.html\"\u003e\u003cstrong\u003eInterlux Special Thinner:\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eFor thinning - do not exceed 10% per volume\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow To Apply Interlux Pacifica Plus\u003c\/h2\u003e\n\u003cp\u003eInterlux Pacifica Plus is suitable for use on all boats including fiberglass, aluminum, wood, and steel. This antifouling paint can be applied by airless spray, brush, conventional spray, or roller. Only apply Pacifica Plus to clean, dry, and properly prepared surfaces only. All metal surfaces must be primed before applying Pacifica Plus.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Airless Spray, Brush, Conventional Spray, Roller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDry Film Thickness per Coat: \u003c\/strong\u003e2 mils (3 mils wet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 528 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e41°F Min. \/ 95°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSpecial Thinner 216\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e4 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e9 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePREVIOUSLY PAINTED SURFACES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIn Good Condition with Pacifica or Trilux 33\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 (grit) grade paper. Wipe with Special Thinner 216.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf these coatings are more than a year old, wet sand the surface with 80 (grit) grade paper to a clean, firmly attached surface. Wipe down with Special Thinner 216.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eApply 1-2 coats of TBT Sealer.\u003c\/li\u003e\n\u003cli\u003eNon-TBT Copolymers: Apply 1 coat of Primocon.\u003c\/li\u003e\n\u003cli\u003eHard Antifoulings: Sand surface with 80 grade (grit) paper to a clean firmly attached surface, wipe with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eApply Pacifica Plus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eIn Poor Condition\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove antifouling paint in poor condition with Interstrip Semi-Paste 299E.\u003c\/li\u003e\n\u003cli\u003eSand and wipe clean with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBARE FIBERGLASS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by scrubbing the surface thoroughly with a stiff brush using soap and water to remove loose dirt and contamination. Flush with fresh water to remove the soap residue.\u003c\/li\u003e\n\u003cli\u003eRemove mold release wax using one of the following methods:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eApply Fiberglass Surface Prep YMA601 or Low VOC Fiberglass Solvent Wash 202V with a maroon, 3M Scotch-Brite®  pad and scrub well.\u003c\/li\u003e\n\u003cli\u003eFlush with fresh water or wipe off with a clean, wet cloth ensuring that no traces of Fiberglass Surface Prep or Low VOC Fiberglass Solvent Wash remain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eAn alternate method would be to dampen cheesecloth with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWipe thoroughly to remove all surface contamination and cleaners. Wipe off with a clean, dry rag before liquid dries.\u003c\/li\u003e\n\u003cli\u003eWipe only a few square feet at a time and change rags frequently.\u003c\/li\u003e\n\u003cli\u003eTo be certain the contamination has been removed, run water over the surface. If the water beads up or separates, repeat one of the above methods.\u003c\/li\u003e\n\u003cli\u003eWhen the water sheets off, all contamination has been removed.\u003c\/li\u003e\n\u003cli\u003eRepair all scratches, nicks and dings by sanding those areas with 80 grade (grit) paper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRemove sanding residue with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cli\u003eFill the repair areas with Interlux® Watertite Epoxy filler.\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eNo Sand System\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface as above. Apply one coat of Interlux Interprotect 2000E.\u003c\/li\u003e\n\u003cli\u003eWhen the Interprotect 2000E is thumbprint tacky apply the first coat of Pacifica Plus.\u003c\/li\u003e\n\u003cli\u003eApply the second coat of Pacifica Plus allowing the appropriate dry times between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSanding System\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface as above. Sand entire gel coat well with 80-grit sandpaper until a flat, matte finish is obtained.\u003c\/li\u003e\n\u003cli\u003eWipe surface clean. Repair imperfections with Interlux® Watertite (YAV135). Sand and wipe clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBARE WOOD:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grade (grit) paper. Clean with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eApply first coat reduced 10% with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Seam Compound Brown 30.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEL HULLS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContact the Interlux Technical Service Department at 1-800-468-7589 for full information.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBARE ALUMINUM:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast or sand with medium grade (grit) emery cloth to a bright metal finish and wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Interprotect 2000E that has been thinned 15-20% with Reducing Solvent 2316N.\u003c\/li\u003e\n\u003cli\u003eApply the Interprotect the same day as blasting or sanding. FACTORY FINISHED ALUMINUM Prime with Primocon.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION INFORMATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAt least 2 coats should be applied. Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges.\u003c\/li\u003e\n\u003cli\u003eApply to clean, dry, properly prepared surfaces only. Surface must be dry and clean, and free from grease, loose paint etc.\u003c\/li\u003e\n\u003cli\u003eDo not apply Pacifica Plus directly to aluminum. All metal surfaces must be primed with Interprotect 2000E\/2001E or Primocon.\u003c\/li\u003e\n\u003cli\u003eDo not apply direct to tin-based paint such as Micron® 33, Micron® 44 or Tri-Lux® IIT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003eAirless Spray\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003ePressure: 170-204 bar\/2500-3000 psi. Tip Size: 0.53 mm\/0.021\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003eConventional Spray\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003ePressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 10-15 psi (pot pressure). Tip Size: 1.8-2.2 mm\/0.071-0.087\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eDo not exceed 10% maximum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/YBB260_Pacifica_Plus_Blue_MSDS.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"48\" height=\"46\"\u003e\u003cspan\u003e\u003cstrong\u003eClick Here to Download Interlux Pacifica Plus MSDS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pacifica_Plus_Technical_Datasheet.pdf\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"48\" height=\"46\"\u003eClick here to Download Interlux Pacifica Plus Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Gal","offer_id":43098117963910,"sku":"ILX-YBB-263G","price":283.12,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098117996678,"sku":"ILX-YBB-260G","price":283.12,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43103292784774,"sku":"ILX-YBB-262G","price":283.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/PacificaPlus__99515.jpg?v=1770170998"},{"product_id":"premium-hrt-1","title":"Pettit HRT Premium Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003ePettit Premium HRT Multi-Season Antifouling Boat Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eDiscover the superior protection of Pettit HRT Premium Bottom Paint, crafted to deliver advanced antifouling performance. This high-quality paint provides exceptional coverage and long-lasting defense against all types of marine growth. Pettit HRT premium reviews consistently praise its durability and effectiveness, making it a top choice among boaters seeking reliable hull protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHRT: Hybrid Reactive Technology\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efeatures high density biocide utilization to maximize effectiveness, along with film modifiers to reduce yearly build-up, maintain color consistency, and lower weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in gallons\u003c\/li\u003e\n\u003cli\u003eMulti-Season protection\u003c\/li\u003e\n\u003cli\u003eHigh-copper hybrid protection\u003c\/li\u003e\n\u003cli\u003eSmooth durable polishing finish\u003c\/li\u003e\n\u003cli\u003eSuperior coverage over most bottom paints\u003c\/li\u003e\n\u003cli\u003eEqually effective on both power and sail boats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1219 Blue, 1319 Green, 1619 Red, 1819 Black\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr width=\"100%\" size=\"2\" align=\"center\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow Much Pettit HRT Premium Do I Need for My Boat?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"141\" width=\"600\" alt=\"Pettit Premium HRT Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" title=\"Pettit Premium HRT Application Chart\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Odyssey HD provides. (500 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cdiv align=\"center\"\u003e\u003chr width=\"100%\" size=\"2\" align=\"center\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"classyunicodedone\"\u003e\u003cstrong\u003eHow to Apply Pettit HRT Premium Bottom Paint\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePettit HRT Premium is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 5-10% using\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/truewindmarine.com\/products\/special-thinner\" target=\"_blank\" rel=\"noopener\"\u003e120 Brushing Thinner\u003c\/a\u003e. Pettit HRT Premium has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFlat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e500 ft2\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 minimum per season with additional coat at waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.75 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.5 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003ca href=\"https:\/\/truewindmarine.com\/products\/special-thinner\" target=\"_blank\" title=\"Pettit Special Thinner\" rel=\"noopener\"\u003e120 Brushing Thinner\u003c\/a\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Do not apply Pettit HRT Premium on aluminum hulls or outdrives**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor old hard and ablative bottom paints, begin by thoroughly wiping down the surface with 120 Brushing Thinner. Pay extra attention to waterline areas. Then sand the painted surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eOld tin or copper copolymers, or Teflon-based antifouling paints should be sanded thoroughly with 80 grit sandpaper to remove the chalky outer surface. Wipe clean, then apply one coat of Pettit HRT Premium.\u003c\/li\u003e\n\u003cli\u003eSoft, sloughing antifouling paints should be removed before applying Premium HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with\u003cspan\u003e \u003c\/span\u003e92 Bio-Blue Hull Surface Prep\u003cspan\u003e \u003c\/span\u003eor de-waxed several times with\u003cspan\u003e \u003c\/span\u003ePettit D-95 Dewaxer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Sanding Method (1):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePrep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit D95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip- Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of Premium HRT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Sanding Method (2):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThoroughly clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a coarse Scotch-Brite pad in a swirling motion. Thoroughly rinse all residue from the surface and let dry. Then apply one coat of\u003cspan\u003e \u003c\/span\u003ePettit-Protect High Build Epoxy Primer. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of Pettit HRT Premium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBare wooden hulls should be sanded thoroughly with 80 grit sandpaper and wiped clean of sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of\u003cspan\u003e \u003c\/span\u003e6627 Tie-Coat Primer\u003cspan\u003e \u003c\/span\u003ethinned 25% with\u003cspan\u003e \u003c\/span\u003e97 Epoxy Thinner\u003cspan\u003e \u003c\/span\u003edirectly to the bare wood. Allow 4 hours to dry.\u003c\/li\u003e\n\u003cli\u003eApply two un-thinned coats of Pettit HRT Premium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease and dirt; remove loose rust and scale from the metal surface.\u003c\/li\u003e\n\u003cli\u003eScrape, sandblast or wire brush to 2-3 mil profile. Blow off residue.\u003c\/li\u003e\n\u003cli\u003eApply one or two coats of\u003cspan\u003e \u003c\/span\u003ePettit 6980 Rustlok Primer\u003cspan\u003e \u003c\/span\u003efollowed by two coats of\u003cspan\u003e \u003c\/span\u003ePettit 4700\/4701 High Build Epoxy Primer.\u003c\/li\u003e\n\u003cli\u003eFollow with Pettit HRT Premium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUnderwater Metal Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent clean then abrade to clean bright metal by sanding with 60-80 grit sandpaper, sandblasting or wire brushing.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of\u003cspan\u003e \u003c\/span\u003eProp Coat Barnacle Barrier 1792.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin coats of Pettit HRT Premium bottom paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit-Premium-HRT-Antifouling-Paint-Application-Instructions.pdf?v=1770928164\" title=\"Pettit Premium HRT Antifouling Paint Application Instructions\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg height=\"55\" width=\"57\" alt=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" title=\"pdficon.png\" class=\"__mce_add_custom__\"\u003e\u003cstrong\u003eClick to Download Pettit HRT Premium Antifouling Paint Application Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg class=\"warningImg\" alt=\"warning sign\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"productWarning\" href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098111508614,"sku":"PET-1819G","price":188.43,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098111541382,"sku":"PET-1319G","price":188.43,"currency_code":"USD","in_stock":false},{"title":"Red \/ Gal","offer_id":43098111574150,"sku":"PET-1619G","price":188.43,"currency_code":"USD","in_stock":false},{"title":"Blue \/ Gal","offer_id":43103304319110,"sku":"PET-1219G","price":188.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Pettit_Premium_HRT_Bottom_Paint__47671.jpg?v=1770170659"},{"product_id":"sea-hawk-biocop-tf","title":"Sea Hawk Biocop TF Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk Biocop TF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk's Biocop TF Bottom Paint is a multi-season, self-polishing antifouling paint that provides maximum fouling protection. Bicop TF was developed as an alternative to tin-based antifouling paints to stand up to the harshest marine environments. The new Dual biocide technology and groundbreaking polymer binder system, PL3, produces a biocide that leaves no harmful effects on the environment. Safe for salt or fresh water on boats of all sizes, Biocop TF is a top performer among bottom paints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerforms in fresh or saltwater\u003c\/li\u003e\n\u003cli\u003eMulti-Season performance\u003c\/li\u003e\n\u003cli\u003eAdvanced dual-biocide PL3 release technology\u003c\/li\u003e\n\u003cli\u003eHarder self polishing boosted ablative antifoulant for longer life\u003c\/li\u003e\n\u003cli\u003eApproved for vessels of all sizes\u003c\/li\u003e\n\u003cli\u003eLloyd's Register certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Sea Hawk Biocop TF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk Biocop TF Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using water. Biocop TF has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e:  320 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Brush, Roller, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness\u003c\/strong\u003e: 3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness\u003c\/strong\u003e: 5.0 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness\u003c\/strong\u003e: 2.2 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp\u003c\/strong\u003e: 50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner\u003c\/strong\u003e: If necessary, maximum 10% with Sea Hawk 2033, 2035\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSurface Preparation and Application\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKnown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply minimum 2 coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eUnknown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003ePoor condition of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/li\u003e\n\u003cli\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Sanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of contaminants.\u003c\/li\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Biocop TF. Apply first coat thinned 20% and let dry overnight.\u003c\/li\u003e\n\u003cli\u003eApply two more coats allowing 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel\/Aluminum Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Based Antifoulant Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.\u003c\/li\u003e\n\u003cli\u003eSeal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF, allow 3-6 hours between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper-Free Antifouling Application for Aluminum Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish. \u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Biocop TF, allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Sea Hawk Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"41\" height=\"40\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Mission_Bay_App_Guide.pdf?v=1771443386\" target=\"_blank\"\u003eClick Here to Download Sea Hawk Biocop TF Application Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea-Hawk-Paint-Compatibility-Chart.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"41\" height=\"40\"\u003e\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea-Hawk-Paint-Compatibility-Chart.pdf?v=1771443246\" target=\"_blank\"\u003eClick Here to Download Sea Hawk Bottom Paint Compatibility Char\u003c\/a\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea-Hawk-Paint-Compatibility-Chart.pdf\"\u003et\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098115244166,"sku":"S-H-1205-1GL","price":366.71,"currency_code":"USD","in_stock":true},{"title":"Light Blue \/ Gal","offer_id":43098115276934,"sku":"S-H-1202-1GL","price":366.71,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098115309702,"sku":"S-H-1201-1GL","price":366.71,"currency_code":"USD","in_stock":true},{"title":"Teal \/ Gal","offer_id":43098115342470,"sku":"S-H-1235-1GL","price":366.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Biocop_TF__17374.jpg?v=1770148847"},{"product_id":"sea-hawk-cukote","title":"Sea Hawk Cukote Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk Cukote Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk's Cukote Bottom Paint is a self-polishing ablative paint that provides multi-season protection. Cukote Bottom Paint has a high load of cuprous oxide that makes this formula a top performer even in the most severe fouling areas. Due to its ablative and self-polishing nature, there is no buildup of bottom paint over time. The underwater surface of your hull remains clean and smooth, making this an ideal bottom paint for fast moving vessels. The copolymer in Cukote can withstand removal from water without affecting its antifouling properties. Sea Hawk's Cukote is the premium self-polishing antifouling paint that has established the standard in the industry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-Hard, self-polishing ablative finish\u003c\/li\u003e\n\u003cli\u003eMulti-season performance\u003c\/li\u003e\n\u003cli\u003eRemoving boat from water does not affect antifouling properties\u003c\/li\u003e\n\u003cli\u003eEffective below the waterline on fiberglass, steel, and wood vessels\u003c\/li\u003e\n\u003cli\u003eNo TBT (organotin compounds)\u003c\/li\u003e\n\u003cli\u003e47.5% Cuprous oxide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish: \u003c\/strong\u003eSemi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Content: \u003c\/strong\u003e47.57%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC: \u003c\/strong\u003e398 grams\/liter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e346 sq. ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available: \u003c\/strong\u003e3445-Black, 3441-Red, 3442-Blue, 3434-Teal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size: \u003c\/strong\u003e1 US Gallon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Sea Hawk Cukote Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk Cukote Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using water. Cukote has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSemi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e  320 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBursh, Rolling, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5.0 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.2 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMaximum 10% Sea Hawk 2031 Reducer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellspacing=\"3\" cellpadding=\"3\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDrying Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e  \u003cstrong\u003eSubstrate Temp.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e  \u003cstrong\u003eTouch Dry\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMinimum Overcoat Time\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMinimum Launch Time\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  73°F\u003c\/td\u003e\n\u003ctd\u003e  2 hours\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e  95°F\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  1 hour\u003c\/td\u003e\n\u003ctd\u003e  12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSurface Preparation and Application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKnown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply minimum 2 coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eUnknown Compatibility of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003ePoor condition of existing antifoulant\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/li\u003e\n\u003cli\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSanding Method:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNon-Sanding Method:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of contaminants.\u003c\/li\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Cukote. Apply first coat thinned 20% and let dry overnight.\u003c\/li\u003e\n\u003cli\u003eApply two more coats allowing 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel\/Aluminum Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Based Antifoulant Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.\u003c\/li\u003e\n\u003cli\u003eSeal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote, allow 3-6 hours between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper-Free Antifouling Application for Aluminum Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish. \u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Cukote, allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Sea Hawk Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea_Hawk_Mission_Bay_App_Guide.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"39\" height=\"38\"\u003eClick here to download Sea Hawk Cukote Bottom Paint Application Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea-Hawk-Paint-Compatibility-Chart.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"39\" height=\"38\"\u003eClick here to download Sea Hawk Bottom Paint Compatibility Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098115670150,"sku":"S-H-3445GL","price":274.5,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098115702918,"sku":"S-H-3442GL","price":274.5,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098115735686,"sku":"S-H-3441GL","price":274.5,"currency_code":"USD","in_stock":true},{"title":"Teal \/ Gal","offer_id":43098115768454,"sku":"S-H-3434GL","price":274.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Cukote_Bottom_Paint__95319.jpg?v=1770148773"},{"product_id":"sea-hawk-islands-44-tf","title":"Sea Hawk Islands 44 TF Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eSea Hawk Islands 44 TF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eThe Sea Hawk Islands 44 TF is an advanced tin-free, self-polishing antifouling bottom paint that keeps your hull bottom free of organic growth over multiple cruising seasons. Suitable for both sailing and motor yachts, Islands 44 TF dries to a glossy sheen which helps reduce drag yielding improved speed with less fuel consumption. This dual-biocide antifouling paint utilizes a high purity Cuprous Oxide combined with pharmaceutical-grade Econea to protect your hull against both hard and soft growth. The controlled release formulation ensures biocides are dispersed at a precise rate independent of water types. Islands 44 TF has high volume solids, maximizing surface coverage to yield reduced paint usage.\u003c\/p\u003e\n\u003cp\u003eSea Hawk Islands 44 TF's low VOC formulation complies with rigid limits set by the California Air Quality Management Board and offers a slim-resistant yacht finish with California-compliant VOC emissions and low copper leach rate. This paint provides boaters with a high-performance antifouling that is compatible with virtually every solvent-based bottom paint, including those containing tin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGloss finish\u003c\/li\u003e\n\u003cli\u003eTin-Free multi season performance\u003c\/li\u003e\n\u003cli\u003eEffective in fresh, brackish, and salt waters\u003c\/li\u003e\n\u003cli\u003ePremium quality raw materials and biocides\u003c\/li\u003e\n\u003cli\u003eEconea Biocide Fights both Hard and Soft growth\u003c\/li\u003e\n\u003cli\u003eHighest grade of cuprous oxide available to help keep barnacles away\u003c\/li\u003e\n\u003cli\u003eHigh solids volume content maximizes surface coverage, reducing application time\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually every solvent-based bottom paint, including those containing tin\u003c\/li\u003e\n\u003cli\u003e32.7% Cuprous Oxide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish: \u003c\/strong\u003eGloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume Solids:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e61%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids by Weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e82%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e300 grams per liter \/ 2.5 lbs. per gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Leach Rate:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5.98 Micrograms\/cm2\/Day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e228-408 sq. ft.\/gal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePack Size: \u003c\/strong\u003e1 US Gallon\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003c\/strong\u003e 1005TF-Black, 1002TF-Blue\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Sea Hawk Islands 44 TF Bottom Paint\u003c\/h2\u003e\n\u003cp\u003eSea Hawk Islands 44 TF Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using Sea Hawk 2053 Reducer. Islands 44 TF has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Semi-Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e:  228-408 Sq Ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Bursh, Rolling, Airless Sprayer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness\u003c\/strong\u003e: 3\/8” Nap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4.0-7.0 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.4-4.3 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50° F Min\/ 95° F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSea Hawk 2053 Reducer (10% maximum)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellpadding=\"5\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDrying Times\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSubstrate Temp.\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTouch Dry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eLaunch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e77° F\u003c\/td\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003ctd\u003e1 hour\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003e12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95° F\u003c\/td\u003e\n\u003ctd\u003e1 hour\u003c\/td\u003e\n\u003ctd\u003e1 hour\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003e12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*The drying times above are based on 4-7 mils wet at 50% humidity\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSurface Preparation and Application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eKnown Compatibility of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply minimum 2 coats of Island 44 TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eUnknown Compatibility of existing antifoulant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePower wash to remove any loose paint or other contaminants.\u003c\/li\u003e\n\u003cli\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/li\u003e\n\u003cli\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e \u003cstrong\u003ePoor condition of existing antifoulant\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/li\u003e\n\u003cli\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF. Allow 3-6 hours between coats and a minimum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eNon-Sanding Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of contaminants.\u003c\/li\u003e\n\u003cli\u003eSand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Island 44 TF. Apply first coat thinned 20% and let dry overnight. Apply two more coats allowing 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel\/Aluminum Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Based Antifoulant Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat.\u003c\/li\u003e\n\u003cli\u003eSeal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF, allow 3-6 hours between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCopper-Free Antifouling Application for Aluminum Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish.\u003c\/li\u003e\n\u003cli\u003eApply minimum of two coats of Island 44 TF, allow 3-6 hours between coats and a minimum overnight dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Sea Hawk Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Sea_Hawk_Mission_Bay_App_Guide.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"38\" height=\"37\"\u003e\u003cstrong\u003eClick here to download Sea Hawk Islands 44 TF Bottom Paint Application Guide\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Black \/ Gal","offer_id":43098116718726,"sku":"S-H-1005TFGL","price":404.93,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098116751494,"sku":"S-H-1002TFGL","price":404.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Sea_Hawk_Islands_44_T_photo__94233.jpg?v=1770148704"},{"product_id":"trilux-33","title":"Interlux Trilux 33 Antifouling Boat Bottom Paint","description":"\u003ch2 class=\"classyunicodedone\"\u003eInterlux Trilux 33 Antifouling Bottom Paint\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFor reliable antifouling on aluminum and fiberglass boats, Trilux 33\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e delivers outstanding multi-season protection\u003c\/strong\u003e.\u003c\/span\u003e\u003cspan\u003e This advanced \u003c\/span\u003e\u003cspan\u003eTrilux 33\u003c\/span\u003e\u003cspan\u003e antifouling paint features a slow-polishing formula that minimizes buildup while keeping hulls smooth and fuel-efficient. Ideal for outboards, sterndrives, and aluminum hulls, its copper-free formula prevents galvanic corrosion, making it a top choice for metal surfaces. It provides long-lasting defense against marine growth in both saltwater and freshwater environments. Easy to apply and highly effective, \u003c\/span\u003e\u003cspan\u003eTrilux 33\u003c\/span\u003e\u003cspan\u003e ensures your boat stays cleaner, longer. \u003c\/span\u003e\u003cspan\u003eAvailable in blue, green, red, or gray.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsidered the safest, most effective antifouling paint for use on aluminum boats, outdrives, and outboards.\u003c\/li\u003e\n\u003cli\u003eFor use on fiberglass, wood, and all underwater metal surfaces.\u003c\/li\u003e\n\u003cli\u003eExclusive Biolux Technology blocks slime.\u003c\/li\u003e\n\u003cli\u003eSlow polishing formula to avoid seasonal paint build-up\u003c\/li\u003e\n\u003cli\u003eAvailable in a range of bright colors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLow sheen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage (Approx):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush\/roller - 399 ft²\/gal   |     Spray - 266 ft²\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e390 g\/lt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors\u003c\/strong\u003e: YBA060 Blue, YBA063 Black, YBA068 White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 US Quart, 1 US Gallon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated Products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterlux Special Thinner\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThinning and cleaning on bare wood\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterlux InterProtect\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEpoxy barrier for blister protection and priming\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterlux Fiberglass Solvent Wash\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo clean bare fiberglass prior to application\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e\n\u003cp\u003eApply the product to clean, dry, and properly prepared surfaces only. Prime metal surfaces with InterProtect or Primocon. Trilux bottom paint should NOT be applied to tin-based paint such as Micron 33. Use at least two coats of Trilux 33 for optimal results.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Brush, roller, airless or conventional spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness per Coat:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 mils (3.6 wet mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e443.7 sq. ft\/gal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e41° F. Min. \/ 95°F. Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSpecial Thinner 216\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"tab_description\"\u003e\n\u003cdiv class=\"tab_content\"\u003e\n\u003ctable id=\"Dry Times\" border=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Touch\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003ctd\u003eTo Launch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e5 HR\u003c\/td\u003e\n\u003ctd\u003e10 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003ctd\u003e20 HR\u003c\/td\u003e\n\u003ctd\u003e30 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Aluminum\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with medium grit emery cloth to a bright metal finish. Wipe clean.\u003c\/li\u003e\n\u003cli\u003eApply one very thin coat of Vinyl-Lux Primewash 353-354.\u003c\/li\u003e\n\u003cli\u003ePrime with InterProtect 2000E\/2001E.\u003c\/li\u003e\n\u003cli\u003eNote: on sandblasted aluminum, the Viny-Lux Primewash can be omitted if priming with InterProtect the same day as blasting.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Interlux Trilux 33 Antifouling Bottom Paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFactory Finished Aluminum\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePrime with Primocon\u003c\/li\u003e\n\u003cli\u003eApply two coats of Interlux Trilux 33\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eScrub well using soap and water and a stiff brush. Rinse with fresh water.\u003c\/li\u003e\n\u003cli\u003eWipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cli\u003eWhile the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned.\u003c\/li\u003e\n\u003cli\u003eNo-Sand System:\u003c\/li\u003e\n\u003cli\u003eApply one thin, continuous coat of Interlux Fiberglass No-Sand Primer.\u003c\/li\u003e\n\u003cli\u003eSanding System:\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper. Remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eWipe with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand with 80 grade paper.\u003c\/li\u003e\n\u003cli\u003eClean with 216 Thinner.\u003c\/li\u003e\n\u003cli\u003eApply the first coat reduced by 10% with Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eFill seams, if necessary, with Seam Compound Brown 30.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eEpoxy Coated Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/li\u003e\n\u003cli\u003eSand with 120 to 180 grade paper.\u003c\/li\u003e\n\u003cli\u003eRemove sanding residue.\u003c\/li\u003e\n\u003cli\u003eWipe with Fiberglass Solvent Wash 202.\u003c\/li\u003e\n\u003cli\u003ePrime with Interprotect 2000E\/2001E.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWith Interlux Trilux 33 Bottom Paint:\u003c\/li\u003e\n\u003cli\u003eSand with 80 grade paper.\u003c\/li\u003e\n\u003cli\u003eOther antifoulings:\u003c\/li\u003e\n\u003cli\u003eSand surface and wipe clean.\u003c\/li\u003e\n\u003cli\u003ePrime with Primocon.\u003c\/li\u003e\n\u003cli\u003eRemove antifouling paint in poor condition with Interstrip Semi-Paste 299E.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Tips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirless spray pressure should be 170-204 bar\/2500-3000 psi. Use tip size 0.53 mm\/21 thousand.\u003c\/li\u003e\n\u003cli\u003eFor conventional spray, pressure pot pressure should be 3.44-4.47 bar\/50-65 psi (gun pressure); 10-15 psi (pot pressure).\u003c\/li\u003e\n\u003cli\u003eConventional spray tip size should be 1.8-2.2mm\/70-85 thou.\u003c\/li\u003e\n\u003cli\u003eBare wood applications should get 3 coats of Interlux Trilux 33.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Trilux_33.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Trilux_33.pdf\"\u003eClick to Download Interlux Trilux 33 Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Black \/ Qt","offer_id":43098114130054,"sku":"ILX-YBA063Q","price":109.63,"currency_code":"USD","in_stock":true},{"title":"Black \/ Gal","offer_id":43098114162822,"sku":"ILX-YBA063G","price":372.79,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Qt","offer_id":43098114195590,"sku":"ILX-YBA060Q","price":109.43,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098114228358,"sku":"ILX-YBA060G","price":372.79,"currency_code":"USD","in_stock":true},{"title":"White \/ Qt","offer_id":43098114261126,"sku":"ILX-YBA068Q","price":109.63,"currency_code":"USD","in_stock":true},{"title":"White \/ Gal","offer_id":43098114293894,"sku":"ILX-YBA068G","price":372.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Trilux33_1GLUS__08369.jpg?v=1770147893"},{"product_id":"unepoxy-hrt","title":"Pettit Unepoxy HRT Bottom Paint","description":"\u003cdiv id=\"description-tab\" class=\"productView-description\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePettit Unepoxy HRT Bottom Paint\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePettit Unepoxy HRT is formulated to provide outstanding protection at a very affordable price. Unepoxy HRT has a smooth durable finish that is able to withstand beaching, trailering, and season long abuse. This antifouling paint uses the latest technology available to create a hybrid paint film that's strong enough to handle the tough marine environment without building up over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHRT: Hybrid Reactive Technology\u003c\/strong\u003e features high density biocide utilization to maximize effectiveness, along with film modifiers to reduce yearly build-up, maintain color consistency, and lower weight.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeasonal antifouling\u003c\/li\u003e\n\u003cli\u003eEconomical hybrid protection\u003c\/li\u003e\n\u003cli\u003eSmooth durable polishing finish\u003c\/li\u003e\n\u003cli\u003eCompatible over most bottom paints\u003c\/li\u003e\n\u003cli\u003eDurable finish withstands beaching, trailering, and season long abuse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColors Available:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1211 Blue, 1311 Green, 1611 Red, 1811 Black\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow Much Pettit Unepoxy HRT Do I Need for My Boat?\u003c\/h2\u003e\n\u003cp\u003eRefer to the chart below to calculate how much Unepoxy HRT paint you will need for your boat.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Unepoxy HRT Application Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Unepoxy HRT Application Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e\n\u003cli\u003eDivide that number (your square foot total) by the amount of coverage Unepoxy HRT provides. (500 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Unepoxy HRT has a coverage of 500 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eHow to Apply Pettit Unepoxy HRT\u003c\/h2\u003e\n\u003cp\u003eUnepoxy HRT is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 5-10% using \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003e120 Brushing Thinner\u003c\/a\u003e\u003c\/span\u003e. Unepoxy HRT has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 500 ft2\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, roller, airless or conventional spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Roller Thickness:\u003c\/strong\u003e 3\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e 1 minimum per season with additional coat at waterline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Film Thickness:\u003c\/strong\u003e 3.75 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness:\u003c\/strong\u003e 1.5 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e 50°F Min. \/ 90°F Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e \u003cspan\u003e\u003ca title=\"Pettit 120 Brushing Thinner\" href=\"https:\/\/www.wholesalemarine.com\/pettit-120-paint-brushing-thinner-quart.html\" target=\"_blank\"\u003e120 Brushing Thinner\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Do not apply Unepoxy HRT on aluminum hulls or outdrives**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor old hard and ablative bottom paints, begin by thoroughly wiping down the surface with 120 Brushing Thinner. Pay extra attention to waterline areas. Then sand the painted surface with 80 grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eOld tin or copper copolymers, or Teflon-based antifouling paints should be sanded thoroughly with 80 grit sandpaper to remove the chalky outer surface. Wipe clean ten apply one coat of Unepoxy HRT.\u003c\/li\u003e\n\u003cli\u003eSoft, sloughing antifouling paints should be removed before applying Unepoxy HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-bio-blue-marine-hull-surface-prep-79179.html\" target=\"_blank\"\u003e92 Bio-Blue Hull Surface Prep\u003c\/a\u003e\u003c\/span\u003e or de-waxed several times with \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-eco-hrt-copper-free-bottom-paint\/\" target=\"_blank\"\u003ePettit D-95 Dewaxer\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Sanding Method (1): \u003c\/strong\u003ePrep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit D95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip- Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three thin coats of Unepoxy HRT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Sanding Method (2): \u003c\/strong\u003eThoroughly clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a course Scotch-Brite pad in a swirling motion. Thoroughly rinse all residue from surface and let dry. Then apply one coat of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-gray-high-build-epoxy-barrier-primer-coat\/\" target=\"_blank\"\u003ePettit-Protect High Build Epoxy Primer\u003c\/a\u003e\u003c\/span\u003e. Consult the primer label for complete application and antifouling top coating instructions. Apply two thin coats of Unepoxy HRT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBare wooden hulls should be sanded thoroughly with 80 grit sandpaper and wiped clean of sanding residue.\u003c\/li\u003e\n\u003cli\u003eApply a coat of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-eco-hrt-copper-free-bottom-paint\/\" target=\"_blank\"\u003e6627 Tie-Coat Primer\u003c\/a\u003e\u003c\/span\u003e thinned 25% with \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-epoxy-marine-thinner.html\" target=\"_blank\"\u003e97 Epoxy Thinner\u003c\/a\u003e\u003c\/span\u003e directly to the bare wood. Allow 4 hours to dry.\u003c\/li\u003e\n\u003cli\u003eApply two un-thinned coats of Unepoxy HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Hulls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface to remove grease a dirt; remove loose rust and scale from the metal surface.\u003c\/li\u003e\n\u003cli\u003eScrape, sandblast or wire brush to 2-3 mil profile. Blow off residue.\u003c\/li\u003e\n\u003cli\u003eApply one or two coats of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-rustlok-steel-anti-corrosive-marine-primer\/\" target=\"_blank\"\u003ePettit 6980 Rustlok Primer\u003c\/a\u003e\u003c\/span\u003e followed by two coats of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-protect-high-build-epoxy-barrier-marine-primer-coat-79178.html\" target=\"_blank\"\u003ePettit 4700\/4701 High Build Epoxy Primer.\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFollow with Unepoxy HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUnderwater Metal Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent clean then abrade to clean bright metal by sanding with 60-80 grit sandpaper, sandblasting or wire brushing.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of \u003cspan\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/pettit-prop-coat-barnacle-barrier-aerosol\/\" target=\"_blank\"\u003eProp Coat Barnacle Barrier 1792\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin coats of Unepoxy HRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbove information sourced from Pettit's Unepoxy HRT Bottom Paint Application Instructions\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Pettit-Unepoxy-HRT-Antifouling-Paint-Application-Instructions.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn3.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"80\" height=\"77\"\u003e\u003cspan\u003e\u003cstrong\u003eClick to Download Pettit Unepoxy HRT Bottom Paint Application Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCalifornia Residents:\u003cspan\u003e \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/7a6987c0-e35a-013e-5580-6a7fee461443\/e\/4e5d3560-dab8-013e-a88a-12df8f8cb346\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCancer and Reproductive Harm -\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pettit Paint","offers":[{"title":"Black \/ Gal","offer_id":43098115440774,"sku":"PET-1811G","price":143.36,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Gal","offer_id":43098115473542,"sku":"PET-1211G","price":143.36,"currency_code":"USD","in_stock":true},{"title":"Green \/ Gal","offer_id":43098115506310,"sku":"PET-1311G","price":143.36,"currency_code":"USD","in_stock":true},{"title":"Red \/ Gal","offer_id":43098115539078,"sku":"PET-1611G","price":143.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/files\/Unepoxy_HRT_Bottom_Paint__53039.jpg?v=1770147622"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/2819\/4438\/collections\/Hydrocoat_Eco_Ablative_Antifouling_Paint__35743.jpg?v=1770763580","url":"https:\/\/truewindmarine.com\/collections\/ablative-bottom-paints.oembed?page=2","provider":"True Wind Marine","version":"1.0","type":"link"}